2014 MITSUBISHI OUTLANDER SPORT sensor

Indicator lamp, warning lamp, and information screen display list6-30 Instruments and controls
6
zThe Adaptive Cruise Control System (ACC) control is automatically cancelled and the system is placed in the ‘standby’ state.
Refer to “How to use ACC” on page 7-48.
zConditions for the start of control are not met, the Adaptive Cruise Control System (ACC) can not start the control.zThe Adaptive Cruise Control System (ACC) can not start the control because the speed is out of speed range.zThe Adaptive Cruise Control System (ACC) can not start the control because not detected the approach of the vehicles in front.zThe Adaptive Cruise Control System (ACC) is not available temporarily such as for adhesion of contaminants to the sensor.This is not a malfunction.zThere is a fault in the Adaptive Cruise Control System (ACC).
zWe r e c o m m e n d y o u t o h a v e i t c h e c k e d .Refer to “Adaptive Cruise Control System (ACC)” on page 7-43.
Screen
Cause
Solution (Reference)
BK0203201EN.book 30 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Indicator lamp, warning lamp, and information screen display list
Instruments and controls 6-31
6
zThere is a fault in the Forward Collision Mitigation System (FCM).
zWe r e c o m m e n d y o u t o h a v e i t c h e c k e d .Refer to “Forward Collision Mitigation System (FCM)” on page 7-55.
zFCM braking function of the Forward Col-lision Mitigation System (FCM) has been activated.
Refer to “FCM braking function” on page 7-56.
zThe Forward Collision Mitigation System (FCM) is not available temporarily such as for adhesion of contaminants to the sensor.This is not a malfunction.zThe Lane Departure Warning (LDW) has detected that your vehicle is about to leave or has left the lane.
Refer to “Lane Departure Warning (LDW)” on page 7-60.
zThe Lane Departure Warning (LDW) is not available temporarily for too high a tem-perature of the LDW camera.zThere is a fault in the Lane Departure Wa r n i n g ( L D W ) .
zWe r e c o m m e n d y o u t o h a v e i t c h e c k e d .Refer to “Lane Departure Warning (LDW)” on page 7-60.
Screen
Cause
Solution (Reference)
BK0203201EN.book 31 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Indicator lamp, warning lamp, and information screen display list
Instruments and controls 6-35
6
This informs you that a periodic inspection is due.
zWhen the battery save mode is activated. Refer to “Battery save switch” on page 7-22.zWhen the battery charge mode is activated. Refer to “Battery charge switch” on page 7-23.zWhen the reversing sensor system detect an obstruction.
Refer to “Reversing sensor system” on page 7-63.
zWhen the Forward Collision Mitigation System (FCM) is activated or the timing of an alarm is changed.
Refer to “FCM ON/OFF switch” on page 7-59.
zWhen the Forward Collision Mitigation System (FCM) is deactivated.
Screen
System operation status
Reference
BK0203201EN.book 35 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Combination headlamps and dipper switch
Instruments and controls 6-41
6
Rotate the switch to turn on the lamps.
Rotate the switch to turn on the lamps.
zWhen it rains, or when the vehicle has beenwashed, the inside of the lens sometimesbecomes foggy, but this does not indicate afunctional problem.When the lamp is swit
ched on, the heat will
remove the fog. However, if water gathersinside the lamp, we recommend you to havechecked.
Ty p e 1 OFF All lamps off
Position, tail, licence plate, instru-ment panel lamps and downlight onHeadlamps and other lamps go onNOTE
Ty p e 2 OFF All lamps offAUTO
With the operation mode of the power switch is in ON, head-lamps, position, tail, licence plate, instrument panel lamps and down-light turn on and off automatically in accordance with outside light level. All lamps turn off automati-cally when the operation mode is put in OFF.

Position, tail, licence plate, instru-ment panel lamps and downlight onHeadlamps and other lamps go on
NOTE
zThe sensitivity of the automatic on/off con-trol can be adjusted. For further information,contact a MITSUBISHI MOTORS Author-ised Service Point.On vehicles equipped
with Mitsubishi Multi-
Communication System (MMCS), screenoperations can be used to make the adjust-ment.Refer to the separate owner’s manual fordetails.zIf the front fog lamps turn on when they aresupposed to with the
switch in the “AUTO”
position, the lamps turn off automaticallywith operation mode off.zDo not cover the sensor (A) for the automaticon/off control by affixing a sticker or label tothe windscreen.zIf the lamps do not turn on or off with theswitch in the “AUTO”
position, manually
operate the switch and we recommend you tohave your vehicle checked.
BK0203201EN.book 41 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Wiper and washer switch
Instruments and controls 6-47
6
E00508401612
The rear fog lamp can be operated when theheadlamps or front fog lamps turn on.An indicator lamp in the instrument clustercomes on when the rear fog lamp is turnedon.
Turn the knob once in the “ON” direction toturn on the front fog lamps. Turn the knobonce more in the “ON” direction to turn onthe rear fog lamp. To turn the rear fog lampoff, turn the knob once in the “OFF” direc-tion. Turn the knob once more in the “OFF”direction to turn off the front fog lamps. Theknob will automatically return to its originalposition when you release it.
E00507101218E00516901687
The windscreen wipers can be operated withthe operation mode of the power switch inON or ACC.If the blades are frozen to the windscreen orrear window, do not operate the wipers until
NOTE
zThe front fog lamps are automatically turnedoff when the headlamps or tail lamps areturned off. To turn the front fog lamps onagain, turn the knob in
the “ON” direction
after turning on the headlamps or tail lamps.zDo not use fog lamps except in conditions offog, otherwise excessi
ve lamp glare may
temporarily blind oncoming vehicle drivers.
Rear fog lamp switch
*
RHD (Type 2)
NOTE
zThe rear fog lamp is automatically turned offwhen the headlamps or front fog lamps areturned off.zTo t u r n t h e r e a r f o g l a m p o n a g a i n , t u r n t h eknob twice in the “ON” direction after turn-ing on the headlamps.
Wiper and washer switch
CAUTIONzIf the washer is used in cold weather, thewasher fluid sprayed against the glass mayfreeze, which may hinder visibility. Warmthe glass with the de
froster or rear window
demister before using the washer.
Windscreen wipers
NOTE
zTo e n s u r e a c l e a r r e a r w a r d v i e w, t h e r e a rwindow wiper will automatically performseveral continuous
operations if the selector
lever is put in the “R” position while thewindscreen wipers are operating. Refer to “Rear window wiper and washer”on page 6-51.
Except for vehicles equipped with rain sensor
BK0203201EN.book 47 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Wiper and washer switch
Instruments and controls 6-49
6
Can only be used when the operation mode ofthe power switch is in ON.If the lever is put in the “AUTO” position, therain sensor (A) will detect the extent of rain(or snow, other moisture, dust, etc.) and thewipers will operate automatically.Keep the lever in the “OFF” position if thewindscreen is dirty and the weather is dry.
Wiper operation under these conditions canscratch the windscreen and damage the wip-ers.
MIST- Misting function
The wipers will operate once.
OFF- OffAUTO- Auto-wiper control
Rain sensorThe wipers will automaticallyoperate depending on the degree ofwetness on the windscreen.
LO- SlowHI- FastRain sensor
CAUTIONzWith the operation mode in ON and lever inthe “AUTO” position, the wipers may auto-matically operate in the situations describedbelow.If your hands get trapped, you could sufferinjuries or the wipers could malfunction. Besure to put the operation mode in OFF, ormove lever to the “OFF” position to deacti-vate the rain sensor.•When cleaning the outside surface of thewindscreen, if you touch on top of the rainsensor.•When cleaning the outside surface of thewindscreen, if you wipe with a cloth on topof the rain sensor.•When using an automatic car wash.
•A physical shock is applied to the wind-screen.•A physical shock is applied to the rain sen-sor.NOTE
zTo p r o t e c t t h e r ub b e r p a r t s o f t h e w i pe r s , t h i soperation of the wipers
does not take place
when the vehicle is stationary and the ambi-ent temperature is about 0 °C or lower.zDo not cover the sensor by affixing a stickeror label to the windscreen. Also, do not putany water-repellent coating on the wind-screen. The rain sensor would not be able todetect the extent of rain, and the wipersmight stop working normally.zIn the following cases, the rain sensor maybe malfunctioning.For further informati
on, we recommend you
to consult a MITSUBISHI MOTORSAuthorised Service Point.•When the wipers operate
at a constant inter-
val despite changes in the extent of rain.•When the wipers do not operate eventhough it is raining.CAUTION
BK0203201EN.book 49 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Wiper and washer switch6-50 Instruments and controls
6
With the lever in the “AUTO” (rain sensor)position, it is possible to adjust the sensitivityof the rain sensor by turning the knob (B).
Move the lever in the direction of the arrowand release, to operate the wipers once.Use this function when you are driving inmist or drizzle.The wipers will operate once if the lever israised to the “MIST” position and releasedwhen the operation mode of the power switchis in ON or ACC. The wipers will continue tooperate while the lever is held in the “MIST”position.The wipers will operate once if the lever ismoved to the “AUTO” position and the knob(C) is turned in the “+” direction when theoperation mode is in ON.
zThe wipers may automatically operate whenthings such as insects
or foreign objects are
affixed to the windscreen on top of the rainsensor or when the windscreen is frozen.Objects affixed to the windscreen will stopthe wipers when the wipers cannot removethem. To operate the wipers again, move thelever in the “LO” or “HI” position.Also, the wipers may operate automaticallydue to strong direct s
unlight or electromag-
netic wave. To stop the wipers, place thelever in the “OFF” position.zContact a MITSUBISHI MOTORS Author-ised Service Point when replacing the wind-screen or reinforcing the glass around thesensor.
To a d j u s t t h e s e n s i t i v i t y o f t h e r a i n s e n s o r
NOTE
“+”- Higher sensitivity to rain“-”- Lower sensitivity to rain
NOTE
zIt is possible to activate the following func-tions:•Automatic operation (rain droplet sensitive)can be changed to intermittent operation(vehicle-speed sensitive).• Automatic operation (rain droplet sensitive)can be changed to intermittent operation(except vehicle-speed sensitive).For further informati
on, we recommend you
to consult a MITSUBISHI MOTORSAuthorised Service Point.On vehicles equipped
with Mitsubishi Multi-
Communication System (MMCS), screenoperations can be used to make the adjust-ment. Refer to the se
parate owner’s manual
for details.
Misting function
BK0203201EN.book 50 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

7
Starting and drivingEconomical driving ...........................................................................7-2Driving, alcohol and drugs ...............................................................7-2Floor mat *........................................................................................ 7-3Safe driving techniques..................................................................... 7-4Parking brake .................................................................................... 7-4Parking .............................................................................................. 7-5Steering wheel height and reach adjustment..................................... 7-6Inside rear-view mirror .....................................................................7-6Outside rear-view mirrors .................................................................7-7Power switch ...................................................................................7-10Starting and stopping the Plug-in Hybrid EV System .................... 7-12Selector Lever (Joystick Type) .......................................................7-14Select Position indicator .................................................................7-15Electrical Parking switch ................................................................7-16Regenerative braking level selector (paddle) * ..............................7-17S-AWC (Super All Wheel Control) ................................................7-184-wheel drive operation ..................................................................7-20Inspection and maintenance following rough road operation.........7-21Cautions on the handling of 4-wheel drive vehicles.......................7-22Battery save switch .........................................................................7-22Battery charge switch......................................................................7-23Acoustic Vehicle Alerting System (AVAS) ...................................7-24Braking ...........................................................................................7-26Hill start assist.................................................................................7-27Brake assist system .........................................................................7-28Emergency stop signal system * .....................................................7-29Anti-lock brake system (ABS)........................................................7-29Electric power steering system (EPS).............................................7-32
Active stability control (ASC) ........................................................ 7-32Cruise control * .............................................................................. 7-35Speed Limiter * .............................................................................. 7-39Adaptive Cruise Control System (ACC) * ..................................... 7-43Forward Collision Mitigation System (FCM) * ............................. 7-55Lane Departure Warning (LDW) *................................................. 7-60Reversing sensor system *.............................................................. 7-63Rear-view camera * ........................................................................ 7-67Cargo loads ..................................................................................... 7-70Towing caravans and trailers .......................................................... 7-71
BK0203201EN.book 1 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分