2014 AUDI R8 SPYDER instrument cluster

(!) Adjuster control for outside mir-rors .... ..... .......... .. .
@ Door handle
@ Power locking switch
© Switches for:
- Front lid release .......... .
- Fuel filler flap release . .. .. .
® Air outlets ............ .... .
® Light switch ............... .
(J) Turn signal and high beam ... .
@ Multifunction steering wheel
with:
- Horn
- Driver's airbag ........... .
- Audio, telephone and voice
control system operating but­
tons
- Shift buttons for manual oper-
at ion (R tronic) ........... .
® Instrument cluster
@ Switches for:
so
32
33
169
65
46
47
115
81
8
- Windshield wiper/washer 51
- Trip computer . . . . . . . . . . . . . 21
- Menu display . . . . . . . . . . . . . 22
- Lap Timer . . . . . . . . . . . . . . . . 25
- Speed warning system . . . . . . 72
@ Steering lock/ignition/starter
switch (in the steering wheel
column) . . . . . . . . . . . . . . . . . . . 68
@ Adjustable steering column . . . 68
@ Cruise control . . . . . . . . . . . . . . 73
@ Instrument lighting . . . . . . . . . 49
@) Data Link Connector (DLC) for
On Board Diagnostics (OBD II) 26
@) Power window switches . . . . . . 35
@ Navigation system
@ Glove compartment (lockable) 61
@ Front passenger's airbag . . . . . 115
@ Rear window defogger switch 67
@ Climate controls . . . . . . . . . . . . 63
@ Gear shift lever or selector lever
(5 tronic):
- Manual transmission
- 5 tronic . . . . . . . . . . . . . . . . . . 78
@ Switches for:
Cockpit 7
-Audi magnetic ride ........ . 75
-Electronic Stabilization Con-
trol . . . . . . . . . . . . . . . . . . . . . 144
- Emergency flasher . . . . . . . . . 48
- Retractable rear spoiler . . . . . 148
- Parking system . . . . . . . . . . . . 84
@ Convertible top switch . . . . . . . 37
@ Rear window switch . . . . . . . . . 39
@ Parking brake lever . . . . . . . . . . 70
(D Tips
-Some of the equipment or features
shown in the general illustration may be
standard equipment on your vehicle or
my be optional equipment depending on
your model.
- A separate brochure is provided for your
factory-installed audio system and/or
the Audi Navigation System .

8 Instruments and warning /indicator lights
Instruments and warning/indicator Lights
Instruments
Instrument cluster and controls
The instrument cluster is your central source of information.
Fig. 3 Ove rv iew of t he inst ru m ent cluster
(D Eng ine o il temperatu re . . . . . . . 8
@ Ta ch ome ter w ith time an d date
d isplay . . . . . . . . . . . . . . . . . . . . 9, 9
® Coolant temperature gauge . . . 9
© Fuel gauge............ .. .. . 10
® Speedometer with odometer . . 10
@ Vol tmeter . . . . . . . . . . . . . . . . . 11
(i) Se t/Check bu tton . . . . . . . . . . . 9
@ Driver information display . . . . 20
® I RESE T! bu tton for trip odome-
ter 10
The illumination for t he instrument cluster
lights up whenever you switch on the ignition
with the
vehicle headlights off . The gauges
a re a lso illumina ted when the lights a re
turned o n.
Engine oil temperature display
The engine oil temperature display ¢ page 8,
fig. 3 only operates w ith the ignition on. To
prevent engine damage, please obse rve the
following important points concerning the
temperature ranges.
Cold range
If the needle is at the bottom of the gauge,
t h e e ngine oil has not reac hed operat ing tem­
perature yet . Avoid high eng ine speeds, full
t hr ottle applicat io ns and heavy eng ine loads .
Normal range
The eng ine has reached ope rating tempera­
ture when the needle moves into the center of
the gauge under normal driv ing cond itions .
T he needle may move high er on the ga uge
with heavier e ngine lo ad at hig h outs ide tem­
per atures. This is not a c ause for con cern as
lo ng a s th e . indic ator light in the disp lay
does not flash.
Warning light.
If the symbol . in the d isplay flashes, ei­
t h e r th e engine oil te mpera ture is too high o r
t h e e ngine o il leve l is too low¢
page 178 .
If the needle is well in the uppe r area of the
gauge, the e ngine oil temperature is too h igh .
Stop the vehicle, switch the engine off and
allow it to cool.
I f th e war ning l igh t co mes on
again afte r driving a short d istance, co ntact
an a uth o rized Audi dea le r.

Instrument s and warning /indicator lights 9
Tachometer (engine rev counter)
The tachometer indicates the engine RPM
(revolutions per minutes).
If engine RPM drops below 1,500, you should
downshift to the next lower gear. The red area
at the end of the scale ind icates maximum
perm iss ible engine RPM after the break-in pe­
riod . Before reaching th is area, move these­
lector lever to posit ion "A (Automat ic opera­
tion) " or ease your foot off the accelerator
pedal.
(D Note
The tachomete r needle should only briefly
be in the red zone : you could damage your
engine! The beginning of the red zone var­
ies depending on the engine.
@ For the sake of the environment
Upshifting early saves fuel and reduces en­
gine noise.
Digital clock with date display
Your vehicle is equipped with a quartz con­
trolled digital clock.
Fig. 4 Instr um ent cluster w ith t he digital clock
To set the hour
• Pull the knob (hour display flashes) and turn
it to the left or right.
To set the minutes
• Pull the knob as many times as necessary
until the minute display flashes.
• Turn the knob to the left or right.
To set the date
• Pull the knob as many times as necessary
until the day, month or year disp lay flashes.
• Tur n the knob to the left or right.
To hide or display the date
• Pull the knob as many times as necessary
until the date disp lay flashes.
• Turn the knob to the left or right.
When the date display stops blinking, this means the time and date have been success­
fully stored.
With the ign it ion off, pushing or pu lling the
Set/Check button
c::> page 8, fig. 3 o n the display field lighting for a few seconds.
Engine coolant temperature gauge
The eng ine coolant gauge c::> page 8, fig. 3 ®
only works when the ignition is on. To prevent
damage to your engine, please note the fol­
lowing important points.
Engine cold
As long as the needle remains at the bottom
of the gauge, the engine still has not reached its operating temperature. Avoid high engine
speeds, heavy engine loads and heavy throt­
tle.
Normal temperature
When the engine has reached its operating
temperature, the needle will move into the
midd le of the gauge and remain there. If the
engine is working hard at high outside tem­
peratures, the needle may turn further to the
right. This is no cause for concern as long as
the . warning light in the instrument cluster
does not illuminate.
When the. warning light starts to flash,
this can mean one of two things: either the
coolant
temperature is too high, or the cool-
ant
level is too low c::> page 15. IJJJ,

10 Instrum ents a nd warning /indic ato r li ghts
& WARNING
-Always observe the warning in
¢ page 172, Working in the engine
compartment
before open ing the engine
compartment lid and checking the en­
gine coo lant level.
- Never open the engine compartment lid
if you see or hear steam, or if you see en­
gine coo lant dr ipping from the eng ine
compartment. You could bur n yourse lf.
Let the engine coo l
off first until you can
no longer see or hear steam or coolant
escaping .
CD Note
- Mounting additional lights or ac cesso ries
in front of the air inlets reduces the cool­
ing effect of the radiator . At high outside
temperatures or high engine load, the
engine could overheat.
- The front spoi ler has been designed to
proper ly distribute the cooling air when
the vehicle is moving. If the spoiler is
damaged, th is could reduce the cooling
effect and the engine could then over­
heat. Ask your authorized Aud i dea le r fo r
ass istance.
Fuel gauge
The fuel ga uge works only when the ignition is
on. When the needle reaches the red area, the
warning light in the instrument cluster will i l­
luminate ¢
page 18 lil]. Tim e to r efu el!
CD Note
Never run the tank completely d ry! An ir­
regular supply of fue l can cause engine
misfiring and fuel could enter into the ex­
haust system . The catalyt ic converter
co uld then overheat and be damaged. Speedometer with odometer
The
speedometer shows you the vehicle
speed, and the odometer shows you how
many miles (kilometers) you have driven.
1S3.9
miles S2YY
F ig . S Speedometer close-up: odometer display
The distance driven is shown in m iles (USA
models) or in kilometers (Canada mode ls) .
Lower odomet er
The lower odomete r shows the tota l number
of miles (kilometers) driven.
Upper odometer (trip odometer )
The upper odometer shows the total number of miles (kilometers) driven s ince you last re­
set the odometer back to zero. You can use
t hi s odometer when you want to keep track of
how many m iles (kilometers) yo u have driven
f o r a si ngle tr ip or e rrand. The last dig it ind i­
cates 1/10 of a mile (100 meters). Yo u can set
the trip odometer back to zero by pressing the reset button ¢
fig. 5.
With the ignit ion off, pushi ng of the Set/
Check button
~ page 8 , fig . 3 0 can turn on
the display fie ld lighting for a few seconds.
Malfunction message
If there is a malfunct ion somewhere in the in­
strument cluster, dEF will appea r in the trip
odometer and w ill s tay on. Co ntact your au ­
thorized Audi dea ler to have the prob lem cor­
rected .
Immobilizer
When the ignition is sw itched on, the data on
the ignition key are scanned automatic ally. .,..

Instrument s and warnin g/indic ator ligh ts 11
If an unau thorized key was used , SAFE is dis ­
p layed continuously in the odometer display
field. The vehicle cannot be operated
<=:> page 29.
Voltmeter display
The voltmeter shows the voltage in the vehi­
cle electrical system .
If the reading drops be ­
low 12 volts with the engine running, you
should have the power supply (batte ry and
generator) inspected by an a uthorized Audi
dealer .
(D Tips
Voltage can drop be low 8 vo lts when you
start the engine.
Warning/indicator lights
Description
The indicato r lights in the inst rument cluster
b link or t urn on. They indicate functions o r
mal funct ions
c:> &. .
Messages may appear with some indicator
lights. The messages turn
off after a short
time. To d isp lay a message aga in, p ress the
Se t/Check button
c:> page 8, fig. 3 (J). If there
is more than one malfunction , the indicator
lights will turn on one after the other for ap ­
proximately two seconds each.
Some ind icators lights in the disp lay can turn
on in several colors.
,8. WARNING
- Failure to heed warning lights and other
important vehicle information may result
in serious personal injury or vehicle dam­
age .
- Whenever sta lled or stopped for repair,
move the vehicle a safe distance
off the
road, stop the engine, and turn on the
emergency flasher
c:> page 48 .
-The engine compartment of any motor
vehicle is a potentially hazardous area . Before you check anything in the engine
compartment, stop the engine and let it
coo l down. Always exercise extreme cau­
tion when working under the hood
c:> page 172, Working in the engine
compartment
(D Tips
Malfunctions or faults will be ident ified ei­
ther with a red symbol (priority 1 -Dan­
ger!) or with a yellow symbol (priority 2 -
Warning) .
Overview
Some indicator lights turn on briefly to check
the function o f that system whe n you swi tch
the ignition on. These systems are marked
with a./ in the follow ing tab les. If one of
these indicator lights does not turn on, ther e
is a ma lf u nction in that system.
Red indicator lights
Red symbo ls indicate a prior ity ma lf u nction -
Danger!
- Pull
off th e road.
- Stop the vehicle .
-T urn
off the engine.
- Check the malfunctioning system. Contact
your au thorized Audi dealer or a qualified
workshop for assistance .
-USA mod els: Mal function in the
brake system
c:> page 13
Canada models: Malfunction in the
b rake sys tem
c:> page 13
USA models: A irbag system./
<=:> page 14
Canada models: Airbag system ./
<=:>page 14
Safety be lt
<=:> page 14
Generator ./
<=:>page 14

16 Instruments and warning/indicator lights
can switch the ignition off and then on to
switch the ESC on again. The system is func­
tioning comp letely when the indicator lamp
switches
off.
If the 11 indicator lamp illuminates, the ESC
was switched
off with the [ID button.
Stabilization program and ABS fault! See
owner's manual
If the G1 ind icator lamp and the Ci] ABS indi­
cator lamp illuminate and the driver message
appears, the ABS or electronic differential lock
is ma lfunction ing. This also interrupts the
ESC. The brakes sti ll function with their nor­
mal power, but ABS is not active.
Drive to you r authorized Audi dealer immedi­
ately to have the mal func tion corrected.
For more informat io n about the ESC
¢page 144.
ABS/( (§) Anti-lock brake system
This warning/indicator light monitors the ABS
and the electronic differential lock (EDL).
The warning/ind icator light fl!B (USA mod­
els)
;tlJ (Canada models) will come on for a
few seconds when the ignit ion is switched on .
The light will go out after an automatic check
sequen ce is completed.
There is a malfunction in the ABS when:
- The warning/indicator light does not illumi­
nate whe n you switch the ign ition on .
- The warning/indicator light does not go out
after a few seconds .
- The warning/indicator light illuminates
wh ile driving .
The ESC indicator light a lso illuminates if
there is a malfunction in the ABS . The mes­
sage
Stabilization program and ABS: fault!
See owner's manual
also appears in the in­
strument cluster display and a warning tone
sounds .
The brake system will still respond even
without the assistance of the ABS system.
See your authorized Audi dealer as soon as possible to restore full braking performance.
For
more information regarding the ABS
¢page 144.
Malfunction in the brake system
If the brake warning light¢ page 13 and the
ABS wa rning illum inate
together there may be
a mal function in the ABS, and there may also
be a malfunction in the brake system itself
¢ .&.. The ABS will not work and you will no­
tice a change in braking response and per­
formance.
In the event of a malfunction in the brake
system
the warning/indicator light 1111
(U SA models)/ . (Canada models) in the in­
strument cluster flashes¢
page 13.
Malfunction in the electronic differential
lock
(EDL)
The EDL works together w ith the ABS. The
ABS warning light will come on if there is a malfunction in the EDL system ¢
page 144.
See your author ized Audi dealer as soon as
poss ible.
_& WARNING
- If the~ (USA models)/Ci] (Canada
models) warning light does not go out,
or if it comes on whi le driving, the ABS
system is not working properly. The vehi-
cle can then be stopped only with the
standard brakes (without ABS). You w ill
not have the protect ion ABS provides.
Contact your Audi dea ler as soon as pos·
sible.
- USA models: If the 1111 warning light,
the
J$) warning light and the fl!B warn­
ing light come on together, the rear
wheels could lock up first under hard
b rak ing. Rear wheel lock-up can cause
loss of vehicle control and an accident.
Have your vehicle repaired immediately
by your authorized A udi dealer or a quali­
fied workshop . Drive slow ly and avoid
sudden, hard brake applications.
-Canada models: If the brake warning
light ., the
DJ warning light and the
-
ABS warning light Ci] come on together, ~

Instrument s and warnin g/indic ator ligh ts 17
the rear wheels could lock up first under
hard braking. Rear wheel lock-up can
cause loss of vehicle control and an acci­
dent . Have your vehicle repaired immed i­
ately by your authorized Audi dealer or a
qualified workshop. Dr ive slowly and
avo id sudden, hard brake applicat ions.
(0 ) Worn brake pads
IJ Che ck brake pad s!
If the warn ing light illum inates, immediately
contact your author ized Audi dealer or quali­
fied workshop to have all bra ke pads inspect­
ed. O n USA models the wa rning lig ht
IJ
comes on togethe r wi th the warn ing light
1111 . Both sets of brake pads on an axle
must always be replaced at the same time .
& WARNING
Driving with bad brakes can cause a colli­
sion and serious personal injury.
- If the wa rning light IJ and the warning
l ight
11111
) w ith the message B rake
pads !
comes on in the instrument cluster
display, immediately contact your au­
thorized Aud i deale r or qualified work­
shop to have all brake pads checked or replaced if necessary .
EPC Electronic power control
This warning/indicator light monitors the
electronic power control .
The~ warn ing/ indicator light (Electron ic
Power Control) illuminates when you switch
on the ignition as a function check .
(D) Tips
If this warning/indicator light ill uminates
while you are dr iving, then there is a mal­
function in the engine electron ics . Have
the malfunction co rrected as soon as pos­
sible by you r authorized Aud i dea le r or
qualified workshop.
1) - : USA mod els on ly
-
~ Malfunction Indicator Lamp (MIL)
T he Ma lfunction Indi cato r Lamp ( MIL) is pa rt
of the On-Board Diagnos tic (OBD II) system .
T he symbo l
fl lights up when the ign ition is
turned on and will turn off after the eng ine
has started and has settled at constant id le
speed . This indicates that the MIL is work ing
properly.
T he warning lig ht ill uminates when there is a
malfunction in the engine electronic system .
Contact your a uthori zed Aud i dea ler and have
the malfunction corrected.
An improperly clo sed fuel filler cap may al so
cause the MIL l ight to illum inate
¢ page 169.
For more information ¢ page 26 .
!7, Engine speed limitation
Ma ximum 6000 RPM
T he eng ine speed is automatically limited to
6 000 RP M. T his pro tects the engine fr om
overheating .
T he eng ine speed limitation
lll deact ivates
once the eng ine is no longe r in t he cr itica l
tempe rature range and you have released the
acce le rator pedal once.
(D Tips
When co ld, the engine speed is l imited to
6000 R PM (w ith the
VlO engine) or
7000 R PM (with the VB engine) to p rotect
the engine. The limit is deactivated once
the oil temperature r ises above 140 °F
(60 °C) and the engine is at operating tem­
perature .
~ .. Checking the engine oil level
II Please add ma x. 1 qt of engine oil!
If the II symbo l comes on, add 1 quart (1 li ­
ter) of oil at the next opportunity
¢ page 180.

24 Driver information system
Selecting settings
The Driver Information System settings are
menu-guided .
Fig. 14 Display: Menu Settings, comp uter selected
(page 1)
• Press the I RESET I button. The Start menu
appears
c:> fig. 14.
• Press the rocker switch until Set is dis ­
played .
• Press the
I RESE T I button . A ll the menus ap­
pear.
• Press the rocke r swi tch until the desired line
is highlighted (cursor)
c:> fig. 14.
• Press the I RESET I button.
• If necessary, scroll by se lecting and activat­
ing the symbol for "Next page" or "Previous
page".
When you have selected the Computer menu
and activated it by pressing the
I RESET I but­
ton, two computer levels appear (computer
1
and computer 2). Now you have to select the
level you want using the rocker switch and ac­
tivate it w ith the
I RESET I button.
Service interval display
The service interval display reminds you when
your next service is due.
Fig. 15 Section of ins tru ment cl uster: Service interval
d isplay
The schedule for the next oi l change or inspec­
tion is ca lculated automatically and displayed
accordingly. The disp lay works in two stages:
Service reminder
30 days before the next service is due, a serv­
ice reminder appears in the display when you
turn on the ignition.
After about
5 seconds the display switches
back to normal. The distance and time re­
maining are updated each time the ignition is
turned on until the date due for service is
reached.
Service due
When the due date for service is reached, the
message
Service due! appears in the instru­
ment cluster immed iate ly after you turn on
the ignit ion . Additionally, a warning tone
sounds. After about 5 seconds the display
switches back to normal.
Calling up the service schedules
If or when an oil change or inspection is due,
can be shown in the instrument cluster by se­
lecting the service interva l display. Select
Check > Service > Oil change or Service by us­
ing the
I RES ET I bu tton and the rocker switch
c:> page 23, fig. 12.
Resetting the service interval display
Your authorized Audi dea ler will reset the cor­
responding service schedule after performing .,.