2014 TOYOTA LAND CRUISER Navigation Manual

273
1. AUDIO/VIDEO SYSTEM OPERATION
5
AUDIO/VIDEO SYSTEM
L/C200_Navi_OM60L27U_(U)
13.06.03 19:41
■DESCRIPTION OF DVD VIDEO SET-
TINGS
When is selected, the previous
screen is displayed.
■SEARCHING BY TITLE
1Select “Search” on the settings
screen.
2Enter the title number and select
“OK”.
The player starts playing video for that title
number.
When the or button is pressed,
a chapter can be selected.
If the wrong numbers are entered, select
to delete the numbers.
When is selected, the previous
screen is displayed.
■CHANGING THE SUBTITLE LAN-
GUAGE
1Select “Subtitle” on the settings
screen.
2Each time “Subtitle” is selected, the
language the subtitles are displayed in
is changed.
When “Hide” is selected, the subtitles can
be hidden.
When is selected, the previous
screen is displayed.
■CHANGING THE AUDIO LAN-
GUAGE
1Select “Audio” on the settings screen.
2Each time “Audio” is selected, the au-
dio language is changed.
When is selected, the previous
screen is displayed.
No.FunctionPage
Select to display the ini-
tial setup screen.274
Select to display the an-
gle selection screen.274
Select to display the sub-
title selection screen.273
Select to display the au-
dio selection screen.273
Select to display the pre-
determined scene on the
screen and start playing.
—
Select to display the title
search screen.273

274
1. AUDIO/VIDEO SYSTEM OPERATION
L/C200_Navi_OM60L27U_(U)
13.06.03 19:41
■CHANGING THE ANGLE
1Select “Angle” on the settings screen.
2Each time “Angle” is selected, the an-
gle is changed.
When is selected, the previous
screen is displayed.
■SETUP MENU
1Select “Setup” on the settings screen.
2Select the items to be set.
3After the initial setting has been
changed, select “OK”.
This screen will close, and the system will
return to the previous screen.
When “Default” is selected, all menus are
initialized.
The angle can be selected for discs
that are multi-angle compatible when
the angle mark appears on the screen.The initial setting can be changed.
There are initial setting buttons on the
“Setup Menu 1” and “Setup Menu 2”
screens.

275
1. AUDIO/VIDEO SYSTEM OPERATION
5
AUDIO/VIDEO SYSTEM
L/C200_Navi_OM60L27U_(U)
13.06.03 19:41
■AUDIO LANGUAGE
1Select “Audio Language” on the
“Setup Menu 1” screen.
2Select the desired language to be
heard on the “Audio Language”
screen.
If the desired language to be heard cannot
be found on this screen, select “Other”
and enter a language code. For entry of a
language code, see “ENTER AUDIO/
SUBTITLE/MENU LANGUAGE CODE” on
page 230.
To return to the “Setup Menu 1” screen,
select .
3Select “OK” on the “Setup Menu 1”
screen.
■SUBTITLE LANGUAGE
1Select “Subtitle Language” on the
“Setup Menu 1” screen.
2Select the desired language to be read
on the “Subtitle Language” screen.
If the desired language to be heard cannot
be found on this screen, select “Other”
and enter a language code. For entry of a
language code, see “ENTER AUDIO/
SUBTITLE/MENU LANGUAGE CODE” on
page 230.
To return to the “Setup Menu 1” screen,
select .
3Select “OK” on the “Setup Menu 1”
screen.
■DVD LANGUAGE
1Select “DVD Language” on the
“Setup Menu 1” screen.
2Select the desired language to be read
on the “DVD Language” screen.
If the desired language to be heard cannot
be found on this screen, select “Other”
and enter a language code. For entry of a
language code, see “ENTER AUDIO/
SUBTITLE/MENU LANGUAGE CODE” on
page 230.
To return to the “Setup Menu 1” screen,
select .
3Select “OK” on the “Setup Menu 1”
screen.
■ANGLE MARK
1Select “Angle Mark” on the “Setup
Menu 1” screen.
2Select “ON” or “OFF”.
3Select “OK” on the “Setup Menu 1”
screen.
The audio language can be changed.
The subtitle language can be changed.The language on the DVD video menu
can be changed.
The multi-angle mark can be turned on
or off on the screen while discs that are
multi-angle compatible are being
played.

276
1. AUDIO/VIDEO SYSTEM OPERATION
L/C200_Navi_OM60L27U_(U)
13.06.03 19:41
■PARENTAL LOCK
1Select “Parental Lock” on the “Setup
Menu 1” screen.
2Enter the 4-digit personal code on the
“Enter Key Code” screen.
If the wrong numbers are entered, select
to delete the numbers.
To return to the “Setup Menu 1” screen,
select .
3Select a parental level (1-8) on the “Se-
lect Restriction Level” screen.
To return to the “Setup Menu 1” screen,
select .
4Select “OK” on the “Setup Menu 1”
screen.
■SOUND DYNAMIC RANGE
1Select “Sound Dynamic Range” on
the “Setup Menu 2” screen.
2Select “MAX”, “STD” or “MIN”.
3Select “OK” on the “Setup Menu 2”
screen.
■ENTER AUDIO LANGUAGE CODE
1Enter the 4-digit language code.
If the wrong numbers are entered, select
to delete the numbers.
To return to the “Setup Menu 1” screen,
select .
2Select “OK”.
3Select “OK” on the “Setup Menu 1”
screen.
■SETUP OPERATION FROM THE
FRONT SEAT
Rear passengers can cancel this setup
operation by selecting “Play”. The player
will resume normal play.
Likewise, a front passenger can cancel a
rear passenger’s selection of the setup
menu.
The level of viewer restrictions can be
changed.
The difference between the lowest vol-
ume and the highest volume can be
adjusted.If “Other” on the “Audio Language”
screen, “Subtitle Language” screen or
“DVD Language” screen is selected,
the desired language to be heard or
read can be selected by entering a lan-
guage code. (See page 230.)
This screen appears when a front pas-
senger selects the setup menu.

277
1. AUDIO/VIDEO SYSTEM OPERATION
5
AUDIO/VIDEO SYSTEM
L/C200_Navi_OM60L27U_(U)
13.06.03 19:41
If “Check DISC” appears on the display:
It indicates that the disc is dirty, damaged,
or it was inserted upside down. Clean the
disc or insert it correctly. If a disc which is
not playable is inserted, “Check DISC” will
also appear on the screen. For appropriate
discs for the player, see “AUDIO/VIDEO
SYSTEM OPERATING HINTS” on page
283.
If “Region code error” appears on the
display: It indicates that the DVD region
code is not set properly. Insert a disc with
a region code of “ALL” or “1”.
If “DISC error” appears on the display:
The following causes are possible.
• There is a problem inside the system.
Eject the disc.
• The inside of the player unit may be too
hot due to a very high ambient tempera-
ture. Eject the disc and allow the player
to cool down.
If “No music files found.” appears on
the display: It indicates that the iPod or
USB has no playable data.
If the malfunction is not rectified: Take
your vehicle to your Toyota dealer.
1Open the cover and connect audio/
video device.
The A/V input port is composed of 3 input
ports.
IF THE REAR SEAT
ENTERTAINMENT SYSTEM
MALFUNCTIONS
If the rear seat entertainment system
malfunctions, the system will display a
message.
These are described below.USING THE VIDEO MODE
USING THE PORT
ColorFunction
Ye l l o wVideo input port
WhiteLeft channel audio input port
RedRight channel audio input port
The rear seat entertainment system
plays videos and sound when audio-
video equipment is connected to the A/V
input port. For details, refer to the manu-
facturer’s instructions.
NOTICE
●When the A/V input port is not in use,
keep the A/V input port cover closed.
Inserting anything other than an appro-
priate plug may cause electrical failure
or a short circuit.

278
1. AUDIO/VIDEO SYSTEM OPERATION
L/C200_Navi_OM60L27U_(U)
13.06.03 19:41
1Press the “SOURCE” button, or select
“A/V” on the source screen to change
to video mode.
1Press the “SETTING” button.
2Turn “PAL VIDEO” on when PAL for-
mat equipment is connected to the A/V
input port.
The “PAL VIDEO” indicator is highlighted.
1Press the “SETTING” button.
2Select “LCD AI”.
The “LCD AI” indicator is highlighted.
SELECTING THE VIDEO MODE
CHANGING SETTINGS
CHANGING TO PAL FORMAT
SETTING LCD AI
Automatically determines the tone of
the video image and sets the contrast
to an optimum level, displaying a sharp
image.
INFORMATION
●Because the image quality is automati-
cally adjusted when the “LCD AI” indi-
cator is on, brightness and contrast
adjustment becomes less effective.

279
1. AUDIO/VIDEO SYSTEM OPERATION
5
AUDIO/VIDEO SYSTEM
L/C200_Navi_OM60L27U_(U)
13.06.03 19:41
1Press the “SETTING” button on the
controller.
2Select “Screen Size” tab.
3Select “Normal”, “Wide 1” or
“Wide 2”.
1Press the “SETTING” button.
2Select the desired button to adjust col-
or, tone, contrast and brightness. After
adjusting the screen, select “OK”.
SETTING THE DISPLAY MODE
ADJUSTING THE SCREEN
Screen buttonFunction
“Contrast”
“+”Select to strengthen the
contrast of the screen.
“Contrast”
“-”Select to weaken the
contrast of the screen.
“Brightness”
“+”Select to brighten the
screen.
“Brightness”
“-”Select to darken the
screen.
“Color” “R”Select to strengthen the
red color of the screen.
“Color” “G”Select to strengthen the
green color of the
screen.
“Tone” “+”Select to strengthen the
tone of the screen.
“Tone” “-”Select to weaken the
tone of the screen.

280
1. AUDIO/VIDEO SYSTEM OPERATION
L/C200_Navi_OM60L27U_(U)
13.06.03 19:41
1Press the “SETTING” button on the
controller.
2Select “TILT” tab.
3Select “Auto Close”.
If “Auto Close” is on, the display will
automatically close when the “ENGINE
START STOP” switch is turned OFF.
AUTOMATIC CLOSING OF THE
REAR DISPLAY
INFORMATION
●The display will automatically open
when the “ENGINE START STOP”
switch is turned to ACCESSORY or
IGNITION ON mode.