Page 72 of 292

70
C3Picasso_en_Chap05_visibilite_ed01-2014
Lighting controlsSystem for selection and control of the various front and rear lamps providing the vehicle's lighting.
Main lighting
The various front and rear lamps of the vehicle 
are designed to adapt the driver's visibility 
progressively according to climatic conditions:
- 
s
 idelamps, to be seen,
-
 
d
 ipped beam headlamps to see without 
dazzling other drivers,
-
 
m
 ain beam headlamps to see clearly when 
the road is clear.
Additional lighting
other lamps are installed to fulfil the 
requirements of particular conditions of 
visibility:
-
 
a r
 ear foglamp to be seen from afar,
-
 
f
 ront foglamps for even better for ward 
vision.
Programming
Various automatic lighting control modes 
are also available according to the following 
options:
-
 gu
ide-me-home lighting,
-
 
a
 utomatic illumination of headlamps.
Model without AUTO lighting
Model with AUTO lighting
automatic illumination of 
headlamps.
Manual controls
The lighting is controlled directly by the driver 
by means of the ring A and the stalk B .
A.
 M
ain lighting mode selection ring: turn it 
to position the symbol required facing the 
mark.
Lighting off / daytime running lamps.
Sidelamps.
B.
 S
talk for switching headlamps: pull the stalk 
towards you to switch the lighting between 
dipped and main beam headlamps.
In the lamps off and sidelamps modes, the driver 
can switch on the main beam headlamps temporarily 
("headlamp flash") by maintaining a pull on the stalk.
dipped headlamps or main 
beam headlamps.
Displays
Illumination of the corresponding indicator 
lamp in the instrument panel confirms that the 
lighting selected is on. 
Visibility  
         
        
        
     
        
        Page 73 of 292

71
C3Picasso_en_Chap05_visibilite_ed01-2014
Model with rear foglamp only
Rear foglamp
F
 
T
o switch on the foglamp, turn the ring C 
forwards.
When the lighting is switched off automatically 
(with AUTO model), the foglamp and the dipped 
beam headlamps will remain on.
F
 
T
o switch off all of the lighting, turn the 
ring
 
C rearwards.
Model with front foglamps and a 
rear foglampFront and rear foglamps
Rotate and release the ring C :
F
 
f
or wards a first time to switch on the front 
foglamps,
F
 
f
or wards a second time to switch on the 
rear foglamp,
F
 
r
ear wards a first time to switch off the rear 
foglamp,
F
 
r
ear wards a second time to switch of the 
front fog lamps.
C.
 F
oglamp selection ring.
The foglamps operate with the dipped and main 
beam headlamps. When the lighting is switched off automatically 
(with AUTO model) or when the dipped 
headlamps are switched off manually, the 
foglamps and sidelamps will remain on.
F 
T
 urn the ring rear wards to switch off the 
foglamps, the sidelamps will then switch 
of f.
In good or rainy weather, by both day 
and night, the front foglamps and the 
rear foglamp are prohibited. In these 
situations, the power of their beams 
may dazzle other drivers.
Do not forget to switch off the front 
foglamps and the rear foglamp when 
they are no longer necessary.
5 
Visibility  
         
        
        
     
        
        Page 74 of 292

72
C3Picasso_en_Chap05_visibilite_ed01-2014
Manual guide-me-home 
lighting
The temporary illumination of the dipped beam 
headlamps after the vehicle's ignition has been 
switched off makes the driver's exit easier 
when the light is poor.
Switching on
F With the ignition off, "flash" the headlamps using the lighting stalk.
F
 
A f
 urther "headlamp flash" switches the 
function off.
Switching off
The manual guide-me-home lighting switches 
off automatically after a set time.
Lighting on audible warning
When the ignition is switched off, all 
of the lamps switch off automatically, 
unless guide-me-home lighting is 
activated.
If the lighting is switched on manually 
after switching off the ignition, there 
is an audible signal when a front door 
is opened to warn the driver that they 
have forgotten to switch off the vehicle's 
lighting, with the ignition off.
In some weather conditions (e.g. low 
temperature or humidity), the presence 
of misting on the internal sur face of the 
glass of the headlamps and rear lamps 
is normal; it disappears after the lamps 
have been on for a few minutes. 
Visibility  
         
        
        
     
        
        Page 75 of 292

73
C3Picasso_en_Chap05_visibilite_ed01-2014
Linked with the Guide-me-home 
lighting
Association with the automatic illumination 
of headlamps provides the guide-me-home 
lighting with the following additional options:
- 
a
 utomatic activation of guide-me-home 
lighting when automatic illumination of 
headlamps is switched on (in the vehicle 
parameters of the multifunction screen 
configuration menu),
-
 
s
 election of the duration of maintaining of 
the lighting for 15, 30 or 60 seconds in the 
vehicle parameters of the multifunction 
screen configuration menu (except for 
monochrome screen A  where this is 
preset).
Operating fault
In the event of a malfunction of the 
sunshine sensor, the lamps come 
on, this warning lamp is displayed 
in the instrument panel and/or a message appears 
in the multifunction screen, accompanied by an 
audible signal.
Contact a CITROËN dealer or a qualified workshop.
In fog or snow, the sunshine 
sensor may detect sufficient light. 
Therefore, the lamps will not come on 
automatically.
do n
ot cover the sunshine sensor, 
linked with the rain sensor and located 
in the centre of the windscreen behind 
the rear view mirror; the associated 
functions would no longer be controlled.
Automatic illumination of 
headlamps
The sidelamps and dipped beam headlamps are 
switched on automatically, without any action on the part 
of the driver, when a low level of external light is detected 
or in certain cases of activation of the windscreen wipers.
as s
oon as the brightness returns to a sufficient level or 
after the windscreen wipers are switched off, the lamps 
are switched off automatically.
Activation
F Turn ring A  to the "AUTO"  position. The automatic 
illumination of headlamps is accompanied by a 
message in the multifunction screen.
Deactivation
F Turn ring A to a position other than  "AUTO" . 
de activation is accompanied by a 
message in the multifunction screen.
5 
Visibility  
         
        
        
     
        
        Page 79 of 292
77
C3Picasso_en_Chap05_visibilite_ed01-2014
Wiper controls
Manual controls
The wiper commands are issued directly by the 
driver by means of the stalk A and the ring B.
Model with intermittent wiping
Model with AUTO wiping
Fast (heavy rain).
no
rmal (moderate rain).
Intermittent (proportional to the 
speed of the vehicle).
Automatic, then single wipe (see 
the corresponding section).
of
f.
Single wipe (press down and 
release).
Programming
Various automatic wiper control modes are also 
available according to the following options:
-
 a
utomatic rain sensitive windscreen wipers,
-
 
r
 ear wiping on engaging reverse gear.
Windscreen wipers
A. Wiping speed selection stalk.
or
System for selection and control of the various 
front and rear wiping modes for the elimination 
of rain and cleaning.
The vehicle's front and rear wipers are 
designed to improve the driver's visibility 
progressively according to the climatic 
conditions.
5 
Visibility  
         
        
        
     
        
        Page 80 of 292
78
C3Picasso_en_Chap05_visibilite_ed01-2014
Windscreen wash
Pull the wiper stalk towards you. The 
windscreen wash, then the windscreen wipers, 
operate for a pre-determined time.
B.
 R
ear wiper selection ring:
park,
intermittent wipe,
wash-wipe (set duration).
Reverse gear
When reverse gear is engaged, the rear wiper 
will operate if the windscreen wipers are 
operating.
Programming
The function is activated or deactivated via the 
multifunction screen configuration menu.
This function is activated by default.
Rear wiper Wiping zoneThe curved shape of the rear screen results in 
a smaller wiping zone.
If a significant accumulation of snow or 
ice is present, or when using a tailgate 
bicycle carrier, deactivate the automatic 
rear wiper via the multifunction screen 
configuration menu. 
Visibility  
         
        
        
     
        
        Page 81 of 292

79
C3Picasso_en_Chap05_visibilite_ed01-2014
Vertical windscreen wiper 
position
Automatic rain sensitive 
windscreen wipers
The windscreen wipers operate automatically, 
without any action on the part of the driver, if rain 
is detected (sensor behind the rear view mirror), 
adapting their speed to the intensity of the rainfall.
Activation
This is controlled manually by the driver by 
pushing the stalk downwards to the "AUTO"
 
position.
It is accompanied by a message in the screen. This position allows the wiper blades to be lifted 
for winter parking, cleaning or replacement 
without damaging the bonnet.
In the minute following switching off of the 
ignition, any action on the wiper stalk positions 
the wipers vertically.
To park the wipers after this has been done, 
switch on the ignition and operate the wiper stalk.
Switching off
This is controlled manually by the driver by 
moving the stalk upwards then returning it to 
position "0"
.
Operating fault
If an automatic wiping malfunction occurs, the 
wipers will operate in intermittent mode.
Have it checked by a CITR
oËn
 dealer or a 
qualified workshop. It is accompanied by a message in the 
screen.
The automatic rain sensitive wipers 
must be reactivated if the ignition has 
been off for more than one minute, by 
pushing the stalk downwards.
Do not cover the rain sensor, linked with 
the sunshine sensor and located in the 
centre of the windscreen behind the rear 
view mirror.
Switch off the automatic rain sensitive 
wipers when using an automatic car wash.
In winter, to avoid damaging the wiper 
blades, it is advisable to wait until the 
windscreen is completely clear of ice 
before activating the automatic rain 
sensitive wipers.
To retain the effectiveness of the flat 
wiper blades, it is advisable to:
-
 
h
 andle them with care,
-
 
c
 lean them regularly using soapy 
water,
-
 
n
 ot use them to hold a sheet of 
cardboard against the windscreen,
-
 
r
 eplace them at the first signs of 
w e a r.
5 
Visibility  
         
        
        
     
        
        Page 82 of 292

80
C3Picasso_en_Chap05_visibilite_ed01-2014
Courtesy lampsSelection and control of the various passenger compartment lamps.
1.
 F
ront courtesy lamp
2.
 M
ap reading lamps
3.
 R
ear courtesy lamp
Front and rear courtesy lamps
Map reading lamps
F With the ignition on, press the corresponding switch.
In this position, the courtesy lamp 
comes on gradually:
Permanently off.
Permanent lighting.
It switches off gradually:
-
 
w
hen the vehicle is locked,
-
 
w
hen the ignition is switched on,
-
 
3
0 seconds after the last door is closed.
-
 
w
hen the vehicle is unlocked,
-
 
w
hen the key is removed from the ignition,
-
 
w
hen a door is opened,
-
 
w
hen the remote control locking button is 
pressed, in order to locate your vehicle.
Footwell lighting
These lamps come on at the same time as the 
courtesy lamps.
In permanent lighting mode, different lighting times 
are available:
- with the ignition off, approximately ten minutes,- in energy economy mode, approximately 
thirty  seconds,
- with the engine running, unlimited. 
Visibility