2014 FORD F250 SUPER DUTY four wheel drive

[x] Cancel search: four wheel drive

Page 156 of 460

FORD F250 SUPER DUTY 2014  Owners Manual If SHIFT DELAYED PULL FORWARD isdisplayed in the information display,transfer case gear tooth blockage ispresent. To alleviate this condition, placethe transmission in a forward gear, movethe vehicle

Page 157 of 460

FORD F250 SUPER DUTY 2014  Owners Manual Four-wheel drive (when you select a 4WDmode) uses all four wheels to power thevehicle. This increases traction, enablingyou to drive over terrain and roadconditions that a conventional two-wheeldrive

Page 158 of 460

FORD F250 SUPER DUTY 2014  Owners Manual Mud and Water
Mud
Be cautious of sudden changes in vehiclespeed or direction when you are driving inmud. Even four-wheel drive vehicles canlose traction in slick mud. If your vehicledoes slide, steer

Page 159 of 460

FORD F250 SUPER DUTY 2014  Owners Manual If your vehicle has anti-lock brakes, applythe brakes steadily. Do not pump thebrakes.
Driving on Snow and Ice
WARNING
If you are driving in slipperyconditions that require tire chains orcables, then

Page 160 of 460

FORD F250 SUPER DUTY 2014  Owners Manual On some Four-wheel drive vehicles, whenthe transfer case is in the N (Neutral)position, the engine and transmission aredisconnected from the rest of the driveline.Therefore, the vehicle is free to rol

Page 166 of 460

FORD F250 SUPER DUTY 2014  Owners Manual PRINCIPLE OF OPERATION
The traction control system helps avoiddrive wheel spin and loss of traction.
If your vehicle begins to slide, the systemapplies the brakes to individual wheelsand, when needed,

Page 201 of 460

FORD F250 SUPER DUTY 2014  Owners Manual It is acceptable to have your two-wheeldrive vehicle towed with the front wheelson the ground (without dollies) and therear wheels off the ground.
We recommend towing a four-wheel drivevehicle with al

Page 202 of 460

FORD F250 SUPER DUTY 2014  Owners Manual Four-wheel Drive Vehicles Equippedwith a Manual-shift Transfer Case
1. Put the transmission in position N.
2. Put the transfer case in position N.
3.Put the hub locks in the FREE position.Always make
Page:   < prev 1-8 9-16 17-24 25-32 next >