NOTElThe  sunshade  illumination  does  not  turn  on
if  the  sunshade  illumination  dimming  con-
trol switch is off.
l The  time  until  the  sunshade  illumination
goes off can be adjusted. If it is adjusted, thetime  until  the  room  &  map  lamps  go  off  is also adjusted automatically at the same time.
For  details,  consult  a  MITSUBISHI
MOTORS Authorized Service Point.Interior lamp *1
 auto-cutout
function
E00712901359
*1   Interior  lamps,  including  the  room  and
map lamps
l If  any  of  the  interior  lamps  are  left
switched on with the ignition switch is in
the  “LOCK”  position  or  the  operation
mode  is  in  OFF,  it  goes  off  automatical- ly after approximately 30 minutes.
l The  lamps  will  illuminate  again  after
they  automatically  go  off  if  the  ignition switch  or  the  engine  switch  is  operated, or  if  the  keyless  entry  system  or  keylessoperation system is operated.
NOTEl The  interior  lamp  auto  cut-out  function  can
be  deactivated.  The  time  until  the  lamps  au- tomatically  go  off  can  be  adjusted.  For  de-
tails  and  support,  consult  your  nearest MITSUBISHI  MOTORS   Authorized  Serv-
ice Point.Storage spaces
E00713101664CAUTIONlNever  leave  lighters,  cans  of  carbonated
drink, and spectacles in the cabin when park-ing  the  vehicle  in  hot  sunshine.  The  cabin will  become  extremely  hot,  so  lighters  and
other  flammable  items  may  catch  fire  and unopened drink cans (including soft drink or
beer  cans)  may  rupture.  Also,  spectacles with plastic lenses or materials could deform
or crack.
l Keep  the  lids  of  storage  spaces  closed  while
driving the vehicle. A lid or the contents of a
storage space could otherwise cause injuries.NOTEl When leaving your vehicle, do not leave val-
uables in the storage spaces.
1- Luggage floor boxes
2- Floor console box
3- Glove box
Glove box
E00726200200
To open, pull the lever (A).
Storage spaces
7-75
OGAE14E1For pleasant driving7       
         
        
        CAUTIONl[For 2WD vehicles equipped with the Active
Stability Control (ASC)]
If  the  vehicle  is  towed  with  the  ignition switch in the “ON” position or the operation
mode in ON and only the front wheels or on- ly  the  rear  wheels  raised  off  the  ground (Type B or C), the ASC may operate, result-
ing in an accident.
When  towing  the  vehicle  with  the  rear wheels raised, turn the ignition switch to the
“ACC” position or put the operation mode in ACC.
When  towing  the  vehicle  with  the  front wheels raised, keep the ignition switch or the
operation mode as follows.
[Except  for  vehicles  equipped  with  keyless operation system]
The  ignition  switch  is  in  the  “LOCK”  or
“ACC” position.
[Vehicles  equipped  with  keyless  operation system]
The operation mode is in OFF or ACC.
Towing with rear wheels off the
ground (Type B)
Place  the  gearshift  lever  in  the  “N”  (Neutral) position.
Turn  the  ignition  switch  to  the  “ACC”  posi-
tion  or  put  the  operation  mode  in  ACC  and secure  the  steering  wheel  in  a  straight-ahead
position  with  a  rope  or  tiedown  strap.  Never place  the  ignition  switch  in  the  “LOCK”  po-sition or put the operation mode in OFF when towing.
Towing with front wheels off the ground (Type C)
Release the parking brake.
Place  the  gearshift  lever  in  the  “N”  (Neutral) position  ( M/T)  or  the  selector  lever  in  the
“N” (NEUTRAL) position (CVT).
Emergency towing
If  towing  service  is  not  available  in  an  emer-
gency,  your  vehicle  may  be  temporarily  tow- ed by a rope secured to the towing hook.If  your  vehicle  is  to  be  towed  by  another  ve-
hicle  or  if  your  vehicle  tows  another  vehicle, pay careful attention to the following points:
If your vehicle is to be towed byanother vehicle
1. The  front  towing  hook  (A)  is  located  as
shown  in  the  illustration.  Secure  the  tow
rope to the front towing hook.
NOTEl Do  not  use  the  tie-down  hooks  (B)  for  tow-
ing.  These  hooks  are  provided  only  for  thepurpose of transporting the vehicle itself.
Using  any  part  other  than  the  designated
towing  hook  (A)  could  result  in  damage  to
the vehicle body.
l Using  a  wire  rope  or  metal  chain  can  result
in  damage  to  the  vehicle  body.  It  is  best  to
use  a  non-metallic  rope.  If  you  use  a  wire
rope or metal chain, wrap it with cloth at any point where it touches the vehicle body.
l Take  care  that  the  tow  rope  is  kept  as  hori-
zontal  as  possible.  An  angled  tow  rope  can damage the vehicle body.
2. Keep the engine running.
If  the  engine  is  not  running,  perform  the
following  operation  to  unlock  the  steer- ing wheel.
[Except  for  vehicles  with  keyless  opera-
tion system]
Towing
8-22 OGAE14E1For emergencies8