2014 Peugeot RCZ height adjustment

8
RCZ_EN_CHAP00B_PRISE EN MAIN_ED02-2013
INSTRUMENTS AND CONTROLS
1. Cruise control / speed limiter switches.
2. Steering wheel adjustment control.
3. Lighting and direction indicator control stalk.
4. Instrument panel.
5. Driver's airbag.
Horn.
6. Gear lever.
7. Parking brake.
8. Bonnet release.
9. Fusebox.
10. Manual headlamp height adjustment.
11 . Side adjustable air vent.
12. Speaker (tweeter).

64
65
FAMILIARISATION
RCZ_EN_CHAP00B_PRISE EN MAIN_ED02-2013
SITTING COMFORTABLY
FRONT SEATS
Forwards-backwards Height
MANUAL ADJUSTMENTS
ELECTRIC ADJUSTMENTS
Seat back angle

84
66
66
68
67
12
RCZ_EN_CHAP00B_PRISE EN MAIN_ED02-2013
SITTING COMFORTABLY
FRONT SEATS
Other functions available...
Lumbar adjustment.
As a safety precaution, these
operations must only be carried out
when stationary.
Heated seats.
STEERING WHEEL ADJUSTMENT
1. Release the adjustment mechanism.
2. Adjust for height and reach.
3. Lock the adjustment mechanism.
FRONT ARMREST
For your comfort, the height and the
longitudinal position of the front armrest can
be adjusted.
It also offers a storage compartment.
Storing of driving positions (driver's electric
seat).

64
FRONT SEATS
Seat with integral head restraint, consisting of a seat cushion and a se\
at
back which can be adjusted to adapt your position for ease of driving
and comfort.
MANUAL ADJUSTMENTS
Forwards-backwards adjustment Driver's or passenger's seat height adjustment
Seat back angle adjustment
 Raise the control bar and slide the seat forwards or backwards.  Pull the control lever upwards to raise or push it downwards to
lower, as many times as necessary, to obtain the position required.
 Turn the knob to set the angle required.
Before moving the seat backwards, ensure that there is nothing
that might prevent the full travel of the seat, so as to avoid the risk \
of of jamming the seat caused by the presence of objects on the
fl oor behind the seat or rear passengers. If the seat jams, stop the
movement immediately.

3/
EASE OF USE and COMFORT
FRONT SEATS
Seat with integral head restraint,consisting of a seat cushion and a sea\
t
back which can be adjusted to adapt your position for ease of driving
and comfort.
ELECTRIC ADJUSTMENTS
Forwards-backwards adjustment Seat cushion height adjustment
 Push the control forwards or rearwards to slide the seat.  Tilt the rear part of the control upwards or downwards to obtain the
required height.
The electrical functions of the seat are deactivated approximately
one minute after the ignition is switched off.
To reactivate them, switch on the ignition.
Carry out these adjustments with the engine running to avoid
discharging the battery.
Seat back angle adjustment
 Tilt the control forwards or rearwards to adjust the angle of the seat
back.
Before moving the seat backwards, ensure that there is nothing
that might prevent the full travel of the seat, so as to avoid the risk \
of of jamming the seat caused by the presence of objects on the
fl oor behind the seat or rear passengers. If the seat jams, stop the
movement immediately.

68
STEERING WHEEL ADJUSTMENT
 When stationary , pull the control lever to release the adjustment mechanism.
 Adjust the height and reach to suit your driving position.
 Push the control lever to lock the adjustment mechanism.
As a safety precaution, these operations should only be carried
out with the vehicle stationary.

84
FRONT ARMREST
Comfort and storage device for the driver and front passenger.
The height and length of the armrest cover can be adjusted.
 Raise the cover to the required position (low, intermediate or high).
 If you raise the cover slightly beyond the high position, guide it when lowering it to the low position.
LONGITUDINAL ADJUSTMENT
 Slide the cover fully forwards or rearwards.
STORAGE
 Raise the lever.
 Raise the cover fully.
HEIGHT ADJUSTMENT

4/
VISIBILITY
RCZ_EN_CHAP04_VISIBILITE_ED02-2013
MANUAL ADJUSTMENT OF
HALOGEN HEADLAMPS
AUTOMATIC ADJUSTMENT OF
XENON HEADLAMPS
To avoid dazzling other road users, the height of the halogen bulb
headlamps must be adjusted according to the load in the vehicle.
0. 1 or 2 people in the front seats.
-. 3 people.
1. 4 people.
-. Intermediate setting.
2. 4 people + maximum authorised loads.
-. Intermediate setting.
3. Driver + maximum authorised loads. In order to avoid causing a nuisance to other road users, this system
corrects the height of the xenon headlamp beams automatically and
when stationary, in relation to the load in the vehicle.
If a malfunction occurs, this warning lamp is displayed on the
instrument panel, accompanied by an audible signal and a
message in the screen.
The system then places your headlamps in the lowest position.
Initial setting is position "0". Do not touch the xenon headlamp bulbs.
Contact a PEUGEOT dealer or a qualifi ed workshop.
Travelling abroad
If using your vehicle in a country that drives on the other side of
the road, the headlamps must be adjusted to avoid dazzling on-
coming drivers.
Contact a PEUGEOT dealer or a qualifi ed workshop.