Available 24 hours every day
ROADSIDE ASSISTANCE
INSTRUCTIONS FOR TRANSPORTERS CONTINUED
Connect the Tow Chain
The method used to connect the tow chain depends on whether Model S is equipped with a towing eye.
Attach the tow chains to the large hole on each of
the rearmost lower suspension arms , underneath
the front of the vehicle.
Pl
ace a 2” x 4” piece of wood between the tow
chains and the underbody.
CAUTION: Before pulling, position the wood
between the tow chain and the underbody to
protect the underbody from any damage that
could be caused by the tow chain.
Lower Suspension Arms
Remove the nose cone by inserting a plastic
pry tool into the top right corner, then gently
prying the nose cone toward you. When the
clip releases, pull the nose cone toward you,
without twisting or bending it, to release the
three remaining clips.CAUTION: Do not use a metal object
(such as a screwdriver). Doing so can
damage the nose cone and the
surrounding area.
Towing Eye (if equipped)
Fully insert the towing eye (found in the front
trunk) into the opening on the right side, then
turn it counter-clockwise until securely
fastened. When secure, attach the tow chain
to the towing eye.
CAUTION: Before pulling, make sure
the towing eye is securely tightened.
Model S Quick Guide - NA Rev C.book Page 2 Wednesday, December 18, 2013 12:40 PM
