2014 TOYOTA RAV4 lights

[x] Cancel search: lights

Page 576 of 732

TOYOTA RAV4 2014 XA40 / 4.G Owners Manual 576
RAV4_OM_OM42A04U_(U)
6-3. Do-it-yourself maintenance
■Engine compartment 
Fuse layout and amperage ratings
FuseAmpereCircuit
1RADIO20Audio system
2ECU-B NO.110
Wireless remote control, steering

Page 577 of 732

TOYOTA RAV4 2014 XA40 / 4.G Owners Manual RAV4_OM_OM42A04U_(U)
5776-3. Do-it-yourself maintenance
6
Maintenance and care
11RDI FAN30Electric cooling fans
12ABS NO.150Vehicle stability control
13HTR50Air conditioning system
14H-LP-MAIN50H-LP R

Page 579 of 732

TOYOTA RAV4 2014 XA40 / 4.G Owners Manual RAV4_OM_OM42A04U_(U)
5796-3. Do-it-yourself maintenance
6
Maintenance and care
■Under the instrument panel
FuseAmpereCircuit
1STOP7.5Stop lights
2S/ROOF10Moon roof
3AM15IG1 NO.1, IG1 NO.2, IG1 NO.3,

Page 580 of 732

TOYOTA RAV4 2014 XA40 / 4.G Owners Manual 580
RAV4_OM_OM42A04U_(U)
6-3. Do-it-yourself maintenance
18ACC7.5
Power outlets, audio system, outside rear
view mirrors, main body ECU, clock,
electric current sensor
19PA N E L7.5
VSC OFF switch, in

Page 581 of 732

TOYOTA RAV4 2014 XA40 / 4.G Owners Manual RAV4_OM_OM42A04U_(U)
5816-3. Do-it-yourself maintenance
6
Maintenance and care
28A/B7.5SRS airbag system ECU, front passen-
ger occupant classification system ECU
29METER5Gauges and meters
30ECU-IG NO

Page 583 of 732

TOYOTA RAV4 2014 XA40 / 4.G Owners Manual RAV4_OM_OM42A04U_(U)
5836-3. Do-it-yourself maintenance
6
Maintenance and care
■After a fuse is replaced
●If the lights do not turn on even after the fuse has been replaced, a bulb may
need replac

Page 585 of 732

TOYOTA RAV4 2014 XA40 / 4.G Owners Manual RAV4_OM_OM42A04U_(U)
5856-3. Do-it-yourself maintenance
6
Maintenance and care
■Rear
Tail light
Back-up light
Rear turn signal lightStop/tail light and rear side
marker light
License plate lights1
2

Page 588 of 732

TOYOTA RAV4 2014 XA40 / 4.G Owners Manual 588
RAV4_OM_OM42A04U_(U)
6-3. Do-it-yourself maintenance
Set the connector.
After installing the connector,
shake the bulb base gently to
check that it is not loose.
Set the connector and install
the