2014 MITSUBISHI OUTLANDER Rear Entertainment

27
Basic operations
Basic operations
To adjust display attributes
Press the DISP
button
Display attribute adjustment items (BRIGHT, CONTRAST, COLOR, TINT) are
displayed on the screen.
PICTURE CONTROL
BRIGHT
CONTRAST
TINT
G
R
COLOR
Move the JOYSTICK
up and down to select the item to be
adjusted, then move the JOYSTICK
left and right to make
the adjustment
BRIGHT
Moving right increases brightness.
Moving left decreases brightness.
CONTRAST
Moving right increases the contrast.
Moving left decreases the contrast.
COLOR
Moving right darkens the color.
Moving left lightens the color.
TINT
Moving right increases the green hue.
Moving left increases the red hue.
After making adjustments, wait a while and the display adjustment items will disappear.
NOTE
· Brightness can be adjusted for daytime (LIGHT OFF) and nighttime (LIGHT ON) respectively
To adjust display attributes and screen size
mc4384

28Basic operations
Basic operations
Move the
JOYSTICK
up and down to
select the desired screen size
Screen sizes FULL
Displays a screen enlarged horizontally to fi t the display.
NORMAL
Displays the screen at a ratio of 4:3 (width to height).
ZOOM
Displays the screen at a ratio of 16:9 (width to height).

After making adjustments, wait a while and the
display adjustment items will disappear.
NOTE
· If the video is viewed in an aspect ratio of 16:9,
set it to FULL.· If ZOOM is set, part of the top and bottom of the
menu on the screen may be cut off.
To adjust screen size
Press the
DISP
button
When display attribute adjustment items are
displayed, press the
DISP
button again
Screen size adjustment items (FULL, NORMAL,
ZOOM) are displayed.
DISPLAY
4*;&
FULL
NORMAL
ZOOM

29
Basic operations
Basic operations
To view video on the system (if so equipped)Video devices can be used by connecting them to the Auxiliary Video connector (RCA).
Press the
SOURCE
button and
change the system mode to VIDEO
NOTE
· If there are no video devices connected when
VIDEO mode is selected, no video will be
displayed
· Video devices can only be operated from the device(not by the video entertainment system
controls).
· Refer to the user manual that came with the video device for connecting or operating
instructions.
Front audio / MMCS (if so equipped)To listen to audio from a disc or video
playing from the system
.
Source audio selected by the system can be
listened to with Front Audio and MMCS. For
details, refer to the user manual for each
system.
NOTE
· Headphones can be used during audio playback from the system with Front Audio and
MMCS.
· If the system is OFF, video audio can be listened to with Front Audio and MMCS.

30Basic operations
Basic operations
Number input screen
Numbers are entered directly for the title/chapter and
password.
Clear
Cancel All Clear
Set
PLEASE INPUT THE TITLE NUMBER1234 5
6789 0
mc4424
Number: Select 0 - 9 Clear: Erase the last number entered. All Clear: Erase all numbers entered. Set: Set the numbers entered. Cancel: Close the number input screen.
Entry instructions
Enter numbers in order from the top
digit. Move the JOYSTICK
up, down,
left, and right, select the desired
number, and press ENT button.Clear
Cancel All Clear
Set
PLEASE INPUT THE TITLE NUMBER1234 5
6789 0
1
mc4425
Select the number for the next digit in
the same way, and press the
ENT

button.
Clear
Cancel All Clear
Set
PLEASE INPUT THE TITLE NUMBER1234 5
6789 0 12
mc4426
When all the numbers have been
entered, select "Set" with the
JOYSTICK
, and press the ENT

button.
Clear
Cancel All Clear
Set
PLEASE INPUT THE TITLE NUMBER1234 5
6789 0 1234
mc4427
The selected number is set.The disc is played from the start of the track
corresponding to the speci
fi ed title and chapter
numbers.
NOTE
· The number input screen will turn off
automatically after a while.· The disc can also be played by pressing the PLAY
button upon entering the title number
and chapter number.
Number input screen

DVD video/DVD-VR31
DVD video/DVD-VR

When the disc is stopped, press the
MENU
button
CAR ACTION MOVIEDRIVE & DRIVE
MB226 The title menu is displayed.
NOTE
· The menu may not be displayed, depending on the
DVD video/DVD-VR disc.
DVD video/DVD-VR operations
DVD video/DVD-VR operations
Insert a disc
When a disc is inserted in the system, the
screen automatically changes to the DVD
video/DVD-VR image and the disc begins
to play.
image07
If a disc is already inserted, press the SOURCE
button, select DISC, and press
the
PLAY
button.
NOTE
· When a DVD video/DVD-VR is inserted, the menu
is sometimes displayed. In this case, use the disc
menu to operate the DVD.
To display the title menu
During playback, press the
STOP

button to stop the video.
mc4385

DVD video/DVD-VR
32
DVD video/DVD-VR
To change the subtitle languageEach time the
SUB TITLE
button is
pressed, the next available subtitle
language can be displayed in turn.
NOTE
· The CURSOR menu can also be used to change the
screen angle, audio language, or subtitle language.→ “To change the angle, audio language, or subtitle language”
(P34)
To display the main menu
During video playback, press the MENU
button
CAR ACTION MOVIEDRIVE & DRIVE
NOTE
· The menu may not be displayed, depending on the
DVD video/DVD-VR disc.
· When the menu is displayed, use the disc menu to operate the DVD. Refer to the DVD video user
manual for DVD operation instructions.· Depending on the DVD, the same menu is sometimes displayed as both the title menu and the main menu. To change the screen angle, audio language, or subtitle languageRefer to the DVD video user manual
for information about angles, audio
languages, and subtitle languages.
NOTE
· Angles may be selected when there are two or more
angles recorded on the DVD.
In some cases, the angle may not be changed for certain scenes.
· Only the audio and subtitle languages recorded on
the DVD video/DVD-VR are available.
In some cases, depending on the DVD video/DVD- VR specifi cations, changes may not be made during
playback.· Refer to the DVD video/DVD-VR package for
information about available angles, audio languages,
and subtitle languages.
To change the angle

Each time the
ANGLE
button is pressed,
the next available camera angle can be
displayed in turn.
NOTE
· For scenes that have different angles available, the mark is displayed on screen. → “To set indications”
(P40)
To change the audio language
Each time the
AUDIO
button is pressed,
the next available audio language can be
displayed in turn.

DVD video/DVD-VR33
DVD video/DVD-VR
■
Audio menu Audio language number:
the number for the currently playing audio language
is displayed. Language:English is displayed as Eng (DVD-VIDEO only) →“Language codes” (P42,43) Audio recording format:the audio recording format is displayed.
: Dolby AC-3
MPEG : MPEG1,2
LPCM : Linear PCM
DTS : DTS
SDDS : SDDS
There will be no audio output even when selecting
DTS or SDDS.NOTE
· The title number, chapter number, angle number and
other displayed numbers are recorded on the DVD
video or
DVD-VR
. The numbers may vary depending
on the DVD video or
DVD-VR
.
· Dolby and the double-D symbol are registered
trademarks of Dolby Laboratories.
The CURSOR menu
The CURSOR menu
Display the system CURSOR menu to
confi rm DVD operations and playback
mode.
During DVD video or DVD-VR
playback, Press the CURSOR

button to display CURSOR menu
DVD video
mc4400
JpnSUBTITLE
ANGLE
TITLE CHAPTER
SOUND
ONLPCM
001
01
Jpn01
012 0:12:34
1
DVD-VR
mc4444
SUBTITLE
ANGLE
TITLE CHAPTER
SOUND
001- - 01
0012 0:12:34
1
ƒ
CURSOR menu display information■ Status display Title number:
the number for the currently playing title is
displayed. Chapter number:
the number for the currently playing chapter is
displayed. Playback time: the playback time is displayed. The audio mode is displayed. (DVD-VR only) The play mode (repeat and random modes) is
displayed. (DVD-VR only) Playback status:
the current playback status is displayed. Angle number:the number for the currently playing angle is
displayed.■
Subtitle menu Subtitle language number:
the number for the currently playing subtitle
language is displayed.
(DVD-VIDEO only)
Language:English is displayed as Eng (DVD-VIDEO only) →“Language codes” (P42,43) Display ON/OFF:Choose the ON setting to display subtitles and the
OFF setting to make them disappear.

DVD video/DVD-VR
34
DVD video/DVD-VR
NOTE
· The audio mode may not be switchable for some
DVD-VR discs.To change the play mode (DVD-VR only) While CURSOR menu is displayed,
move the JOYSTICK
left and right
to select play mode.
Move the JOYSTICK
up and down
to change play mode.
Play mode
ALL
: Play from the beginning of the disc : Repeat play within the title.
ƒ
: Repeat play within the chapter.
Press the RTN
button
NOTE
• After a while, the CURSOR menu will go away
automatically without pressing the RTN
button, and
the selections will be set.
To change the angle, audio language, or subtitle language
To change the angle
While CURSOR menu is displayed,
move the JOYSTICK
left and right
to select
the angle number
Move the JOYSTICK
up and down
to change the angle number
Press the RTN
button
NOTE
· For scenes that have different camera angles
available, the
mark is displayed on screen.
· It is possible to hide the
symbol.
→“To set indications” (P40)· It may take some time for the angle to change.
To change the audio language While CURSOR menu is displayed, move the JOYSTICK
left and right
to select the audio language number
Move the JOYSTICK
up and down
to change the audio language
number
Press the RTN
button
To change the subtitle language and turn subtitles ON or OFF(For DVD-VR, subtitles can only be turned ON or OFF.)
While CURSOR menu is displayed,
move the JOYSTICK
left and right
to select the subtitle language
number, or select Subtitles (ON/
OFF).

Move the JOYSTICK
up and down
to change the subtitle language or
turn it ON or OFF.
Press the RTN
button
After a while, the CURSOR menu will go away,
and the set subtitle language will be displayed.To change the audio mode (DVD-VR only) While CURSOR menu is displayed,
move the JOYSTICK
left and right
to select audio mode.
Move the JOYSTICK
up and down
to change audio mode.
Audio mode
: Stereo: L channel monaural : R channel monaural
Press the RTN
button
ALL




ƒ