2014 VOLKSWAGEN TOUAREG navigation

229

Fig. 135 Navigation settings.

243
Settings main menu (CAR)

Fig. 142 Infotainment system with navigation: Settings main menu (CAR).

Fig. 143 Infotainment system without navigation: Settings main menu (CAR).

Navigation data (VCards etc.) can only be read via the Directory menu ⇒ page 299.
WARNING
Inserting data media when the vehicle is moving can distract you from the road and lead to accidents. Always keep the storage compartment closed when the vehicle is moving.
NOTICE
The memory card slot's locking mechanism and the memory card can be damaged by incorrect insertion of a memory card or by inserting a incompatible memory card!
x When inserting a card, make sure it is correctly positioned.
x Excessive pressure can destroy the locking mechanism in the memory card slot.
x Only use suitable memory cards
If you insert a number of different CDs and DVDs and receive the message Drive error every time, contact a qualified workshop.
Loading external DVD changer

Introduction to navigation

Navigation data
All navigation data required for navigation is stored in the unit navigation data memory.
Street routing is subject to ongoing changes like, for example, new streets, street names or street numbers. The route guidance may be inaccurate or incorrect if the navigation data is no longer up to date. You should therefore have the unit navigation data memory updated by a Volkswagen dealership on a regular basis. The updates are subject to a fee.
Possible errors in navigation
When the navigation system cannot receive any data from GPS satellites (dense canopy of trees, tunnel, underground car park), navigation can still continue using the vehicle sensors.
In areas that are not or only incompletely digitized on the data medium (such as one-way streets and street type not sufficiently captured), the navigation system also tries to enable route guidance.
Please remember that the navigation may sometimes not be so accurate as usual if the precise vehicle position cannot be determined.
Navigation main menu

Fig. 169 Navigation main menu: Destination mode.

Fig. 170 Navigation main menu: Tour mode.

x Press the NAV Infotainment button twice in quick succession. After changing to the map display, the main menu Navigation is displayed.
x Press the E function key to switch menu by menu from a navigation submenu to the Navigation main menu.
x You can switch back and forth between the map view and the Navigation main menu by pressing the NAV Infotainment button.
The Navigation main menu is displayed either in “normal” Destination mode or in Tour mode or as the
Waypoint navigation menu ⇒ fig. 210.
If Tour mode ⇒ fig. 170 is displayed.
If the Waypoint navigation menu is displayed.
Display of the last destination
In the upper third of the screen, the destination last used as route guidance is displayed.
x Briefly touch the display box to show the displayed destination in the detailed view.
x Press the New destination function key followed by the + Address function key to show the displayed destination in the Address entry menu and edit it.
If no destination is displayed, this means no route guidance has been started or that the destination memory has been deleted manually
Function keys in the Navigation main menu

Function key: Effect
Options : Defines route options for calculating a route
Position : Opens the current position in the detailed view and displays the coordinates.
Store : Stores the displayed position in the destination memory
$: Stores the current position as a “Flagged destination” in the destination memory
: Enter home address or show home address in the Navigation main menu
New destination : Opens the selection menu for entry of destination
Memory : Opens a pop-up window for storing the current destination, loading stored destinations or managing destinations
Route : Opens options for route guidance
Route list : Shows street names or street designations of the route section to be driven.
Remove area to avoid : Removes an entered route exclusion.
Avoid area : To enter a route exclusion.
Extras : Opens a pop-up window.

New stopover : For entering a stopover
Tour mode : For switching to tour mode in order to drive to several destinations during route guidance
Waypoint mode : For navigation in off-road areas (waypoint navigation)
Start : Starts route guidance to the displayed destination

When narrowing down the destination address, please note that every entry restricts the available range of subsequent selections. For instance, if the street you are looking for is not in the zip code area you have selected in a previous window, you will not be able to find the street at the street selection stage.
Finishing destination input
x Press the Start route guidance function key to start route guidance to the entered destination
⇒ page 324.
x OR: Press the Store in directory function key to store the destination in the destination memory
⇒ page 298.
Address entry menu

Fig. 174 Navigation main menu with destination.

Fig. 175 Address input menu with destination address.

Response Effect
In the Search for points of interest menu, press the Search for name function key
⇒ fig. 176.
Search for points of interest across the country and in all categories.
Press the Search function key in a list to select a
point of interest category ⇒ fig. 178.
Search for points of interest within the previously selected search area.
In a list of found points of interest, press the Options function key and then the Search for
name function key ⇒ fig. 179.
Search for points of interest within the displayed selection of points of interest.

x Enter the keyword for the point of interest search in the subsequent input window
Correct spelling of entries is important. In the same way as when selecting a destination address, it is only possible to make entries that correspond with a point of interest stored in the navigation data.
In some lists, the Options interface can be used to put special objects into alphabetical order, according to trade names or categories.
Selecting special and favorite destinations from the map