17B-167
AFTER REPAIRDeal with any other faults. Clear the fault memory.
Switch off the ignition and perform a road test followed by a check using the diagnostic
tool.
V12 MR-372-J84-17B000$765.mif
17B
SAGEM 3000
Program No.: A7
Vdiag No.: 44, 48
SC006
RUN OBD TEST: CATALYTIC CONVERTER
NOTESIMPORTANT:
Do not perform this test with a new catalytic converter.
Repair all the electrical faults and clear them from the memory.
Program the flywheel target ET089 Programming the engine flywheel target.
Check the appearance and condition of the catalytic converter.
Check there are no air leaks, thermal shock, misfiring, coolant or oil consumption.
It is preferable to run this command with a warm engine. This reduces the time it takes
for the catalytic converter to heat up.
The purpose of this command is to determine the condition of the catalytic converter
Procedure:
– Engine stopped.
– Run command SC006.
– Start the vehicle without losing the + after ignition feed
– Wait for the command result.
At the end of this test, four different results are possible:
–Status 1: Fault finding not carried out/impossible to obtain the necessary conditions.
–Status 2: Component in an average condition.
–Status 3: Component in good condition.
–Status 4: Component in poor condition.
When the command is complete and after the result has been read, stop the engine and start it again to obtain the
conditions relating to normal use.
If the result is Status 1: check for any faults, and the engine flywheel target programming using ET089.
If the result is Status 2 or Status 4: replace the catalytic converter.
If the result is Status 3: the catalytic converter is in good condition.
S3000_V44_SC006 / S3000_V48_SC006
JSAA741.0
PETROL INJECTION
Fault finding – Interpretation of commands
PETROL INJECTION
Fault finding – Help17B
17B - 174V12 MR-372-J84-17B000$810.mif
SAGEM 3000
Program No.: A7
Vdiag No.: 44, 48
F4R ENGINE
Values for components with variable electrical resistance:
AIR TEMPERATURE SENSOR
DAV IATS 04 - PIE 7700101451 B
Temperature in °C Electrical resistance in
- 40 49930 ± 15 %
- 10 9540 ± 10 %
25 2050 ± 6 %
50 810 ± 6 %
80 309 ± 6 %
110 135 ± 6 %
120 105 ± 6 %
COOLANT TEMPERATURE SENSOR
SYLEA 402114 02 - PIE 7700113867
Temperature in °C Electrical resistance in
- 40 75780 ± 10 %
- 10 12460 ± 10 %
25 2250 ± 5 %
50 810 ± 5 %
80 283 ± 5 %
110 115 ± 5 %
120 88 ± 5 %
JSAA741.0
