2014 INFINITI Q70 Quick Reference Guide

15
Conventional (Fixed Speed) Cruise Control
The cruise control system enables you to set a
constant cruising speed once the vehicle has reached
25 MP
h (40 km/h).
The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.
To activate the cruise control, push the ON/OFF
switch
01 . The
CRUISE
indicator light in the

instrument panel will illuminate.
To set cruising speed, accelerate the vehicle to the desired speed, push\
the COAS t /SE t
switch
02 and release. The
CRUISE SE
t indicator light
in the instrument panel will

illuminate. Take your foot off the accelerator pedal. Your vehicle will \
maintain the set speed.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch
03 . when the
vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAS t /SE t switch
02. Release the
switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch
04 .
To turn off cruise control, push the ON/OFF switch
01 . Both the CRUISE indicator light and
the SE
t
indicator light in the instrument panel will extinguish.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
01
03
02
04
USB/iPod® Interface
The USB jack 01 is located in the center console under

the arm rest.
w hen a compatible USB memory device or iPod® is

plugged into the USB jack, compatible audio and
video files stored on the device can be played
through the vehicle’s audio system and
front display.
For more information, refer to the “Monitor, climate, audio, phone
and voice recognition systems (section 4)” of your Owner’s Manual.
01
1276460_14a_Infiniti_Q70_QRG_102813.indd 1510/28/13 2:31 PM

16
first drive features
Intelligent Cruise Control (ICC) System (if so equipped)
vEhICLE-TO-vEhICLE dISTANCE CONTROL MOdE
To set v ehicle-To- v ehicle d istance Control mode,



press the
CRUISE ON/OFF button
01 for less than
1.5 seconds. The
CRUISE indicator light
02
will illuminate.
Accelerate to the desired speed.
Push down on the COAS t /SE t switch
03 and release
it. Cruise control will be set to the desired speed.
Press the distance button 04 repeatedly to change

the set distance between long, middle and short.
w hen a vehicle is not detected ahead of you in the



lane, the set distance, and set vehicle speed indicator




lights will illuminate 05 in set mode.

w hen a vehicle is detected ahead of you in the lane, the vehicle ahead
detection, set distance and set vehicle speed indicator lights will
illuminate
06 in set mode.
To reset at a faster cruising speed, push and hold the
ACCEL/RES switch
07 . when the vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the
COAS t /SE t switch
03 . Release



the switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch
08 or tap the brake pedal. The set
vehicle speed indicator 05 will extinguish.
To turn off cruise control, press the
CRUISE ON/OFF button
01 . The CRUISE indicator light

02 in the instrument panel will extinguish.
To set conventional (fixed speed) cruise control mode:
w hile cruise control is off, press the CRUISE ON/OFF
button
01 and hold it down for more
than 1.5 seconds. The CRUISE
indicator light will illuminate.
Accelerate to the desired speed.
Push down on the
COAS t /SE t switch and release it. The SE t indicator light will illuminate.



Cruise control should be set to the desired speed.
To switch between the two cruise control modes:
w hen one of the two cruise modes is in use, you must turn the system off \
and then turn it on



again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
0205
06
0807
03
01
04
1276460_14a_Infiniti_Q70_QRG_102813.indd 1610/28/13 2:31 PM

17
Trip Computer

whe n the
button
01 is pressed, the following

modes will appear on the vehicle information
display
02 :
•

MPG

–
d
isplays the current fuel consumption.
•

MPG/MP

h – d isplays the average fuel
consumption and speed since the last reset.



·


To reset, press and hold the button 03 for
more than one second. Both the fuel consumption
and average speed will reset at the same time.
•
t
IME/MILES –
d
isplays the elapsed time and total
distance the vehicle has been driven since the last reset.



·


w
hen the elapsed time and trip odometer are displayed, To reset, press an\
d hold the

button 03 for more than one second. Both the elapsed time and trip odometer will \
reset at
the same time.
•

RANGE

–
d
isplays the estimated distance to empty (dte) the vehicle can be drive\
n
before refueling.
•

OU

t
SIDE
t
EMP – d isplays the exterior air temperature including a low temperature
warning feature.
•

SE

tt
ING – Allows you to set reminders for alerts and maintenance intervals o\
r change the
language and units used in the system.



· Press the
button
03 to cycle through the various setting modes.

· Press the
button
01 to choose the selected menu.
•

WARNING

–
d
isplays when a warning is present.
To reset t RIP A and t RIP B, press and hold the t RIP RESE t button 04 for more than
one second.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
Bluetooth® Hands-free Phone System
A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
SYSTEM OPERATING TIPS
Press the or button to interrupt the voice

prompts at any time and speak a command after
the tone.
To use the system faster, you may speak the second
level commands with the main menu command on
the main menu. For example, Press the
or
button and after the tone say, “Call Redial”.
The “ h elp” command can be used to hear a list of
available commands at any time.
03
01
02
Bluetooth®
Controls
Microphone
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
system guide
04
1276460_14a_Infiniti_Q70_QRG_102813.indd 1710/28/13 2:31 PM

18
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
Reduce background noise as much as possible by closing windows and pointing hv AC vents
away from the ceiling.
Speak naturally without long pauses and without raising your voice.


w hen speaking phonebook names, please be aware some phones require the la\
st name to be
spoken before the first name. For example, “Michael Smith” may be \
spoken as “Smith Michael”.
To cancel a v oice Recognition session, say “Cancel” or “Quit” or press an\
d hold the
or

button for 5 seconds.
To go back to the previous command, say “Go back” or “Correctio\
n”.
If the v oice Recognition system does not recognize your voice commands, train th\
e system
using the Speaker Adaptation Mode. See your Owner’s Manual for detail\
ed information.
For more detailed information and instructions, refer to your cellular p\
hone’s Owner’s Manual and
visit www.InfinitiUSA.com/bluetooth.
Bluetooth® System with Navigation*
(if so equipped)
CONNECTING PROCEdURE
The vehicle must be stationary when connecting
the phone.


1.
Press the PhONE button on the instrument panel or
the
button on the steering wheel and select the

“Connect Phone” key.
2.


Initiate connecting from the phone.
•
The connecting procedure varies according to each
cellular phone model. For detailed connecting
instructions and a list of compatible phones,
please visit www.InfinitiUSA.com/bluetooth.
•

when prompted for a PIN code, enter “1234”
from the handset. (The PIN code is assigned
by INFINITI and cannot be changed.)


3.

when connecting is complete, the screen will
return to the Phone menu display.
system guide
1276460_14a_Infiniti_Q70_QRG_102813.indd 1810/28/13 2:31 PM

19
P
h
ONEBOO
k
SETUP


d epending on your cellular phone, the system may
automatically download your cellular phone’s
entire phonebook to the vehicle’s Bluetooth
™ system.
If the phonebook does not download automatically,
the vehicle phonebook may be set for up to 40 entries.
To manually download entries:
1.


Press the
button and select the “Quick d ial” key.
2.


Select the “Add New” key at the top of the display.


There are different methods to input a phone
number. Select one of the following options:
•

“Copy from Call

h istory”- to save a number from
the Outgoing, Incoming or Missed Calls lists.
•

“Copy


from the Phonebook”- to save a number
that has been downloaded from your handset to
the vehicle.
•



“Enter


Number by Keypad”- to input the number
and name manually.
MA
k
ING A CALL
To make a call, follow this procedure:
1.


Press the
button on the steering wheel. The Phone

menu will appear on the control panel display.
2.


Select the “Quick
d ial”, “Call
hi
story”, “Phonebook”
or “
d
ial Number” key.
3.


Select the desired entry from the list.

4.


Select “Call” to start dialing the number.

RECEI
v
ING/EN
d ING A CALL
To accept the call, press the button on the steering

wheel or touch the “Answer” key.
To reject the call,touch the “Reject Call” key.
To hang-up, press the button or touch the

“
h
ang Up” key.
1276460_14a_Infiniti_Q70_QRG_102813.indd 1910/28/13 2:31 PM

20
Bluetooth® System without Navigation* (if so equipped)
PAIRING PROCEdURE
1.

Press the button on the steering wheel. The

system announces the available commands.
2.


Say: “Connect Phone”. The system acknowledges

the command and announces the next set of
available commands.
3.


Say: “Add Phone”. The system acknowledges the

command and asks you to initiate connecting from
the phone handset.
4.


Initiate pairing from the phone.


•

The


connecting procedure varies according to each cellular phone model.
For detailed connecting instructions and a list of compatible phones,
please visit www.InfinitiUSA.com/bluetooth.
•


When


prompted for a PIN code, enter “1234” from the handset.
(The PIN code is assigned by INFINITI and cannot be changed.)
5.


Say a name for the phone when the system asks you to provide one. You ca\
n give the phone a

name of your choice.
P
h
ONEBOO
k
REGISTRATION

w hen the cellular phone is connected to the in-vehicle module, the data s\
tored in the cellular
phone, such as phonebook, outgoing call logs, incoming call logs and mis\
sed call logs, is
automatically transferred and registered to the system.
The availability of this function depends on each cellular phone. The co\
pying procedure also
varies according to each cellular phone. See your cellular phone’s Ow\
ner’s Manual for
more information.
Up to 1,000 phone numbers per registered cellular phone can be stored in\
the phonebook.
MA
k ING A CALL
1.


Push the button on the steering wheel. A tone will sound.
2.


Say: “Call”. The system acknowledges the command and announces the\
next set of

available commands.
3.


Say the registered person’s name. The system acknowledges the command\
and announces

the next set of available commands.
4.


Say: “Yes”. The system acknowledges the command and makes the call\
.
RECEI

v
ING/EN
d
ING A CALL
To accept the call, press the
button on the steering wheel.

To reject the call, press the button.
To hang-up, press the button.
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (secti\
on 4)” of your Owner’s Manual
or visit www.InfinitiUSA.com/bluetooth.
system guide
1276460_14a_Infiniti_Q70_QRG_102813.indd 2010/28/13 2:31 PM

21
Navigation System (if so equipped)
01 Touch screen display.
02 d estination
(DES t ) – Press to enter a destination.
03 Information
(INFO) – Press to display the vehicle, traffic (if so equipped), weather
(if so equipped) or voice recognition information.
04 SE tt ING – Press to access the system settings.
05 Infiniti Controller


• EN t ER – Press the EN t ER button to select the highlighted item on the screen.
•

Center
Dial – Turn the dial to highlight an item on the screen, adjust a setting or adjust the

map scale.


•
Slide
the controller (push upward/downward/leftward/rightward) to select an item on the

screen, to adjust a setting or scroll the map in eight directions.
06 ROU t E – Press to access guidance control functions, such as guidance cance\
llation, route

priority or waypoint setting on the route.
07 MAP – Press to display the map. w hile following a programmed route, press multiple times
to change the type of route information.
0203
05
04
0908
1110
0706
01
1276460_14a_Infiniti_Q70_QRG_102813.indd 2110/28/13 2:31 PM

22
08 S t A t US – Press multiple times to display audio information, air conditioner\
status, fuel

economy or navigation directions.
09 – Press to switch between the day screen (bright) and the night sc\
reen (dark). Press and

hold the button to turn the display off. Press again to turn the display\
on.
10
BAC k – Press to return to the previous screen. In a settings screen, this\
button can also
be used to apply the setting. In a character input screen, this button can \
also delete the char-
acters that have been entered.
11 VOICE – Press to hear the current voice guidance for a programmed route.
For more information, please refer to your Navigation System Owner’s \
Manual.
DVD Player (if so equipped)
This system allows you to play video
files via a dvd



or C
d from the front display.
To view movies on the front display, stop the vehicle
in a safe location, move the shift lever to the P (PAR
k )
position and apply the parking brake.
To reduce driver distraction, movies will not be shown



on the front display while the vehicle is in any




drive position.
For more information, refer to the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
system guide
1276460_14a_Infiniti_Q70_QRG_102813.indd 2210/28/13 2:31 PM