2014 LEXUS RX270 Owners Manual

409
3-2. Using the audio system
3
Interior features
RX350/270_EE
Displaying the Bluetooth® device address and name
Select “Device Name” using .
Turn to display the Bluetooth
® device address and name.
Select “Go Back” using to return to “System Setup”.
Initializing the system
Select “Initialize” and then “Confirm” using .
Select “Confirm” again using .
STEP1
STEP2
STEP3
STEP1
STEP2
RX350_270_EE_48D77E.book 409 ページ ２０１４年１月２４日　金曜日　午前１０時４分

410
3-2. Using the audio system
RX350/270_EE
■Initialization
●The following data in the system can be initialized:
• Phone book
• Outgoing and incoming call history
• Speed dials
• Registered mobile phone data
•Security code
• Registered Bluetooth
® enabled portable player data
• Passkeys for the mobile phones
• Passkey for the Bluetooth
® audio players
•Guidance volume
• Receiver volume
• Ring tone volume
●Once the initialization has been completed, the data cannot be restored to its
original state.
■When the phone book is locked
The following functions cannot be used:
●Dialing by inputting a name
●Speed dialing
●Dialing a number stored in the call history memory
●Using the phone book
RX350_270_EE_48D77E.book 410 ページ ２０１４年１月２４日　金曜日　午前１０時４分

411
3-2. Using the audio system
3
Interior features
RX350/270_EE
Using the phone book
Adding a new phone number
The following methods can be used to add a new phone number:
●Transferring data from the mobile phone
●Inputting a phone number using
●Selecting a phone number from the outgoing or incoming call history
To enter the menu of each setting, follow the steps below.
Press the off-hook switch and select “Phonebook” using
.
Select one of the following items using :
●Adding a new phone number
“Add Entry”
●Changing the registered name in the phone book
“Change Name”
●Listing the registered data
“List Names”
●Setting speed dials
“Speed Dial”
●Deleting the registered data
“Delete Entry”
●Deleting speed dials
“Del Spd Dial”
STEP1
STEP2
RX350_270_EE_48D77E.book 411 ページ ２０１４年１月２４日　金曜日　午前１０時４分

412
3-2. Using the audio system
RX350/270_EE■Adding procedure
Select “Add Entry” using .
Use one of the following methods to input a telephone number:
Transferring data from the mobile phone:
STEP2-1 Select “By Phone” and then “Confirm” using .
STEP2-2 When “Transfer” appears in the display, transfer the
data from the mobile phone.
Refer to the manual that comes with the mobile phone for
details on transferring data.
STEP2-3 Select the desired data using .
Inputting a phone number using :
STEP2-1 Select “Manual Input” using .
STEP2-2 Input a phone number using , and press
again.
Input the phone number 1 digit at a time.
STEP1
STEP2
RX350_270_EE_48D77E.book 412 ページ ２０１４年１月２４日　金曜日　午前１０時４分

413
3-2. Using the audio system
3
Interior features
RX350/270_EESelecting a phone number from the outgoing or incoming call history:
STEP2-1 Select “Call History” using .
STEP2-2 Select “Outgoing” or “Incoming” using .
STEP2-3 Select the desired data using .
Select “Record Name” using , and say the desired name
after the beep.
The name to be registered will be repeated aloud.
Select “Confirm” using .
Select “Confirm” again using .
In , selecting “Speed Dial” instead of “Confirm” registers the
newly added phone number as a speed dial.
STEP3
STEP4
STEP5
STEP5
RX350_270_EE_48D77E.book 413 ページ ２０１４年１月２４日　金曜日　午前１０時４分

414
3-2. Using the audio system
RX350/270_EE
Changing the registered name in the phone book
Select “Change Name” using .
Select the desired name to be changed using .
Select “Record Name” using and say the new name after
the beep.
The name to be registered will be repeated aloud.
Select “Confirm” using .
Listing the registered data
Select “List Names” using . The list of the registered data will be
read aloud.
When listing is complete, the system returns to “Phonebook”.
Pressing the off-hook switch while an entry is being read aloud selects the
entry and calls the registered phone number.
STEP1
STEP2
STEP3
STEP4
RX350_270_EE_48D77E.book 414 ページ ２０１４年１月２４日　金曜日　午前１０時４分

415
3-2. Using the audio system
3
Interior features
RX350/270_EE
Setting speed dials
Select “Speed Dial” using .
Select the desired data using .
Select the desired preset button and register the data into speed
dial by either of the following methods:
a. Press the desired preset button and select “Confirm” using
.
b. Press and hold the desired preset button.
Deleting the registered data
Select “Delete Entry” using .
Select the desired data to be deleted using .
STEP1
STEP2
STEP3
STEP1
STEP2
RX350_270_EE_48D77E.book 415 ページ ２０１４年１月２４日　金曜日　午前１０時４分

416
3-2. Using the audio system
RX350/270_EE
Deleting speed dials
Select “Del Spd Dial” using .
Press the preset button to which the desired speed dial is regis-
tered after the beep.
The name to be deleted will be heard.
Select “Confirm” using .
■Limitation of number of digits
A phone number that exceeds 24 digits cannot be registered.
STEP1
STEP2
STEP3
RX350_270_EE_48D77E.book 416 ページ ２０１４年１月２４日　金曜日　午前１０時４分