2014 MITSUBISHI MIRAGE ECO mode

Comfort controls
5-37
5
To repeat tracksTo repeat a track
Press the RPT button to repeat the same track.
If the RPT button is pressed, the RPT indicator will come on.
To exit this mode, press the button again.
To repeat songs in the same folder (MP3 CDs only)
While a song is playing, press the RPT button for 2 seconds or
longer (until you hear a beep). The F-RPT indicator will come
on and the disc will repeat all the songs in the folder that con-
tains the song currently playing.
To exit this mode, press the button again.NOTE
With a disc that contains both CD-DA and MP3 files, the
repeat mode causes only files of the same format (CD-DA
only or MP3 files only) to be repeated.To change the order of tracks for playbackRandom playback for a disc (music CDs only)
If the RDM button is pressed, the RDM indicator will come on
and the tracks that are played will be selected at random.
To exit this mode, press the button again.
Random playback for a folder (MP3 CDs only)
If the RDM button is pressed, the F-RDM indicator will come
on and the tracks that are played will be selected at random
from the folder that is currently selected.
To exit this mode, press the button again.Random playback for all folders on a disc (MP3 CDs only)
Press the RDM button for 2 seconds or longer (until you hear a
beep). The RDM indicator will come on and the tracks that are
played will be selected at random from all folders on the disc
currently selected.
To exit this mode, press the button again.
NOTE
With a disc that contains both CD-DA and MP3 files, the
random mode causes only files of the same format (CD-
DA only or MP3 files only) to be played in a random
sequence.
BK0162600US.book 37 ページ ２０１３年３月２２日　金曜日　午後２時４１分

5-38 Comfort controls
5
CD text and MP3 title display
N00752100179
This CD player can display CD text and MP3 titles, including
ID3 tag information.
CD text
The CD player can display disc and track titles for discs with
converted disc and track title information. Press the DISP but-
ton repeatedly to make selections in the following sequence:
disc name → track name → normal display mode.NOTE
The display can show up to 11 characters. If a disc name
or track name has more than 11 characters, press the
PAGE button to view the next 11 characters.

When there is no title information to be displayed, the dis-
play shows “NO TITLE”.

Characters that the CD player cannot display are shown as
“•”.
MP3 titles
The CD player can display folder and file titles for discs with
converted folder and file information. Press the DISP button
repeatedly to make selections in the following sequence: folder
name → file name → normal display mode.ID3 tag information
The CD player can display ID3 tag information for files that
have been recorded with ID3 tag information.
1. Press the DISP button for 2 seconds or longer to switch to
the ID3 tag information.
2. Press the DISP button repeatedly to make selections in the
following sequence: album TAG → track TAG → artist
TA G → normal display mode.
NOTE
To return from ID3 tag information to the folder name,
press the DISP button again for 2 seconds or longer.

When there is no title information to be displayed, the dis-
play shows “NO TITLE”.

The display can show up to 11 characters. If a folder
name, track name, or item of ID3 tag information has
more than 11 characters, press the PAGE button to view
the next 11 characters.

Characters that the CD player cannot display are shown as
“•”.
BK0162600US.book 38 ページ ２０１３年３月２２日　金曜日　午後２時４１分

Comfort controls
5-39
5
To display the clock
N00702600010
Press the button to switch the clock mode. To exit the clock
mode, press the button.NOTE
While the clock mode is selected, the display will switch
to the applicable operation display whenever the CD
player, external audio input mode or radio, etc. is oper-
ated. Then, if no entries are made for 7 seconds, the dis-
play will automatically return to the clock mode.
To adjust the clock
N00702700011
1. Press and hold the button and the clock display flashes.
2. Press the or button to adjust the “hours” digit.
If you keep pressing the button, fast-forward begins.
3. When the “hours” digit is adjusted, press the button to
flash the “minutes” digit.
Press the or button to adjust the “minutes” digit.
If you keep pressing the button, fast-forward begins.
4. When the time is set, press the button to stop the clock
display from flashing.
A- (Clock) button
CD player mode Clock mode Example
A- (Clock) button
B- (Clock adjustment up) button
C- (Clock adjustment down) button
BK0162600US.book 39 ページ ２０１３年３月２２日　金曜日　午後２時４１分

Comfort controls
5-43
5
NOTE
The connected audio equipment cannot be adjusted using
the vehicle’s audio system.

Depending on the connected audio equipment, it may pro-
duce noise from the speakers.

Use the connected audio equipment’s own power source,
such as its battery.
Noise may be produced from the speakers if the connected
audio equipment is used while charging it using the acces-
sory socket of the vehicle.

Do not activate the external audio input mode when no
audio equipment is connected.
Otherwise, noise may be produced from the speakers.

Connect audio equipment when the external audio input
mode is deactivated or lower the vehicle’s speaker volume
before connecting it.
Noise may be produced from the speakers if audio equip-
ment is connected after the external audio input mode is
activated.

Compared to the CD player mode and radio mode, the
vehicle’s speaker volume will be lower in the external
audio input mode. Therefore, be careful when switching
from the external audio input mode to the CD player mode
or radio mode since the speaker volume will be higher.

Do not use excessive force on the connection cord. Other-
wise, the cord and connectors may be damaged.

If the connection cord alone is left connected to the auxil-
iary audio connector, noise may be produced from the
speakers.

For information on how to connect and operate the com-
mercially available audio equipment, refer to the owner’s
manual for the commercially available audio equipment.
To play tracks from USB device
(if so equipped)
N00762200056
You can connect your iPod or USB memory device to the USB
input terminal and play music files stored in the iPod or USB
memory device.
See the following section for the types of connectable devices
and supported files.
Refer to “Types of connectable devices and supported file
specifications” on page 3-158.
See the following sections for the connecting methods, “How
to connect an iPod” on page 3-156 and “How to connect a USB
memory device” on page 3-154.
If your vehicle is equipped with a Bluetooth
® 2.0 interface,
you can play music files in your iPod or USB memory device
via voice operation.
Refer to “To play iPod tracks via voice operation” on page 5-47
and “To play USB memory device tracks via voice operation”
on page 5-55.
NOTE
A file protected by copyright might not be able to play-
back.

It is recommended to adjust the equalizer of the connected
device to 0 db or neutral.
BK0162600US.book 43 ページ ２０１３年３月２２日　金曜日　午後２時４１分

Comfort controls
5-45
5
To fast-forward/reverse the track
N00762500033
To fast-forward/reverse the current track, press the button
or button.
Fast-forward
To fast-forward the current track, press the button. While
the button is kept pressed, the track will be fast-forwarded.
Fast-reverse
To fast-reverse the current track, press the button. While
the button is kept pressed, the track will be fast-reversed.To select a desired track
N00762600034
Tr a c k u p
Press the button repeatedly until the desired track number
appears on the display.
Tr a c k d o w n
Press the button repeatedly until the desired track number
appears on the display.NOTE
Pressing the button once during the song will cause
the audio system to restart playback from the beginning of
the song.
To find a track from the iPod menu
N00762700077
You can select desired tracks from the “Playlists”, “Artists”,
“Albums”, “Songs” or “Genre” (vehicles with Bluetooth
® 2.0
interface) menus on your iPod.
Operate the SEL switch to select desired tracks.
The selected menu or category or track is shown in the display.
When this mode is activated by pressing the SEL switch, the
SEL indicator will be displayed in the display.
NOTE
To cancel the selection, press the button to return to the
previous step.

If no operation is performed for 10 seconds or more or
other button is operated after the SEL switch has been
pressed, searching of the desired tracks is canceled.

If no operation is performed for 5 seconds or more after
the track is displayed, playback starts.

When the SEL indicator is not shown on the display and
the SEL switch is operated, the volume adjustment is acti-
vated.Press the SEL switch : To start this mode or to select the menu
or category or track.
Turn the SEL switch : To show the menu or category or track.
BK0162600US.book 45 ページ ２０１３年３月２２日　金曜日　午後２時４１分

5-46 Comfort controls
5
To play the same track repeatedly
N00762800023
Press the RPT button during playback to show “RPT” in the
display.
To exit this mode, press the button again.To play tracks in random order
N00762900024
Press the RDM button to show “RDM” in the display.
The iPod randomly selects tracks from the current category and
plays the selected tracks.
To exit this mode, press the button again.To play tracks in each album in random order
N00763000035
Press and hold the RDM button until you hear a beep to show
“F-RDM” in the display.
The iPod randomly selects tracks in the album from the current
category and play the selected tracks.
To exit this mode, press the button again.
To switch the display
N00763100049
You can display the track titles, artist names, genre and album
titles recorded in the iPod.
The display changes as follows every time the DISP button is
pressed during playback: Album title → Track name → Artist
name → Genre (vehicles with Bluetooth
® 2.0 interface) →
Normal display.
NOTE
Up to 11 characters are shown in the display at once. If the
title is cut off in the middle, press the PAGE button. The
next characters are displayed every time this button is
pressed.

If no title is stored, “NO TITLE” is shown in the display.

Characters that cannot be displayed are substituted by
“•”.
BK0162600US.book 46 ページ ２０１３年３月２２日　金曜日　午後２時４１分

5-48 Comfort controls
5
5. If there are two or more matches, the voice guide will say
“More than one match was found, would you like to play
?” If you say “Yes,” the system proceeds to
step 6.
If you say “No,” the next matching artist is uttered by the
system.NOTE
If you say “No” to three or all artist names uttered by the
system, the voice guide will say “Artist not found, please
try again” and the system returns to step 2.

Search time depends on the number of songs on your con-
nected device. Devices containing a large number of
songs may take longer to return search results.
6. After the voice guide says “Playing ,” the
system creates a playlist index for the artist.NOTE
If the confirmation function is active, the voice guide con-
firms if the artist name is correct. If the artist name is cor-
rect, say “Yes”. If not, say “No”. After the voice guide
says “Artist not found, please try again,” the system
returns to step 2.
7. The system exits the voice recognition mode and starts
playback.
To search by album title
N00763500030
1. Say “Play” on the main menu.NOTE
The Bluetooth
® 2.0 interface starts recognizing the con-
nected device.
If the connected device cannot be recognized or a connec-
tion error occurs, the Bluetooth
® 2.0 interface starts an
appropriate voice guide. Follow the voice guide.
2. After the voice guide says “Would you like to play by Art-
ist, Album, Playlist or Genre?,” say “Album”.
NOTE
If you say “Album