Page 41 of 92
Black plate (41,1)Chevrolet Captiva Sport Infotainment System (GMNA-Localizing-US/Canada-
6225549) - 2014 - 2nd crc - 9/16/13
Infotainment System 41
3. Select the desired POI.A Destination Confirmation
displays options for saving or
entering a route.
Not all listed Categories may be
selectable while the vehicle is in
motion. The All POIs category is
always selectable.
Franchise Search
Press to access POI Franchise
Search to choose a method for
searching POI franchises. The
method of search can be narrowed
by entering specific ways for
searching the POI franchises. Searching for POI franchises will
display the same menus as if
searching for POI categories. Follow
the instructions as stated earlier
when searching for POI categories.
Show POIs on Map
Press to access the Show POIs on
Map menu. Press On or Off to
display the icons on the map. If On
is selected, press the desired icons
to show on the map.
Pressing NAV will display the map
along with the selected icons.
Exit List
Press to display a list of POI exits
while on the highway.
Back Track
Press to initiate the Back Track
feature.
Current Position Information
1. Press to display a split screen
showing detailed information
about the vehicle position. This
feature can also be accessed by pressing the vehicle information
tab on the lower center of the
display.
2. When on route, press Save to Address Book to save the
selected destination displayed
on the map.
Map Adjustments
The system lets you adjust the scale
of view on the map. Also, as you
drive, the map scrolls automatically
based on the direction of travel.
Map Scales
Page 42 of 92
Black plate (42,1)Chevrolet Captiva Sport Infotainment System (GMNA-Localizing-US/Canada-
6225549) - 2014 - 2nd crc - 9/16/13
42 Infotainment System
There are two methods to change
the map scale:
.Press + or−next to the map
scale button on the left bottom
corner of the map screen to
change the zoom level.
.Press the actual scale bar at the
bottom of the map to the desired
increment of zoom.
The map scale bar times out if
the zoom level is not changed
within a few seconds.
The scale can be configured for
metric or English units. To change
from metric to English or vice versa,
see “Driver Information Center
(DIC)” in the owner manual.
Scroll Features
.To scroll within the map, touch
anywhere on the map screen
and the scroll symbol displays.
.Press the map to center at the
desired location.
.Press and hold the screen in any
direction outside the scroll
symbol to scroll the map in that
direction.
.Scroll speed increases when
touching closer to the edge of
the screen.
.Press NAV on the faceplate to
exit map scrolling and return to
the current vehicle location on
the map.
Press the cycling arrows at the top
of the map screen to toggle from the
normal top bar (audio information
bar) to the Back, Home, FAV, and
local voice recognition icon.
Maps
This section includes basic
information about the map
database.
The maps are stored in the
navigation system.
Detailed Areas
Road network attributes are
contained in the map database for
detailed areas. Attributes include
information such as street names,
street addresses, and turn
restrictions. A detailed area includes
all major highways, service roads,
and residential roads. The detailed
areas include points of interest
(POIs) such as restaurants, airports,
banks, hospitals, police stations,
gas stations, tourist attractions, and
historical monuments. The map
database may not include data for
newly constructed areas or map
database corrections that are
completed after production of the
Page 43 of 92
Black plate (43,1)Chevrolet Captiva Sport Infotainment System (GMNA-Localizing-US/Canada-
6225549) - 2014 - 2nd crc - 9/16/13
Infotainment System 43
system. The navigation system
provides full route guidance in the
detailed map areas.
Navigation Symbols
Following are the most common
symbols that appear on a map
screen.
The vehicle symbol indicates the
current position and heading
direction of the vehicle on the map.
The destination symbol marks the
final destination after a route has
been planned.
The waypoint symbol marks one or
more set waypoints.
A waypoint is a stopover destination
point added to the planned route.
The estimated time and distance to
the destination are displayed.
If waypoints have been added to the
current route, each waypoint
destination displays estimated time
and distance.
This symbol indicates that the map
view is North up: North up displays
North at the top of the map screen
regardless of the direction the
vehicle is traveling. Select this
screen symbol to change the view
to Heading up.
This symbol indicates that the map
view is Heading up.
Heading up view displays the
direction the vehicle is traveling at
the top of the map screen. The
shaded triangle indicates North.
Page 44 of 92
Black plate (44,1)Chevrolet Captiva Sport Infotainment System (GMNA-Localizing-US/Canada-
6225549) - 2014 - 2nd crc - 9/16/13
44 Infotainment System
Press this screen symbol to change
to 3D mode.
The 3D symbol is the same as the
Heading up symbol, but the map is
in 3D.
Press this again to change back to
the North up symbol.
The No GPS symbol appears when
there is no Global Positioning
System (GPS) satellite signal.
The Map Mode icon at the bottom of
a map screen brings up the map
modes pop-up screen.
Destination
If route guidance is not active, press
the Destination screen button on the
Home Page or the DEST button on
the faceplate to access the
Destination screen. Several options
can be selected to plan a route by
entering destinations. Some
destination entry items such as
Previous Destinations and Address
Book may be grayed out if no
destination was previously entered
or saved.
If route guidance is active, press the
DEST button on the faceplate to
access other destination options on
the route.Alpha-Numeric Keyboard
Letters of the alphabet, symbols,
punctuation, and numbers, when
available, display on the navigation
screen as alpha/numeric keyboards.
The alpha keyboard displays when
data needs to be entered.
QWERTY or ABCDEF:
Press to
toggle between QWERTY or
ABCDEF keyboard character
layouts.
Symbols: Use to select symbols.
Space: Use to enter a space
between characters or the words of
a name.
Delete: Press to delete an incorrect
character that has been selected.
Press and hold to erase all text
entered on the selected line.
Address Entry
Press the Address Entry screen
button to display the Enter Address
screen. Set a route by entering the
state name, city name, street name,
house number, or junction.
Page 45 of 92
Black plate (45,1)Chevrolet Captiva Sport Infotainment System (GMNA-Localizing-US/Canada-
6225549) - 2014 - 2nd crc - 9/16/13
Infotainment System 45
If no state or province has been
entered previously, the city and
state fields are not available. Press
the screen button at the right of the
city name to select a state or
province.
If the state or province was
previously set and is displayed,
press the screen button at the right
of the city name to change the
selected state or province.
To make name selection easier, the
system highlights only characters
that are available after the
previously entered one.
State:Select a state name. City:
Enter a city name.
Street: Enter a street name.
House #: Enter a valid address
number.
Junction: Enter a street name that
intersects with the selected street.
After entering the destination
information and selecting Done, the
Destination Confirmation screen
displays preference options. Choose
one of these or simply start
guidance from the screen.
The State, City, Street, House #,
or Junction must be entered in
order.
Entering the state name first:
1. Select the state name, unless a
previously entered state already
exists.
2. Enter the city name. 3. Enter the street name. Use the
Delete screen button to delete
an incorrectly entered character.
A list displays if five or fewer
names are available. If there are
more than five, there is a match
counter with a number of
available streets. Press the List
screen button to view the list and
select the street.
4. Enter the house number.
5. Press the Done screen button at any time and the system tries to
resolve a destination based on
the entered information, then
displays it on the Destination
Confirmation screen.
Page 46 of 92
Black plate (46,1)Chevrolet Captiva Sport Infotainment System (GMNA-Localizing-US/Canada-
6225549) - 2014 - 2nd crc - 9/16/13
46 Infotainment System
6. Press the Start Guidance screenbutton and the route calculates.
Entering the street name first:
1. Make sure the state has been entered before selecting the
street name field. Enter the
street name. Do not enter
directional information or street
type. Use the Delete screen
button to delete an incorrect
character.
A list displays if six or fewer
names are available. If there are
more than six, press the List
screen button to view the list and
select the street.
2. Select the city from the list or enter the city name. 3. Enter the house number.
4. Press the Done screen button.
5. Press the Start Guidance screen
button and the route calculates.
Points of Interest (POI)
Press the Points of Interest screen
button on the Destination Entry
page. Several options can be
selected to plan a route.
The POI entry list allows selection of
a destination.
Entering by POI name:
1. Select Name.
2. Enter the POI name.
3. Select a few of the characters or spell the name in full, by
pressing on the alpha keyboard.
4. Press the List screen button, or if the list has five or fewer
items, a list of POIs will
immediately display.
5. Press on the desired POI.
Page 47 of 92
Black plate (47,1)Chevrolet Captiva Sport Infotainment System (GMNA-Localizing-US/Canada-
6225549) - 2014 - 2nd crc - 9/16/13
Infotainment System 47
6. Press the Start Guidance screenbutton and the route calculates.
Previous Destinations
Select a destination from the
Previous Destinations List. Up to
15 points that have been previously
entered can be recalled. If the list is
full, the oldest destinations are
automatically deleted once the
newest destinations are added.
Address Book
If no destination is saved to the
address book, save a destination:
1. Press the Home Page Destination icon or DEST
faceplate button. 2. Enter an address using any of
the destination methods
(Address Entry, POI Entry, etc.).
3. On the Destination Confirmation screen, select Save.
4. The system displays the options Name, Number, Icon, and Done.
5. To customize the address book entry, select Name, Number,
or Icon.
6. Press Done to save the destination.
Press the Home Page Destination
icon or DEST faceplate button to
display the Address Book screen
button.
Choose a destination by selecting
an address that has been stored in
the address book:
1. Press the Address Book screen button. A list displays the
address book entries.
2. Select the destination from the list. 3. Press the Start Guidance screen
button and the route calculates.
To edit address book entries:
1. Select an item from the address book.
2. On the Destination Confirmation screen, select Edit.
3. The system displays the options Name, Number, Icon, and
Delete. Press Delete to delete
the destination from the
address book.
4. To customize the address book entry, select Name, Number,
or Icon.
Page 48 of 92
Black plate (48,1)Chevrolet Captiva Sport Infotainment System (GMNA-Localizing-US/Canada-
6225549) - 2014 - 2nd crc - 9/16/13
48 Infotainment System
Latitude/Longitude Coordinates
Choose a destination based on
latitudinal and longitudinal
coordinates.
To enter the location as coordinates,
latitude and longitude:
1. Press the Home Page screenbutton. Press the Latitude
Longitude screen button to
display the entry screen .
2. Enter the Latitude and Longitude coordinates for the destination in
degrees, minutes, and seconds.
3. Press the Search screen button if the information is correct.
4. Press the Start Guidance screen button. The route calculates. Trips
Trips are a way of entering multiple
destinations along the route.
Adding a trip:
Current routes must be canceled
before entering a new trip.
1. Press the Home Page
Destination icon or DEST
faceplate button to display the
Trips screen button.
2. Press the Trips screen button to display Trips List.
3. Select New Trip to display a screen instructing to add a
waypoint.
4. Press OK and the Add Waypoint screen displays. 5. Press Add to display the
Waypoint Entry screen. Select
the preferred way of entry and
then press the Save screen
button. See “Waypoints” later in
this section.
6. The route must be started to have the option of saving up to
three more waypoints as a trip.
Press DEST on the faceplate or
the Home Page Destination icon
to get to the Waypoints menu. In
the Waypoints menu, press the
Save as Trip screen button.
7. Enter a name for the trip by using the keyboard and
press OK.
Selecting a trip:
1. Press the Home Page Destination or DEST faceplate
button to display the Trips
screen button.
2. Press the Trips screen button to display a list of available trips.
3. Select a trip to display the Destination Confirmation screen.
