2014 Peugeot RCZ run flat

CONTENTS
RCZ_EN_CHAP00A_SOMMAIRE_ED02-2013
Steering lock - Starting 129Parking brake 130Hill start assist 131Manual gearbox 132
Automatic gearbox 133Gear shift indicator 137Tyre under-inflation detection 138Speed limiter 140
Cruise control 143Parking sensors 146
Fuel tank 150Bonnet 152Petrol engines 153
Diesel engine 154Running out of fuel (Diesel) 155Checking levels 156
Checks 159
Temporary puncture repair kit 161Changing a wheel 168Snow chains 173Changing a wiper blade 174
Energy economy mode 175Battery 176Changing a bulb 178Changing a fuse 186
Towing a vehicle 193Towing a trailer 195Cleaning and maintenance 197Accessories 199
6/DRIVING 129-148
7/CHECKS 149-160
8/PRACTICAL INFORMATION 161-200
ALPHABETICAL INDEX 329-333
VISUAL SEARCH 334-340
Petrol engines 201Weights (petrol) 202Diesel engine 203Weights (Diesel) 204Dimensions 205Identification markings 206
9/TECHNICAL DATA 201-206
Emergency or assistance 207PEUGEOT Connect Media Navigation (NG4 3D) PEUGEOT Connect Media Navigation (NG4 3D) PEUGEOT2 11PEUGEOT Connect Navigation (RT6) 255PEUGEOT Connect Sound (RD5) 309
10/AUDIO EQUIPMENT and TELEMATICS 207-328

8/
PRACTICAL INFORMATION
2. Inflation
 Turn the selector A to the "air" position.
 Uncoil the black pipe H fully.
 Connect the black pipe to the valve of the wheel.
As soon as possible, go to a PEUGEOT dealer or a qualifi ed
workshop.
You must inform the technician that you have used this kit. After
inspection, the technician will advise you on whether the tyre can
be repaired or if it must be replaced.
 Connect the compressor's electric plug to the vehicle's 12 V socket.
 Start the vehicle again and leave the engine running.  Adjust the pressure using the compressor (to infl ate: switch
B
in position "I" ; to defl ate: switch B in position "O" and press
button C ), in accordance with the vehicle's tyre pressure label
(located on the left hand door aperture).
A loss of pressure indicates that the puncture has not been fully plugged; contact a PEUGEOT dealer or qualifi ed workshop for
assistance.
 Remove and stow the kit.
 Drive at reduced speed (50 mph [80 km/h] max) limiting the distance travelled to approximately 120 miles (200 km).

8/
PRACTICAL INFORMATION
CHECKING TYRE PRESSURES /
INFLATING ACCESSORIES
You can also use the compressor, without injecting any product, to:
- check or adjust the pressure of your tyres,
- infl ate other accessories (balls, bicycle tyres...).
 Turn the selector A to the "Air" position.
 Uncoil the black pipe H fully.
 Connect the black pipe to the valve of the wheel or accessory.
If necessary, fi t one of the adaptors supplied with the kit fi rst.  Connect the compressor's electrical connector to the vehicle's 12 V
socket.
 Start the vehicle and let the engine run.
 Adjust the pressure using the compressor (to infl ate: switch B
in position "I" ; to defl ate: switch B in position "O" and press
button C ), according to the vehicle's tyre pressure label or the
accessory's pressure label.
 Remove the kit then stow it.