2014 INFINITI Q60 CONVERTIBLE Quick Reference Guide

15
Bluetooth® Hands-free Phone System
A cellular telephone should not be used
while driving so full attention may be given to
vehicle operation.*
SySTEM OPERATING TIPS The “Help” command can be used to hear a list of
available commands at any time.
Reduce background noise as much as possible by
closing windows and pointing HVAC vents away
from the ceiling.
Say commands after the tone, or press the
button or the
to say a command at any time.
Speak naturally without long pauses and without
raising your voice.
Trip Computer
When the
button
01 is pressed, the following modes

will appear on the vehicle information display 02 :
•


MPG

– Displays the current fuel consumption.
•


MPG/MP

h
– Displays the average fuel consumption
and speed since the last reset.
•

t
IME/MILES – Displays the elapsed time and total
distance the vehicle has been driven since the
last reset.
•

r
ANGE – Displays the estimated distance to empty
(dte) the vehicle can be driven before refueling.


•


OU

t
SIDE
t
EMP – Displays the exterior air temperature
including a low temperature warning feature.
•


SE

tt
ING – Allows you to set reminders for alerts
and maintenance intervals or change the language and units used in the s\
ystem.



—


Press the button
03 to cycle through the various setting modes.



—


Press the button
01 to choose the selected mode.
•


WA

r
NING – This is availabe when a warning is present.
Press the
button 03
for approximately 1 second to reset the currently displayed
trip odometer to zero.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
01
03
02
Bluetooth® Controls
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g. Microphone
system guide
1276473_14a_Q60_Convertible_QRG_062113.indd 156/21/13 3:32 PM

16
system guide
When speaking Phonebook names, please be aware some phones require the l\
ast name
to be spoken before the first name. For example, “Michael Smith” m\
ay be spoken as
“Smith Michael”.
To cancel a voice recognition session, simply wait 5 seconds, say “C\
ancel” or “Quit”, or
press and hold the
button for 5 seconds.
To increase or decrease the volume of the voice prompts, push the volume\
control switches
or on the steering wheel or turn the VOL/ON•OFF control knob on the audio system
while the system is responding.
If the Voice Recognition system does not recognize your voice commands, \
train the system
using the Speaker Adaptation Mode. See your Owner’s Manual for detail\
ed information.
For more detailed information and instructions, refer to your cellular p\
hone Owner’s Manual
and visit www.InfinitiUSA.com/Bluetooth.
Bluetooth® System with Navigation (if so equipped)
CONNECTING PROCEDURE
The vehicle must be stationary when connecting
the phone.


1.
Press the

P h ONE button on the instrument panel or
the
button on the steering wheel and select the

“Connect Phone” key.
2.


Initiate connecting from the phone.
•


The connecting procedure varies according to each
cellular phone model. For detailed connecting
instructions and a list of compatible phones,
please visit

www.InfinitiUSA.com/bluetooth.
•


When prompted for a PIN code, enter “1234”
from the handset. (The PIN code is assigned
by INFINITI and cannot be changed).


3.

When the connecting is complete, the screen will
return to the Phone menu display.
1276473_14a_Q60_Convertible_QRG_062113.indd 166/21/13 3:32 PM

17
PHONEBOOK SETUP


Depending on your cell phone, the system may automatically download your\
cell phone’s
e
ntire phonebook to the vehicle’s Bluetooth system.
If the phonebook does not download automatically, the vehicle phonebook \
may be set for up
to 40 entries.
To manually download entries:
1.


Press the
button and select the “Quick Dial” key.
2.


Select the “Add New” key at the top of the display.


There are different methods to input a phone
number. Select one of the following options:



•

“Copy from Call History” to save a number from


the Outgoing, Incoming or Missed Calls lists.



•


“Copy from the Phonebook” to save a number
t

hat has been downloaded from your handset to
the vehicle.



•


“Enter Number by Keypad” to input the number
and name manually.
MAKING A CALL
To make a call, follow this procedure:


1.

Press the
button on the steering wheel. The “Phone”

menu will appear on the control panel display.


2.

Select the “Quick Dial”

, “Call History”, “Phonebook”
or “Dial Number” key.
3.


Select the desired entry from the list.

4.


Select “Call” to start dialing the number.

RECEIVING/ENDING A CALL
To accept the call, press the button on the steering

wheel or touch the “Answer” key. To reject the call,
touch the “Reject Call” key.
To hang-up, press the button or touch the

“Hang Up” key.
1276473_14a_Q60_Convertible_QRG_062113.indd 176/21/13 3:32 PM

18
system guide
Bluetooth® System without Navigation (if so equipped)
PAIRING PROCEDURE

1.
Press the
button on the steering wheel. The
system announces the available commands.
2.


Say “Connect Phone”. The system acknowledges

the command and announces the next set of
available commands.
3.


Say “Add Phone”. The system acknowledges the

command and asks you to initiate connecting from
the phone handset.


4.

Initiate pairing from the phone.



•


The connecting procedure varies according to each cellular phone model. \
For detailed
connecting instructions and a list of compatible phones, please visit
www.InfinitiUSA.com/bluetooth.



•


When prompted for a PIN code, enter “1234” from the handset. (The\
PIN code is
assigned by INFINITI and cannot be changed.)
5.


Say the name of the phone when the system asks you to provide one.
y ou can give the
phone a name of your choice.
PHONEBOOK REGISTRATION
When the cellular phone is connected to the in-vehicle module, the data \
sto red in the
cellular phone such as phonebook, outgoing call logs, incoming call logs\
and missed call
logs is automatically transferred and registered to the system.
The availability of this function depends on each cellular phone. The co\
pyin g procedure
also varies according to each cellular phone. See your cellular phone Ow\
ner’s Manual for
more information.
Up to 1,000 phone numbers per registered cellular phone can be stored in\
the phonebook.
MAKING A CALL
1.


Press the button on the steering wheel. A tone will sound.
2.


Say “Call”. The system acknowledges the command and announces the \
next set of
available commands.
3.


Say the registered person’s name. The system acknowledges the command\
and
announces the next set of available commands.
4.


Say “

y
es”. The system acknowledges the command and makes the call.
RECEIVING/ENDING A CALL
To accept the call, press the
button on the steering wheel. To reject the call, press the button.
To hang-up, press the button.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (secti\
on 4)”
of your Owner’s
Manual or please visit www.InfinitiUSA.com/bluetooth.
1276473_14a_Q60_Convertible_QRG_062113.indd 186/21/13 3:32 PM

19
Navigation System (if so equipped)
y our Navigation System can calculate a route from the current location to\
a preferred
destination. The real-time map display and turn-by-turn voice guidance w\
ill lead you along
the route.
The Navigation System will continually update your vehicle’s position\
. If you have deviated
from the original route, it will recalculate the route from your current\
location.
01 Touch screen display.
02 S t A t US – Press multiple times to display audio information, the air conditi\
oner status, fuel
economy or navigation directions.
03 Destination (DES t ) – Press to enter a destination.
04 ZOOM OUt – Press to view a wider area.
05 r OU t E
– Press to access guidance control functions such as guidance cancell\
ation, route
priority or waypoint setting on the route.
06 Infiniti Controller
•


EN
t E r – Press the EN
t E r button to select the highlighted item on the screen.



•

Center Dial – Turn the dial to highlight an item on the screen, adjus\
t a setting or adjust the

map scale.



•

Slide the controller (push upward/downward/leftward/rightward) to sele\
ct an item on the

screen, to adjust a setting or scroll the map in 8 directions.
07 Information (INFO) – Press to display the vehicle, traffic (if so equipped), weather \
(if so
equipped) or voice recognition information.
02
04
0910
05
03
06
1213
11
0708
01
1276473_14a_Q60_Convertible_QRG_062113.indd 196/21/13 3:32 PM

20
system guide
08 – Press to switch between the day screen (bright) and the night sc\
reen (dark). Press an
hold the button to turn the display off. Press again to turn the display\
on.
09 ZOOM IN – Press to view the map in detail.
10 MAP – Press to display the map. While following a programmed route, pres\
s multiple times
to change the type of route information.
11 SE tt ING – Press to access the system settings.
12 BACk – Press to return to the previous screen. In a settings screen, this\
button can also
be used to apply the setting. In a character input screen, this button c\
an also delete the
characters that have been entered.
13 VOICE – Press to hear the current voice guidance for a programmed route.
For more information, please refer to your Navigation System Owner’s \
Manual.
DVD Player (if so equipped)
With this DVD player, you can play video
files via a



DVD or CD from the front display.
To view movies on the front display, stop the vehicle
in a safe location, move the shift lever to the P
(PA
rk ) position and apply the parking brake.
To reduce driver distraction, movies will not be
shown on the front display while the vehicle is in
any drive position.
For more information, refer to the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
1276473_14a_Q60_Convertible_QRG_062113.indd 206/21/13 3:32 PM

21
HomeLink® Universal Transceiver
The HomeLink® system can learn and consolidate the functions of up to 3 different
hand-held transmitters, operating items such as garage doors, property g\
ates, outdoor and
indoor lights or alarm systems.
To program the Homelink® Universal Transceiver:



•


Position the handheld transceiver 1-3 in (26-76 mm) away from the Home\
link® surface,
keeping the Homelink® indicator light in view.



•


Press and hold the desired Homelink® button and the handheld transmitter button
simultaneously until the Homelink® indicator light flashes slowly and then rapidly.



•


Both buttons may be released when the indicator light flashes rapidly.
To verify the programing is complete, press and hold the Homelink® and observe the
indicator light:



•


A solid continuous light indicates the programing is complete and the Ho\
melink®
button will activate your device.



•


A blinking light that turns to a solid continuous light after 2 seconds \
indicates
additional steps are required to complete the programing.
An additional person may make the remaining steps easier. To complete th\
e
programing process:



•

At the receiver of the device that you are programing to the Homelink®, press and
release the “learn” or “smart” button (the name may vary by\
manufacturer but it is
usually located near where the hanging antenna wire is attached to the u\
nit).
y ou have
approximately 30 seconds to initiate the following step.



•


Press and hold the programmed Homelink® button for 2 seconds and release.
Repeat the previous 2 steps up to 3 times to complete the programming pr\
ocess.
Homelink® should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink® website at
www.homelink.com or call 1-800-355-3515.
HOMELINK®
1276473_14a_Q60_Convertible_QRG_062113.indd 216/21/13 3:32 PM

Printing: July 2013 (07) / QR
14E GV
36U0 / Printed in USA
This Quick Reference Guide is intended to provide an overview of some of\
the unique features
of your new vehicle. See your Owner’s Manual, which contains importan\
t safety warnings and
information about the operation and maintenance of your vehicle, for com\
plete details. Nissan
North America, Inc. reserves the right to make changes, at any time, wit\
hout prior notice, in prices,
colors, materials, equipment, specifications, and models and to disconti\
nue models or equipment.
Due to continuous product development and other pre- and post-production\
factors, actual vehicle,
materials and specifications may vary. Some vehicles are shown with opti\
onal equipment. See
the actual vehicle for complete accuracy. Specifications, options and ac\
cessories may differ in
Hawaii, U.S. territories and other countries. For additional information\
on availability, options or
accessories, see your INFINITI retailer or contact Nissan North America,\
Inc.
2014 Infiniti Q60
To view detailed instructional videos,
go to www.infinitiownersinfo.mobi/2014/q60
or snap this barcode with an appropriate
barcode reader.
1276473_14a_Q60_Convertible_QRG_062113.indd 16/21/13 3:30 PM