176 Check ing and filling
Audi Customer Relations at 1 (800) 822 -2834
or visit our web site at www .audiusa .com or
www.audicanada .ca. Here you will a lso find a
current lis t of oils (manufacturers, brand
names etc.) that conform to Audi o il standard
vw 502 00 .
Changing the engine oil
The engine oil and o il filter must be changed
according to the mi leage (ki lometers) and
time interva ls specified in your vehicle's War
ranty
& Maintenance booklet . Do not exceed
these intervals -harmful depos its from old
engine o il can reduce engine performance and
can lead to expensive engine repairs .
C hanging the o il at the recommended inter
va ls is so very important because the lubricat
ing properties of oi l decrease gradually during
normal vehicle use. If you are not sure when
you have your o il changed, ask your author
ized A udi Service Advisor .
Under some circumstances the engine o il
should even be changed more frequently .
C hange o il mo re often if you dr ive mostly
short d istances , operate the vehicle in dusty
a reas or mostly under s top-and -go traffic con
d itions , or when yo u use your veh icle whe re
temperatures stay below free zing point fo r
l ong periods .
D etergent add it ives i n the o il w ill ma ke fresh
oil look dark after the eng ine has been run
n ing fo r a shor t time . This is no rma l and is not
a reason to change the oi l more often than
recommended.
Damage or malfun ction s due t o lack of
maintenance
I t is essential that you change your oil at the
r ecommended in te rvals using only engine o il
th at compl ies wi th A udi oil st andard VW 502
00. Yo ur Limited New Veh icle War ran ty does
not cover damage or malfunctions due to fa il
ure to follow recommended maintenance and
use requ irements as set forth in the A udi
Owner's Manual and Warranty
& Ma intenance
bookle t. Your authori zed Audi dealer will have
to deny warranty coverage un less you present to the dealer proof in the form of Service o
r
Repair Orde rs that all sched uled maintenance
was per formed in a time ly manner .
Engine oil specifications (10-cyl.
engine)
App lies to vehicles: wit h IO -cy linder -engine
The engine in your Audi needs the right kind
of oil.
The engine in your A udi is a sophisticated
powerplant that was built to exact ing spec ifi
cations . T hi s eng ine needs the right k ind of
engi ne oil that meets specifications regarding
quality and v iscosity so that it can run
smoothly and reliably. Choosing the rig ht o il
and changing oil within the t ime and mileage
in tervals p rin ted in you r vehicle's Wa rra nty
&
Mainten ance booklet matte rs a lot more to
day than it did years ago . Aud i has deve loped
a specia l quality sta ndard for engine oi l th at
will help assure that your vehicle's engine wi ll
get the lubr ication it needs for proper opera
t ion.
Modern engine lubrication has ta ken a quan
tum leap in the last few years . Many synthetic
o ils available today provide better engine lu
brication that can outlast tradit ional petrole
um-based oils, making them a sma rt cho ice
for use throughout the life of your Audi .
Whether you use synthetic o r pet ro le um
based engine oil, the oil that you use must
conform to Aud i's oil quality standards
VW 50 1 01 or VW SOS 00 and m ust have a
viscosity of SAE lOW-60 to help keep your ve
hicle's engine running smoo thly a nd he lp p re
ven t the forma tion of h armf ul deposits,
some times called "s ludge," tha t over t ime can
l ead to expensive repairs.
At the time of pr int ing, engi ne oils ava ilable in
t h e U.S. and Canada th at meet the exac ting
spec ifica tions of Audi oil s tanda rds
VW 50 1 01 or VW SOS 00 with the viscosity of
SAE lOW-60 are synthetic engine oils. This
does not mean, however, that every synthet ic
engine oil will meet Audi oil standards
1111>
VW 501 01 or VW SOS 00. So always be sure
that you use an approved oil.
To help preve nt the formation of harmful de
posits use only oi l with the fo ll ow ing spec ifi
cations printed on the oil containe r:
Audi oil standard s VW 501 01 or VW 505 00
and must have the v iscosity of SAE l0W-60 .
Oil conta iner labe ls may ca rry the specif ica
tion s ingly or in comb inat ion with other des ig
nations and oil qua lity standards .
Viscosity
Eng ine oi ls are graded according to the ir vis
cosity. The prope r viscosi ty grade o il for your
engine depends on climactic or seasonal con
ditions where you drive. Yo u m ust use oil with
a viscos ity grade of SAE lOW-60 all tempera
ture ranges for norma l dr iv ing cond itions .
B ecause engine oil that meets the A udi oil
standard may not be available everywhere
when yo u need it, we strongly recommend
that you always carry with you an extra q uart
(liter) of o il that expressly conforms to the
VW 501 01 or VW SOS 00 specifications
which must have the viscosity of SAE lOW-60,
in case yo u have to top
off th e oil whi le on the
r oad.
Only if the level of the oi l is at o r below the
minimum mark on t he oil dipstic k -and no oil
that express ly co nforms to Aud i oil
VW 501 01 or VW SOS 00 spec ifications
whi ch mus t have the vis cosity o f SA E lOW-60
i s available -may you top
off w ith a hig h qua li
ty engine oil, prefe rably sy nthetic -based, that
meets ACEA A3 or API SM specifications . How
eve r, d uring the entire t ime between oil
change inte rva ls, never top
off with more than
a tota l of 1 qt/liter engine o il that does not
conform to Audi o il specifications VW 501 01
or VW SOS 00 w ith the viscosity of SAE
lOW-60 .
For more informat ion about engine oil that
has been approved for your vehicle, please
contact either your author ized Audi dealer or
Aud i Customer Relations at 1 (800) 822-2834
Checkin g and fillin g 177
or vis it o ur web site at www .audiusa .com or
www.au dicanada.ca . Here you wi ll also fi nd a
current list of oi ls (manufacturers, bran d
names etc.) that conform to Audi oil stand
ards VW 501 01 or VW 505 00 w ith the vis
cosity of SA E lOW -60 .
Changing the engine oil
The eng ine o il and o il fi lter m ust be changed
according to t he mileage (ki lometers) and
time intervals specified i n your ve hicle's War
ranty
& Ma intenance booklet . Do not exceed
these interva ls - harmful deposits from old
engine oil can red uce engine performance and
can lead to expensive eng ine repairs.
Changi ng the oil at the recommended inter
vals is so very important because the l ubricat
i ng proper ties of oil decrease gradually d uring
no rma l veh icle use . If you a re not s ure when
you have your o il cha nged, ask your author
ized Audi Serv ice Adv isor.
Under some circumstances the engine oil
sho uld eve n be changed more frequent ly .
Change oil mo re often if you dr ive most ly
sho rt distances, operate the ve hicle in dusty
areas o r most ly under stop-and -go traff ic con
di tions, o r when you use your veh icle where
temperatures s tay be low freezing point for
l ong pe riods .
Dete rgen t additive s in the oil will make fres h
o il look d ark after the engine has been ru n
ning for a sho rt time. This is no rmal and is not
a reaso n to change the oil more often t han
recommended.
Damage or malfunctions due to la ck of
maintenance
It is essential that you chang e you r o il at the
r ecommended in tervals usi ng on ly engi ne oil
that complies with Audi o il stand ards
VW 50 1 01 or VW SOS 00 an d must have the
viscosity of SAE lOW -60. Yo ur Limited New
Vehicle Warranty does not cover damage or
malfunctions due to failure to follow recom
mended maintenance and use requ irements
as se t forth in the Audi Owner's Manual and
Warranty
& Ma intenance booklet . You r I),
•
•
1 78 Che cking and filling
authorized Audi dealer will have to deny war
ranty cov erage un less you present to the dea l
er proof in the form of Serv ice o r Repair Or
ders tha t all sched uled maintena nce was per
f ormed in a t imely manner .
Engine oil consumption
T he engine in your vehicle depends on an ade
quate amoun t of oil to lubricate and cool all
of its moving par ts.
In order to provide effective l ubrication and
cooling of internal engine components, a ll in
ternal comb ustion eng ines consume a certa in
amount of o il. O il consumption var ies from
engine to eng ine and may c hange significa ntly
over the life of the eng ine . T ypically, eng ines
with a specifie d break-in per iod (see
c::> p oge 153) consume more oil during the
b reak-in per io d t han they co nsume after oil
consumption has sta bilized.
Unde r no rma l conditions, the rate of oil con
sum ption depends on the qu ality and vi scosity
of the oi l, the R PM ( revo lutions per m inute) at
which t he engine is ope rated, the ambient
temperature and road cond itio ns. Furthe r fac
tors are the amount of o il d ilution from water
condensation or fuel residue and the ox ida
ti on level of the oi l. As any engine is subject to
wear as mileage bu ilds up , the oil consump
tion may increase over t ime until replacement
of worn componen ts may become necessary.
W ith all these variables com ing into play, no
standa rd rate of o il consumption can be es
tablished or specif ied . T he re is no alternative
to regular and frequent checking of the oil lev
e l, see
Note .
If the ye llow eng ine o il level warning symbol
i n t he inst rument cluster
1\1 lights up, you
should check the o il l evel as soon as possibl e
c::> page 178. Top off the oil at you r earliest
conven ie nc e
c::>page 180.
_& WARNING
Before yo u check any thin g in t he engine
compartment , always read and hee d all
-
WAR NIN GS c::> & in Working in the engine
compartment on page 173.
(D Note
D riving wit h an insufficient o il level is like
l y to cause severe dama ge to the e ngine.
(D Tips
- The oil pressure warning display. is
not an indicator of the oil level. Do not
rely on it. Instead, check the oil level in
your engine at regular intervals , pref
erably each time you refuel, and always
before going on a long trip .
- If
you have t he impression yo ur engine
cons umes excessive amounts of o il, we
recommend that you consu lt your Aud i
deale r to have the cause of your concer n
prope rly diagnosed . K eep in m ind that
th e accu rat e meas urement of o il con
s u m ptio n re quires grea t care and may
t a ke some time. Y our Audi de aler h as i n
st ru ctio ns abou t how to measure oil con
sumption acc urately .
Checking the engine oil level
Applies to vehicles: with manual transmiss ion
Fig . 1 38 In st ru men t cl uste r: E ng in e oi l te m pe ratu re
d isp lay
Fig. 139 M arkers on o il dip stick
Before you check anything in the engine com
partment,
always read and heed all WARN
INGS.
Determining oil level
... Warm up the engine by driv ing until the in
strument cluster display shows an oil tem
perature of
210 °F (100 °C) to 230 °F
(110 °C) 9fig. 138.
... Park your vehicle so that it is horizontally
level.
... Allow the warm eng ine to run for about two
minutes at id le.
... Shut the engine off and wait two m inutes .
... Check the oil level on the eng ine o il dipstick
9fig. 139.
Oil level within range@
... Do not add oil.
Oil level within range@
... Add 1 quart (1 liter) of oil. Afterwords, the
oi l level shou ld be within range
G).
Depending on the way the vehicle is driven
and the operating conditions, oil consumption
can be up to 1 quart per
600 miles ( 1 liter per
1,000 km). Consumption may be higher with
in the first
3,000 miles (5,000 km).
Checking the engine oil level
A ppl ies to vehicles: with S tro nic
Fig. 140 Inst rument cl uster: Engine o il temperature
dis play
Checking and filling 179
Fig . 141 Markers on oil dip stick
Before you check anyth ing in the eng ine com
partment,
always read and heed all WARN
INGS .
Determining oil level
... Warm up the engine by driving until the in
strument cluster display shows an oil tem
perature of
210 °F (100 °() to 230 °F
(110 °() 9 fig. 140 .
.,. Park your vehicle so that it is horizon tally
level.
... Allow the warm engine to run for about two
minutes at idle .
... Shut the eng ine off and wa it two minutes .
... Remove the design cover.
... Unscrew the cap
"t!:7: to the eng ine o il filling
hole
¢ page 174, fig. 137.
... Check the oil level on the engine oil d ipstick
¢fig. 141.
To check the oil level, the dipstick must be
inserted completely and the bayonet catch
must be locked (audible locking, turn all the
way to the stop).
Oil level within range@
... Do not add oil.
Oil level within range@
... Add 1 quart (1 liter) o f oil. Afterwards, the
oil leve l should be within range
G).
Depend ing on the way the vehicle is dr iven
and the operat ing conditions, oil consumption
can be up to
1 quart per 600 miles (1 liter per
1,000 km). Consumption may be higher with
in the first
3,000 mi les (5,000 km).
CD Note
-The oil leve l mus t not be ab ove range
¢ page 179 , fig. 141 G) -danger of con
verter or engine damage! Contact an au
thorized Audi dealer to draw off oil, if necessary .
- Audi does not recommend the use of oil
additives. They may damage the engine
and adversely affect your New Vehicle
Warranty .
@ For the sake of the environment
-Under no circumstances can the o il come
i n contact with the sewage network or
the soil.
- Observe and follow lega l regu lations
when d isposing of empty oil containers.
Engine cooling system
Coolant
The engine coolant performs two functions: it
keeps the engine from overheating and it pro tects the engine from freezing in the winter.
The cooling system is sea led and generally re
q ui res lit tle at ten tion.
The cooling system has been filled at the fac
tory with a pe rma nent coolant which does not
need to be changed. The coolant consists of a
mix ture o f wa ter and the m anu fa ctu rer 's g ly
col -based coolant addit ive Gl3 antifreeze
with anticorrosion additives (50% for USA mod els; 60% for Canadian models) . This mix
ture both assures the necessary frost protec
tion and protects metal components i n the
engine's cooling system from corrosion and
scaling .
It also raises the bo iling po int of the
coolant.
Do not reduce the concentration of the coo l
ant in the summer by adding plain water.
The
proportion of coolant addit ive must b e at
lea st 50% but not more than 60 %
to main
tain antifree ze protection and cooling efficie n
cy.
If t he cool ant frost pro tect io n is too low,
the coo lant cou ld freeze and damage the veh i
cle heating and engine cooling system.
Checkin g and fillin g 181
For year -round driving, antifreeze is added at
the factory for temperatures down to:
- -31°F(-35°C)USA
- -40 °F ( -40 °C) Canada.
.8, WARNING
Before you check anythi ng i n the engi ne
com partmen t, a lways re ad and heed al l
WA RNIN GS
q .&. in Working in the engine
compartment on page 173 .
-
CD Note
- Before wi nte r sets in, have the coo lant
checke d to see if the cool ant a ddi tive in
yo ur vehicle is sufficient to meet the cli
mate conditions . This is especia lly impor
tant if you live in a region where the win
ter is extreme ly cold. I f necessary, in
crease the proportion of coo lant add itive
to 60% .
- When adding coolant additive to your cooling system, remember :
- We re commend using o nly coola nt ad
di tive G l2++ or Gl3 (check the l abe l)
for your vehi cle. This coolan t additive is
ava ila ble at autho rize d Aud i dea le rs .
Othe r ty pes of antifreeze can sig nifi
cantly reduce corros ion protection. The
resu lting corrosion can cause a loss of
coolant and serio us engine damage.
- Do not add any type of rad iator leak seal
ant to yo ur vehicle 's engine coolant.
Add ing radiator repair flu id may adverse
ly affect the f unction and performance of
your cooling system and co uld resu lt in
damage not covered by you r New Vehicl e
Li mited War ran ty.
•
•
190 Tire s and wheel s
-Never mount used tires on yo ur vehicle if
yo u are not sure of their "previous histo
ry." Old used tires may have been dam
aged even though the damage cannot be
seen that can lead to sudden t ire failure
and loss of vehicle control.
- If you notice unusual vibration or if the
vehicle pulls to one side when driving, al
ways stop as soon as it is safe to do so
and check the wheels and tires for dam
age.
(D Note
Please note that summer and winter tires
are designed for the cond itions that are
Glossary of tire and loading terminology
Accessory weight
means the comb ined we ight (in excess of
those standard items which may be rep laced)
of au toma tic tra nsmission, power steer ing,
power brakes, power windows, power seats,
radio, and heater, to the extent that these
items are availab le as factory -installed equip
ment (whether installed or not) .
Aspect ratio
means the ratio of the he ight to the w idth of
the tire in percent . Numbers of 55 or lower in
dicate a low sidewall for improved steering re
sponse and better overall handling on dry pavement .
Bead
means the part of the ti re that is made of
steel wires, wrapped or reinforced by ply cords
and that is shaped to fit the rim.
Bead s eparation
means a b reakdown of the bond between
components in the bead.
Cord
means the strands forming the plies in the
tire . typ
ica l in those seasons . Audi recommends
using winter tires during the winter
months . Low temperatures signif icant ly
decrease the e lasticity of summer tires,
which affects tract ion and brak ing ability.
If summer tires are used in very co ld tem
peratures, cracks ca n form on the tread
bars, res ulting in permanent tire damage
that can cause loud driving no ise and un
balan ced t ires. Audi is not responsible for
th is type of damage .
Cold tire inflation pre ssure
means the t ire p ressure recommended by the
vehicle manufacturer fo r a tire of a des ignated
s ize that has not bee n driven for more than a
coup le of miles (k ilometers) at low speeds in
the three hour period before the tire pressure
is measured or adjusted.
Curb weight
means the we ight of a motor ve hicle w ith
standard equipment including the max imum
capacity of fuel, oil, and coolant, air condi
tioning and additional weight of optiona l
equipment.
E x tra load tire
means a t ire designed to ope rate a t higher
loads and at highe r inflation p ressu res than
the corresponding standard tire. Extra load
tires my be identified as "XL", "xl", "EXTRA
LOAD", or "RF" on the sidewall.
Gross A xle Weight Rating ("GAWR ")
means the load -carry ing capacity of a s ingle
axle system , measured at the tire-ground in
terfaces.
Gr oss Vehicle Weight Rating ("GVWR ")
means the maximum total loaded we ight of
t h e vehi cle. .,.
and tires. A wheel must also be rebalanced
when a new tire is installed.
Incorrect wheel alignment
I nco rrect whee l alignment can cause exces
sive tire wea r, impair ing t he safety of the vehi
cle. If tires show excess ive wear, have the
wheel alignment checked by an authorized
Audi dealer or qualified workshop.
All-wheel d rive
Only the wheel/tire sizes specified by the
manufacturer may be used on vehicles wi th
all-wheel drive. For details see
<:!) page 149.
A WARNING
Sudden tire failure can lead to loss of con
tro l, a crash and serious persona l injury!
- Never drive a veh icle when the tread on
any t ire is worn down to the wear indica
tors.
- Worn tires are a safety hazard , they do
not grip well on wet roads and increase
your risk of"hydrop lan ing" and loss of
co ntrol.
- Always keep chemicals that can cause
tire damage, such as grease, oil, gasoline
and brake fl uid away from t ires.
- Tires age even if they are not being used
and can fail suddenly, especially at high
speeds. Tires that are more than 6 years
old can only be used in an emergency
and then with special care and at lower
speeds.
- Never mount used tires on yo ur vehicle if
you are not sure of their "previous histo
ry." Old used tires may have been dam
aged even though the damage cannot be
seen that can lead to s udden tire failure
and loss o f vehicle control.
Tires and wheels 199
New tires and replacing tires and wheels
New tires and wheels hove to be broken in .
Fig. 152 Tir e spec ificat io n codes on t he s idewall o f a
tire
No. De scription
CD Passenger car tire (where applicable)
@ Nomina l width of t ire in mill imeters
® Ratio of height to width (aspect ratio)
© Rad ia l
® Rim diameter code
® Load index and speed rating
(f) U.S. DOT tire identification number
® Aud i O rigina l tire
® Sever snow conditions
@ Tire p ly composi tion and mater ials used
@ Maximum load rating
@ T readwear, tracti on and temperature
grades
@ Maximum permissible inflation pres-
sure
The tires and rims are essentia l parts of the
vehicle 's design . The t ires and rims app roved
by A udi are spec ially matched to the charac
teristics of the vehicle and can ma ke a major
contr ibu tion to good road holding and safe .,.
•
Consumer Information
Warranty coverages
Your Audi is covered by the following war
ranties :
-New Vehicle Limited Warranty
- Limited Warranty Against Corrosion Perfo-
ration
- Emissions Control System Warranty
- Emissions Performance Warranty
- California Emissions Con trol Warranty (USA
vehicles only)
- California Emissions Performance Warranty
(USA vehicles only)
Detailed information regarding your warran
ties can be found in your
Warranty & Mainte
nance booklet .
Operating your vehicle
outside the U.S.A. or
Canada
Government regulations in the United States
and Canada require that automobiles meet
specific emission regulations and safety
standards. Therefore, veh icles built for the
U.S.A. and Canada differ from vehicles sold in
other countries .
If you p lan to take your vehicle outside the
continental limits of the United States or Can
ada, there is the possibility that:
- unleaded fuels for vehicles with cata lytic
converter may not be available;
- fuel may have a considerably lower octane
rating . Improper fuel may cause engine
damage ;
- service may be inadequate due to lack of
proper service facilities, tools or testing
equipment ;
- replacement parts may not be readily availa
ble.
- Navigation systems for vehicles built for the
U.S.A. and Canada will not necessari ly work
in Europe, and may not work in other coun
tries outside of North America.
Consumer Information 22 7
@ Note
Audi cannot be responsible for mechanical
damage that could result from inadequate
fuel, service or parts availab ility.
Audi Service Repair
Manuals and Literature
Audi Offic ial Factory Service Manuals and Lit
erature are published as soon as possible after
model introduction. Service Manuals and liter
atu re are availabl e to order from the Audi
T echnical Literature Ordering Center at:
https: //www.a udi.techliterature.com
Maintenance
' General
Your vehicle has been designed to help keep
maintenance requirements to a minimum.
However, a certain amount of regular mainte
nance is still necessary to assure your vehicle's
safety, economy and rel iability . For detailed
vehicle maintenance consult your Warranty
&
Maintenance booklet.
Under difficult operating conditions, for ex
ample at extremely low outside temperatures,
in very dusty regions, etc., some service work
shou ld be pe rformed between the intervals
specified. This applies particularly to:
- oil changes, and
- cleaning or replacing the air fi lter.
@ For the sake of the environment
By regu larly maintaining your vehicle, you
help make sure that emission standards
are maintained, thus min imizing adverse
effects on the environment.
Important considerations for you and
your vehicle
T he increasing use of electron ics, soph isticat
ed fuel injection and emission control sys
tems, and the generally increasing technica l
complexity of today's automobiles, have ..,_
•
•