2014 HONDA ODYSSEY Navigation Manual

24

Voice Control System
Voice Recognition Settings
System Setup
Voice Recognition SettingsHSETTINGS button
 System Settings
 Voice Rec
Rotate i to select an item. Press u.
The following items are available:
•Volume: Adjusts the voice prompt volume level.
•Voice Prompt: Turns the voice prompt on or off.
On (factory default): Provides the voice prompts.
Off: Disable the feature.
•Song by Voice: Turns the Song By VoiceTM on or off.
2
Song By Voice
TM (SBV)
P. 184
•Song by Voice Phonetic Modification: Modifies a voice command of music
stored in the HDD or an iPod®.
2
Phonetic Modification
P. 186
•Phonebook Phonetic Modification: Modifies a voice command for the
phonebook.
2
Phonebook Phonetic Modification
P. 216

25System Setup
Interface SettingsDisplay SettingsHSETTINGS button
 System Settings
 Display
Adjusts the screen’s preferences.
1.Rotate i to select an item. Press
u.
2.Rotate i to make the
adjustment. Press u.
The following items are available:
•Brightness: Adjusts the screen’s brightness.
•Contrast: Adjusts the screen’s contrast.
•Black Level: Adjusts the screen’s black level.
1Display Settings
You can set separate daytime and nighttime
settings for Brightness, Contrast, and Black
Level. Adjust each setting when the display is in
either daytime or nighttime mode.

26

Interface Settings
Sound and Beep Settings
System Setup
Sound and Beep SettingsHSETTINGS button
 System Settings
 Sound/Beep
Changes the system sound and beep settings.
Rotate i to select an item. Press u.
The following items are available:
•Volume: Adjusts the navigation system volume level.
•Interface Dial Feedback: Sets if and when the system reads aloud a selection
made using the Interface Dial.
On: Always reads the selection.
Off: Disables the feature.
Auto (factory default): Reads the selection only when the vehicle is moving.
•Message Auto Reading: Selects whether the system automatically reads out
messages, and, if selected, whether only when driving.
On: Always reads the message.
Off: Disables the feature.
Auto (factory default): Reads the message only when the vehicle is moving.
•Verbal Reminder: Turns the verbal reminders on and off.
On: Sets the verbal reminders.
Off: Disables the feature.
1Sound and Beep Settings
Volume
If you set Volume to 0, you will not hear route
guidance or voice command confirmations.
If you then select Voice in the Map Menu, you
will hear route guidance at the default volume.

27

Interface Settings
Clock Adjustment
System Setup
Clock AdjustmentHSETTINGS button
 System Settings
Clock
Set the automatic adjustment of the system clock for daylight saving and
international time zones.
Rotate i to select an item. Press u.
The following items are available:
•Clock/Wallpaper Type: Changes the clock display type and the wallpaper type.
2
Setting the Clock Type
P. 28
•Clock Adjustment: Adjust the current time manually.
2
Setting the Clock
P. 28
•Clock Format: Sets the time notation to either 12-hour clock (12H, factory
default) or 24-hour clock (24H).
•Auto Time Zone: The navigation system automatically adjusts the clock when
driving through different time zones.
On (factory default): Adjusts the clock automatically.
Off: Disables the feature.
•Auto Daylight: The navigation system automatically adjusts the clock (“spring
ahead” or “fall back” by one hour) when a daylight saving time change occurs.
On (factory default): Adjusts the clock automatically.
Off: Disables the feature.
•Clock Reset: Resets the settings of all items in the Clock group.
1Clock Adjustment
Auto Time Zone
If you live and work in two different time zones,
you may want to turn Auto Time Zone to OFF.
When driving near a time zone boundary, the
displayed time zone may fluctuate between the
two zone times.
Auto Daylight
This function is not activated in areas that have
not adopted daylight saving time, even if you
have set Auto Daylight to ON.
You can turn the clock display in the navigation
screen on and off.
2Header Clock Display P. 35

28

Interface Settings
Clock Adjustment
System Setup
HSETTINGS button  System Settings  Clock  Clock/Wallpaper Type 
Clock
1.Rotate i to select an option to
change the design. Press u.
2.Move r to select OK. Press u.
HSETTINGS button
 System Settings
 Clock
 Clock Adjustment
1.Rotate i to select an item. Press
u.
2.Rotate i to select a minute. Press
u.
■Setting the Clock Type■Setting the Clock

29

Interface Settings
Wallpaper Settings
System Setup
Wallpaper SettingsSelect, delete, and import wallpaper pictures for display on the screen.
HSETTINGS button
 System Settings
 Clock
 Clock/Wallpaper Type
1.Connect the USB flash drive to the
USB port.
2.Move y to select Wallpaper.

The screen will change to the
wallpaper list.
3.Move r and rotate i to select
Add New Wallpaper. Press u.
4.Rotate i to select a desired
picture. Press u.

The preview is displayed on the
left side on the screen.
5.Move r and rotate i to select
Start Import. Press u.

The confirmation message will
appear. Then the display will
return to the wallpaper list.
■Import wallpaper
1Wallpaper Settings•When importing wallpaper files, the image
must be in the USB flash drive’s root directory.
Images in a folder cannot be imported.•The file name must be fewer than 210 bytes.•The file format of the image that can be
imported is BMP (bmp) or JPEG (jpg).•The individual file size limit is 6 MB.•The maximum image size is 4,800 x 4,800
pixels. If the image size is less than 420 × 234
pixels, the image is displayed in the middle of
the screen with the extra area appearing in
black.•Up to 10 files can be saved.•If the USB flash drive does not have any
pictures, the No files detected message
appears.

30

Interface Settings
Wallpaper Settings
System Setup
HSETTINGS button
 System Settings
 Clock
 Clock/Wallpaper Type

Wallpaper
1.Rotate i to select a desired
wallpaper. Press u.

The preview is displayed on the
left side on the screen.

The pop-up menu appears on
the screen.
2.Rotate i to select Set. Press u.

The display will return to the
wallpaper list.
■Select wallpaper
1Select wallpaper
From the pop-up menu, rotate to select Preview
and press to see a preview at full-size screen.
To go back to the previous screen, press to select
OK, or press the BACK button.
When the file size is large, it takes a while to be
previewed.

31

Interface Settings
Wallpaper Settings
System Setup
HSETTINGS button
 System Settings
 Clock
 Clock/Wallpaper Type

Wallpaper
1.Rotate i to select a previously
imported wallpaper that you want
to delete. Press u.

The preview is displayed on the
left side on the screen.

The pop-up menu appears on
the screen.
2.Rotate i to select Delete. Press
u.

The confirmation message will
appear.
3.Rotate i to select Yes. Press u.

The display will return to the
wallpaper list.
■Delete wallpaper
1Delete wallpaper
You cannot delete the factory default images.