121
4
Driving
Stop & Start (Auto Stop & Go) function
Operation
Going into engine STOP mode
The "AS &G"
warning lamp comes on in
the instrument panel or the instrument
panel screen and the engine goes into
standby after a few seconds:
- with a manual gearbox
, with the vehicle
stationary and your foot on the brake, when
you put the gear lever into neutral and
release the clutch pedal.
Never refuel with the engine in STOP
mode; you must switch off the ignition
with the key or the START/STOP
button.
When the engine is stopped
automatically, the operation of certain
vehicle systems, such as for example,
braking, power steering... are modified.
Ta k e c a r e
.
Special cases: STOP mode not
available
STOP mode is not invoked when:
- the driver's seat belt is not fastened,
- the bonnet is open,
- the vehicle has not exceeded 3 mph
(5 km/h) since the last engine start,
- the vehicle has restarted less than
10 seconds ago,
- the engine is needed to maintain a
comfortable temperature in the passenger
compartment,
- demisting is active,
- some special conditions (battery charge,
engine temperature, braking assistance,
ambient temperature...) where the engine is
needed to assure control of a system.
- the "AS &G"
warning lamp is
flashing in the instrument panel.
This operation is per fectly normal.
The Stop & Start (Auto Stop & Go) function puts the engine temporarily into standby during stops in the traffic (red lights, traffic jams, or other...).
The engine restarts automatically as soon as you want to move off. The restart takes place instantly, quickly and silently.
Per fect for urban use, the Stop & Start (Auto Stop & Go) function reduces fuel consumption and exhaust emissions as well as the noise level when
stationary.
123
4
Driving
The system is reactivated automatically
at every new start using the key or the
START/STOP button.
Reactivation
Press the "AS &G O FF "
switch again.
The system is active again; this is confirmed by
the "AS &G O FF "
warning lamp going off in the
instrument panel or instrument panel screen.
Operating fault
In the event of a malfunction with the system,
the "AS &G O FF "
warning lamp flashes in the
instrument panel or instrument panel screen,
and the system no longer operates.
Have it checked by a PEUGEOT dealer or a
qualified workshop. This system requires a specific
battery with a special specification
and technology (reference numbers
available from a PEUGEOT dealer or a
qualified workshop).
Fitting a battery not listed by PEUGEOT
introduces the risk of malfunction of the
system.
Maintenance
The "Auto Stop & Go" system makes
use of advanced technology. All work
on this type of battery must be done
only by a PEUGEOT dealer or a
qualified workshop.
In the event of a fault in STOP mode, the
vehicle may stall. The following warning lamps
come on in the instrument panel or instrument
panel screen:
It is then necessary to switch off the ignition,
then restart the engine using the key or the
START/STOP button.
342
Visual search
Exterior
Lighting c ontrols 13 3 -137
Headlamp beam adjustment 139
Welcome lighting 138
Changing bulbs 188 -191
- front lamps
- foglamps
- direction indicator repeaters
Wiper c ontrols 140 -143
Changing a wiper blade 203
Door mirrors 87- 88
Doors 72, 74
- opening / closing
- central locking
Child lock 176
Electric windows 78-79
Alarm 75 -77
Panoramic sunroof 80
Roof bars 209
Accessories 210 -211
Braking assistance 148 -149
Trajectory control 150 -151
Tyre pressures 180, 241
Boot 73
- opening / closing
- emergency release
Temporary puncture repair kit 177-180
Changing a wheel 181-186
- tools
- removing / refitting
Snow chains 187
Changing bulbs 192-193
- rear lamps
- 3rd brake lamp
- number plate lamps
- foglamp
Parking sensors 129 -131
Reversing camera 132
Towbar 207-208
Towing 204-206
Fuel tank 216
Remote control key /
electronic key 62-71
- opening / closing
- anti-theft protection
- battery
