2014 Ram 2500 Owner's Manual

CAUTION!
Make sure the tonneau cover clamp and clamp wire
is in the proper released position. If the clamp and
clamp wire is not properly released, damage to the
tonneau cover material will result.4. Pick up on the tonneau cover and fold it back into the
second panel.
5. Pick up on the cover and fold it back into the third panel.
6. Once in the third panel position pull down on the second set of clamps on both driver and passenger
sides to the semi clamped position.
Improper Clamp Wire Released Position
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 263

7. Pull down on the clamp wire and push the clamp upinto the proper released position. 8. Be sure to clip both stowage straps together to insure
the cover stays together.
Semi Clamped PositionProper Released Position
264 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

9. With two people remove the cover.
NOTE:Be sure the Tonneau Cover has been folded
completely before removing.
Tri-Fold Tonneau Cover Installation
To install the Tonneau Cover follow the following steps:
1. Position the folded Tonneau Cover on the truck bed and push the Cover forward against the front of the
truck bed. The Tonneau Cover centers itself when
placed on the vehicle.
2. Pull down on the first set of clamp handles to release the clamps from the stowed position.
Stowage Strap
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 265

3. Push clamp wires up and under the flange of box (orflange of Ram Box rail, if equipped) to the semi
clamped position. 4. Push clamp handles upward to the clamped position
to properly engage the clamps.
Stowed PositionSemi Clamped Position
266 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

NOTE:Once clamped, be sure the clamps are not par-
tially clamped to the truck bed flange. 5. Disengage the stowage straps.
6. Unfold Tonneau Cover to the intermediate position.
Clamped PositionImproper Clamp Position
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 267

NOTE:The vehicle cannot be driven when the Tonneau
Cover is in this position.
7. Completely unfold the Tonneau Cover. 8. Pull down on the second set of clamp handles to
release the clamps from the stowed position.
Intermediate Position (Vehicle Cannot Be Driven)
Fully Unfolded Position
268 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

9. Push clamp wires up and under the flange of box (orflange of Ram Box rail, if equipped) to the semi
clamped position. 10. Push clamp handles upward to the clamped position
to properly engage the clamps.
Stowed PositionSemi Clamped Position
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 269

NOTE:Once clamped, be sure the clamps are not par-
tially clamped to the truck bed flange.
Clamped PositionImproper Clamp Position
270 UNDERSTANDING THE FEATURES OF YOUR VEHICLE