2014 INFINITI Q70 change wheel

6
essential information
Accessing the Front Cup Holders
To open the cup holders, push the lid
01 down and release.
For more information, refer to the “Instruments and

controls (section 2)” of your Owner’s Manual.
01
Infiniti Drive Mode Selector
Turn the switch to the following position to select the
corresponding drive mode:
01 Standard (•) -Used for standard or normal driving.
02 SPOR
t - The engine and transmission will adjust,

resulting in higher engine rpm and a more aggressive
shift pattern. In this mode, fuel economy may be reduced.
03 SNOW
– Used on snowy roads or slippery areas. In this mode, engine output\
is controlled to

avoid wheel spin.
04 ECO – Adjusts engine and transmission points to enhance fuel economy.
ECO PE d AL SYSTEM (if so equipped)
w ith the Infiniti d rive Mode Selector switch
in the ECO Mode, the ECO pedal system assists
the driver in improving fuel economy.
The ECO pedal system applies force to make the accelerator pedal heavier\
, depending on the
accelerator pedal operation.
To change the ECO pedal reaction force:



1. Push the
SE tt ING button on the control panel.



2. Touch the
ECO DRIVE key.



3. Touch the
ECO pedal key and select one of the options below:
•

OFF
- Turns the ECO pedal system off.
•

Soft
- Softens the reaction force.
•

Standard
- Reaction force is normal.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
0102
03
04
07 3.
h
ighlight the corresponding warning system key

07 , select ON (enabled) or OFF (disabled) and
press the EN t ER button
06 .
For more information, refer to the “Starting and driving (section 5)” of your
Owner’s Manual.
1276460_14a_Infiniti_Q70_QRG_102813.indd 610/28/13 2:30 PM

18
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
Reduce background noise as much as possible by closing windows and pointing hv AC vents
away from the ceiling.
Speak naturally without long pauses and without raising your voice.


w hen speaking phonebook names, please be aware some phones require the la\
st name to be
spoken before the first name. For example, “Michael Smith” may be \
spoken as “Smith Michael”.
To cancel a v oice Recognition session, say “Cancel” or “Quit” or press an\
d hold the
or

button for 5 seconds.
To go back to the previous command, say “Go back” or “Correctio\
n”.
If the v oice Recognition system does not recognize your voice commands, train th\
e system
using the Speaker Adaptation Mode. See your Owner’s Manual for detail\
ed information.
For more detailed information and instructions, refer to your cellular p\
hone’s Owner’s Manual and
visit www.InfinitiUSA.com/bluetooth.
Bluetooth® System with Navigation*
(if so equipped)
CONNECTING PROCEdURE
The vehicle must be stationary when connecting
the phone.


1.
Press the PhONE button on the instrument panel or
the
button on the steering wheel and select the

“Connect Phone” key.
2.


Initiate connecting from the phone.
•
The connecting procedure varies according to each
cellular phone model. For detailed connecting
instructions and a list of compatible phones,
please visit www.InfinitiUSA.com/bluetooth.
•

when prompted for a PIN code, enter “1234”
from the handset. (The PIN code is assigned
by INFINITI and cannot be changed.)


3.

when connecting is complete, the screen will
return to the Phone menu display.
system guide
1276460_14a_Infiniti_Q70_QRG_102813.indd 1810/28/13 2:31 PM

20
Bluetooth® System without Navigation* (if so equipped)
PAIRING PROCEdURE
1.

Press the button on the steering wheel. The

system announces the available commands.
2.


Say: “Connect Phone”. The system acknowledges

the command and announces the next set of
available commands.
3.


Say: “Add Phone”. The system acknowledges the

command and asks you to initiate connecting from
the phone handset.
4.


Initiate pairing from the phone.


•

The


connecting procedure varies according to each cellular phone model.
For detailed connecting instructions and a list of compatible phones,
please visit www.InfinitiUSA.com/bluetooth.
•


When


prompted for a PIN code, enter “1234” from the handset.
(The PIN code is assigned by INFINITI and cannot be changed.)
5.


Say a name for the phone when the system asks you to provide one. You ca\
n give the phone a

name of your choice.
P
h
ONEBOO
k
REGISTRATION

w hen the cellular phone is connected to the in-vehicle module, the data s\
tored in the cellular
phone, such as phonebook, outgoing call logs, incoming call logs and mis\
sed call logs, is
automatically transferred and registered to the system.
The availability of this function depends on each cellular phone. The co\
pying procedure also
varies according to each cellular phone. See your cellular phone’s Ow\
ner’s Manual for
more information.
Up to 1,000 phone numbers per registered cellular phone can be stored in\
the phonebook.
MA
k ING A CALL
1.


Push the button on the steering wheel. A tone will sound.
2.


Say: “Call”. The system acknowledges the command and announces the\
next set of

available commands.
3.


Say the registered person’s name. The system acknowledges the command\
and announces

the next set of available commands.
4.


Say: “Yes”. The system acknowledges the command and makes the call\
.
RECEI

v
ING/EN
d
ING A CALL
To accept the call, press the
button on the steering wheel.

To reject the call, press the button.
To hang-up, press the button.
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (secti\
on 4)” of your Owner’s Manual
or visit www.InfinitiUSA.com/bluetooth.
system guide
1276460_14a_Infiniti_Q70_QRG_102813.indd 2010/28/13 2:31 PM