2014 MERCEDES-BENZ C-Class SEDAN Owner's Manual

Problems with the windshield wipers
Problem Possible causes/consequences and
0001 Solutions
The windshield wipers
are jammed. Leaves or snow, for example, may be obstructing the windshield
wiper movement.T
he wiper motor has been deactivated.
X For safety reasons, you should remove the SmartKey from the
ignition lock.
or
X Switch off the engine using the Start/Stop button and open the
driver's door.
X Remove the cause of the obstruction.
X Switch the windshield wipers back on. The windshield wipers
fail completely. The windshield wiper drive is malfunctioning.
X
Select another wiper speed on the combination switch.
X Have the windshield wipers checked at a qualified specialist
workshop. The windshield washer
fluid from the spray
nozzles no longer hits
the center of the
windshield. The spray nozzles are misaligned.
X
Have the spray nozzles adjusted at a qualified specialist
workshop. Windshield wipers
127Lights and windshield wipers Z

128

Useful information
............................130
Overview of climate control sys-
tems ................................................... 130
Operating the climate control sys-
tems ................................................... 135
Setting the air vents .........................142 129Climate control

Useful information
i This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differences are
possible. Please note that your vehicle may
not be equipped with all features
described. This also applies to safety-
related systems and functions.
i Read the information on qualified
specialist workshops: (Y page 25).Overview of climate control systems
Important safety notes
Observe the settings recommended on the
following pages. The windows could
otherwise fog up.
To preven tthe windows from fogging up:
R switch off climate control only briefly
R switch on air-recirculation mode only
briefly
R switch on the cooling with air
dehumidification function
R switch on the defrost windshield function
briefly, if required
Climate control regulates the temperature
and the humidity in the vehicle interior and
filters undesirable substances out of the air.
Climate control can only be operated when
the engine is running. Optimum operation is
only achieved with the side windows and roof
closed.
The residual heat function can only be
activated or deactivated with the ignition
switched off (Y page 141).
i Ventilate the vehicle for a brief period
during warm weather, e.g. using the
convenience opening feature (Y page 89).
This will speed up the cooling process and
the desired vehicle interior temperature
will be reached more quickly. i
The integrated filter filters out most
particles of dust and soot and completely
filters out pollen. It also reduces gaseous
pollutants and odors. Aclogged filter
reduces the amoun tofair supplied to the
vehicle interior .For this reason, you should
always observe the interval for replacing
the filter, which is specified in the
Maintenance Booklet .As it depends on
environmental conditions, e.g. heavy air
pollution, the interval may be shorter than
stated in the Maintenance Booklet.
i It is possible that the dehumidification
function of the climate control system may
be activated automatically an hour after the
SmartKey has been removed. The vehicle
is then ventilated for 30 minutes. 130
Overview of climate control systemsClimate control

Control panel for dual-zone automatic climate control
Canada only
0002
To set the temperature, left (Y page 138)
0003 To defros tthe windshield (Y page 139)
0022 To switch the ZONE function on/off (Y page 139)
0021 To switch cooling with air dehumidification on/off (Y page 135)
001F To switch the rear window defroster on/off (Y page 140)
0020 To set the temperature, right (Y page 138)
0012 To activate/deactivate air-recirculation mode (Y page 141)
0013 To set the air distribution (Y page 138)
0014 To increase the airflow (Y page 139)
0015 To reduce the airflow (Y page 139)
0016 To switch climate control on/off (Y page 135)
0018 To set climate control to automatic (Y page 137) Overview of climate control systems
131Climate control

USA only
0002
To set the temperature, left (Y page 138)
0003 To defrost the windshield (Y page 139)
0022 To switch maximum cooling on/off (Y page 140)
0021 To switch cooling with air dehumidification on/off (Y page 135)
001F To switch the rear window defroster on/off (Y page 140)
0020 To set the temperature, right (Y page 138)
0012 To activate/deactivate air-recirculation mode (Y page 141)
0013 To set the air distribution (Y page 138)
0014 To increase the airflow (Y page 139)
0015 To reduce the airflow (Y page 139)
0016 To switch climate control on/off (Y page 135)
0018 To set climate control to automatic (Y page 137)Notes on using climate control
Automatic climate control The following contains notes and
recommendations on optimum use of dual-
zone automatic climate control.
R
Activate climate control using the 0004and
0005 buttons. The indicator lamps in the
0004 and0005 buttons light up.
R Set the temperature to 72 ‡ (22 †).
R Only use the "windshield defrosting"
function briefly until the windshield is clear
again. R
Only use air-recirculation mode briefly, e.g.
if there are unpleasant outside odors or
when in a tunnel. The windows could
otherwise fog up, since no fresh air is drawn
into the vehicle in air-recirculation mode.
R Use the ZONE function to adopt the
temperature settings on the driver's side
for the front-passenger side as well.T he
indicator lamp in the 0003button goes out.
ECO start/stop function During automatic engine switch-off, the ECO
start/stop function only operates at a
reduced capacity. If you require the full132
Overview of climate control systemsClimate control

climate control output, you can switch off the
ECO start/stop function by pressing the ECO
button (Y page 152).
i The ECO start/stop function is not
available on AMG vehicles. Overview of climate control systems
133Climate control

Control panel for 3-zone automatic climate control
Canada only
Fron tcontrol panel
0002 To set the temperature, left (Y page 138)
0003 To defrost the windshield (Y page 139)
0022 To switch the residual heat function on/off (Y page 141)
0021 To switch cooling with air dehumidificatio non/off (Y page 135)
001F To switch the rea rwindow defroster on/off (Y page 140)
0020 To set the temperature, right (Y page 138)
0012 To switch the ZONE function on/off (Y page 139)
0013 To switch climate control on/off (Y page 135)
0014 To set the air distribution (Y page 138)
0015 To increase the airflow (Y page 139)
0016 To reduce the airflow (Y page 139)
0018 To adjust airflow (Y page 137)
0019 To activate/deactivate air-recirculation mode (Y page 141)
001A To set climate control to automatic (Y page 137)
Rear control panel
001B To increase the airflow (Y page 139)
001D To reduce the airflow (Y page 139)
001E Display
0023 To reduce the temperature (Y page 138)
0024 To increase the temperature (Y page 138)134
Overview of climate control systemsClimate control