2014 INFINITI Q70 Quick Reference Guide

23

HomeLink® Universal Transceiver (if so equipped)
The h omeLink system can learn and consolidate the functions of up to 3 differ\
ent
hand-held transmitters, operating items such as garage doors, property g\
ates, outdoor and
indoor lights or alarm systems.
To program the h omeLink® Universal Transceiver:
•

Position


the

handheld

transceiver 1-3 in (26-76 mm) away from the HomeLink surface,
keeping the
h
omeLink indicator light in view.
•

Press


and

hold

the

desired HomeLink button and the handheld transmitter button
simultaneously until the
h omeLink indicator light flashes slowly and then rapidly.
•

Both


buttons

may

be

released when the indicator light flashes rapidly.
To verify the programming is complete, press and hold the h omeLink button and observe
the indicator light:
•

A
solid continuous light indicates the programming is complete, and the HomeLink button

will activate your device.


•
A
blinking light that turns to a solid continuous light after 2 seconds indicates additional
steps are required to complete the programming.
An additional person may make the remaining steps easier. To complete th\
e
programming process:
•

At
the receiver of the device that you are programming to the HomeLink button, press

and release the learn or smart button (the name may vary by manufacture\
r, but it is


usually located near where the hanging antenna wire is attached to the u\
nit). You have
approximately 30 seconds to initiate the following step.
•

Press
and hold the programed HomeLink button for 2 seconds and release.
You may have to repeat the previous 2 steps up to 3 times to complete th\
e programing
process.
h omeLink should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the homeLink website at
www.homelink.com or call
1-800-355-3515.
HOMELINK
1276460_14a_Infiniti_Q70_QRG_102813.indd 2310/28/13 2:32 PM

memo
1276460_14a_Infiniti_Q70_QRG_102813.indd 2410/28/13 2:32 PM

memo
1276460_14a_Infiniti_Q70_QRG_102813.indd 2510/28/13 2:32 PM

To view detailed instructional videos,
go to www.infinitiownersinfo.mobi/2014/q70
or snap this barcode with an appropriate
barcode reader.
Printing: November 2013 (04) / QR
14E 0Y51U0 / Printed in USA
This Quick Reference Guide is intended to provide an overview of some of\
the unique features of
your new vehicle. Please see your Owner’s Manual for important safety\
information and system
operation limitations. Features and equipment in your vehicle may vary d\
epending on model, trim
level, options selected, order, date of production, region or availabili\
ty. Therefore, you may find
information about features or equipment that are not included or install\
ed on your vehicle.
All information, specifications and illustrations in this Quick Referenc\
e Guide are those in
effect at the time of printing. NISSAN reserves the right to change spec\
ifications, performance,
design or component suppliers without notice and without obligation. Fro\
m time to time, NISSAN
may update or revise this Quick Reference Guide to provide Owners with t\
he most accurate
information currently available. Please carefully read and retain with t\
his Quick Reference Guide
all revision updates sent to you by Nissan to ensure you have access to \
accurate and up-to-date
information regarding your vehicle. Current versions of vehicle Quick Re\
ference Guide, Owner’s
Manuals and any updates can also be found in the Owner section of the In\
finiti website at
https://owners.infinitiusa.com/iowners/navigation/manualsAndGuides. If y\
ou have questions
concerning any information in your Owner’s Manual, contact INFINITI C\
onsumer Affairs. See the
INFINITI CUSTOMER CARE PROGRAM page in this Owner’s Manual for contac\
t information.
1276460_14a_Infiniti_Q70_QRG_102813.indd 210/28/13 2:30 PM