2014 FORD F150 light

[x] Cancel search: light

Page 161 of 472

FORD F150 2014 12.G Owners Manual Avoid driving at excessive speeds, this
causes vehicle momentum to work against
you and your vehicle could become stuck
to the point that assistance may be
required from another vehicle. Remember,
you

Page 162 of 472

FORD F150 2014 12.G Owners Manual Descend a hill in the same gear you would
use to climb up the hill to avoid excessive
brake application and brake overheating.
Do not descend in neutral. Disengage
overdrive or move the transmission
s

Page 164 of 472

FORD F150 2014 12.G Owners Manual LIMITED SLIP DIFFERENTIAL
(IF EQUIPPED)
This axle provides added traction on
slippery surfaces, particularly when one
wheel is on a poor traction surface. Under
normal conditions, the limited-slip axl

Page 165 of 472

FORD F150 2014 12.G Owners Manual For 4WD vehicles
Pull the 4WD control knob toward you.
For 2WD vehicles
Turn the control to ON.
Once the indicator light
illuminates in the information
display, both rear wheel axle
shafts will be loc

Page 166 of 472

FORD F150 2014 12.G Owners Manual GENERAL INFORMATION
Note:
Occasional brake noise is normal. If
a metal-to-metal, continuous grinding or
continuous squeal sound is present, the
brake linings may be worn-out. Have the
system checked b

Page 167 of 472

FORD F150 2014 12.G Owners Manual PARKING BRAKE
WARNING
Always set the parking brake fully
and make sure the transmission is
placed in park (P). Failure to set the
parking brake and engage park could result
in vehicle roll-away, prope

Page 169 of 472

FORD F150 2014 12.G Owners Manual PRINCIPLE OF OPERATION
The traction control system helps avoid
drive wheel spin and loss of traction.
If your vehicle begins to slide, the system
applies the brakes to individual wheels
and, when need

Page 171 of 472

FORD F150 2014 12.G Owners Manual USING STABILITY CONTROL
AdvanceTrac
™ with Roll Stability
Control ™ (RSC™)
The system automatically activates when
you start your engine. You can turn off the electronic stability control and ro