2014 HONDA ODYSSEY Navigation Manual

120

Map Menu
Traffic Rerouting™
Navigation
Traffic Rerouting™When driving to your destination, the system automatically searches for a faster
route based on traffic flow information and traffic incidents. 2Map Screen Legend
P. 9
2Traffic Rerouting
P. 53
HENTER button (on map)
 Traffic Incidents
Manually avoid specific incidents and/or congestion on your route:
1.Rotate i to select an incident
from the list. Press u.

The system displays the map
screen and the incident location.
1Traffic Rerouting™
Automatic traffic rerouting may not provide a
detour route depending on circumstances.
■Traffic Rerouting™ Manually
1Traffic Rerouting™ Manually
d “Display traffic incidents”, d “Display traffic
list”
You can display traffic incidents and related
information on the map screen using voice
commands.
2Map Display Commands P. 308

121

Map Menu
Traffic Rerouting™
Navigation
2.Rotate i to select Avoid. Press
u.
Repeat step 1 to 2 as necessary.
3.Move r to select Reroute. Press
u.

The system recalculates a detour
route that avoids the traffic
incidents.
1Traffic Rerouting™ Manually
You can choose to avoid up to 10 traffic
incidents. It is not always possible for the system
to calculate a route that avoids all traffic
incidents or specific traffic incidents you select.
The “On Route” tab on the Traffic List screen is
only available during route guidance.
You cannot select an incident to avoid from the
“All” tab.
You can also detour around a traffic incident
manually if you encounter an unexpected
obstacle.
2Taking a Detour P. 130

122Navigation
Changing Your RouteHMENU button (when en route)
This section describes how to alter your route, add an interim “waypoint” (pit stop),
choose a different destination, cancel your current destination, and continue your
trip after stopping.
Rotate i to select an item. Press u.
The following items are available:
•Voice: Select to hear the voice guidance when en route.2Listening to Voice Guidance
P. 114
•Destination List: Shows a list of waypoints. You can delete waypoints or edit the
order of them.
2Editing the Destination List
P. 128
•Pause Guidance: Pauses your current route.
2Pausing the Route
P. 123
•Resume Guidance: Resumes your current route. This item is displayed while the
route guidance is paused.
•Cancel Route: Cancels the route guidance.
2Canceling the Route
P. 123
•View Routes: Displays three different routes.
2Viewing the Routes
P. 109
1Changing Your Route
d “Display Destination”, d “Display
Navigation” (when en route)
If you press the MENU button when not en
route, the Destination Menu screen is displayed.
2Entering a Destination P. 84

123

Changing Your Route
Pausing the Route
Navigation
•Change Route Preference: Changes the route preferences (calculating method). 2Route Preference
P. 50
•Detour: Calculates a detour route.
2Taking a Detour
P. 130
•Avoid Streets: Avoids streets along your route.
2Avoiding Streets
P. 130
Pausing the RouteHMENU button (when en route)
 Pause Guidance
Pause the route guidance and return to the map screen. The destination icons and all
waypoint flags remain displayed on the map. Press the MENU button when en route
and select Resume Guidance to resume the route guidance.
Canceling the RouteHMENU button (when en route)
 Cancel Route
Cancel the route guidance and remove the destination and all waypoints from the
destination list. The system then returns to the map screen.
1Pausing the Route
You can also pause your route from the Map
Menu.
2Map Menu P. 1161Canceling the Route
You can also cancel your route from the Map
Menu.
2Map Menu P. 116

124

Changing Your Route
Adding Waypoints
Navigation
Adding WaypointsAdd up to four waypoints (pit stops) along the route to your destination.
Waypoints are displayed on the map
screen as small, numbered red flags.
The route follows the waypoints in
the order they are listed in the
Destination List.
1Adding Waypoints
Waypoints allow you to stop for gas or food, for
example, and then continue on to your
destination.
Press the NAV button to return to the map
screen without adding a waypoint at any time.
The search corridor used for adding waypoints
can be adjusted.
2Edit POI Search Radius Along Route P. 54
You can delete waypoints or edit the order of
waypoints in the destination list.
2Editing the Destination List P. 128

125

Changing Your Route
Adding Waypoints
Navigation
HMENU button (when en route)
 Destination List
 Add New Destination

Find Along Route
1.Rotate i to select a search
method to add a waypoint. Press
u.
The following items are available:
•Search Around: Searches in a spiral pattern around the location you select.
•Search Along: Searches within a “corridor” on either side of the locations you
select.
2.Rotate i to select a waypoint
category (e.g., GAS STATION).
Press u.
■Adding Waypoints from the Route Menu
1Adding Waypoints
Search method
“Search around” method
“Search along” method
Continued

126

Changing Your Route
Adding Waypoints
Navigation
3.Rotate i to select a place. Press
u.
The waypoint is added to the
Destination List.
4.Rotate i to select a location and
move the order of destinations.
Press u.
5.Move r and rotate i to select
Start Route. Press u.

The route is automatically
recalculated and displayed on
the map screen.

127

Changing Your Route
Adding Waypoints
Navigation
HMENU button (when en route)
 Destination List
 Add New Destination

Use Nav Menu
1.Rotate i to select a method to
enter a waypoint.
2Entering a Destination
P. 84

A new destination is added to
the end of the Destination list.
2.Move r and rotate i to select
Start Route. Press u.

The route is automatically
recalculated and displayed on
the map screen.
■Adding Waypoints from the Navigation Menu
1Adding Waypoints from the Navigation Menu
You can edit the order of waypoints and
destination.
2Editing the Destination List P. 128