2014 AUDI Q7 intervals

30 Driver in formation d ispl ay
(30 km/h to 240 km/h) . Settings can each be
adj usted in intervals of S mph (10 km/h) .
Auto Check Control
Introduction
The Auto-Check control monitors the function
of certain veh icle featu res and components . It
simply makes sure these features and compo­ nents are work ing proper ly . The Auto -Check
contro l wo rks as long as the ignition is on, as
well as whenever the vehicle is driven.
If a componen t is ma lf u nctioning or if the
n eed for an urgent repair has been detected,
this will appear in the instrument cluster dis­
p lay . You w ill a lso hear an audible warn ing
tone . The displays are co lor coded in e ither
red or yellow depending on their level of prior­
ity .
A red symbo l means
Dange r, a yellow symbo l
indic ates
Warning . In certain s ituations, in­
formation message for the dr iver appear in
addit ion to the red and yellow symbols.
Function te st : automat ic transmi ssion
The Auto -Check Control will automat ica lly
perform a test each time you switch on the ig­
n ition. With the selector lever in P or N, the
following message appears in the display :
When station ary apply brake pedal while se­
lecting gear
When you select a different gear (for exam ­
p le : R, D, etc.), the message will d isappear
and the Auto-Check function is d isplayed .
I f the re is a m alfu nction, then the malfunc­
tion message w ill appear about 15 seconds af ­
ter the yo u start the vehicle. At t he same time
you will hear a warning tone .
Driver information messages
Driver information messages are shown in the
instrument cluster display in addition to the
red and yellow symbols .
Fig. 24 Ins trume nt cl ust er: CHECK b utto n
For example, if the transmiss ion selec to r l ever
is not in the P position when the engine is
turned off, the following message appears :
Shift to P otherwise vehicle can roll away.
Door s do not l ock if you are not in P .
The ig nition key can only be removed with the
selector in this position . Th is and other mes­
sages are bro ugh t up if a func tion cannot be
carr ied out.
Driver messages and red symbols
If a red symbol appea rs in the display, a d river
message can be shown by pressing the
I CH ECK I button.
For example, the symbo l for a problem w ith
engine oil p ressure . appears in the d isp lay .
If you then p ress the
I CHECK I button , the fol­
lowing dr iver mess age appears in the display:
Switch off engine ! Oil pr essure too low
The driver message in the display goes out af­
ter about 5 seconds . The driver message can
be displayed again by briefly press ing the
I CH ECKi button.
Driver messages and yellow symbols
If a yellow symbol appears in the display, a
driver message is also displayed automatical-
~ ~

64 Clear vis ion
General information
The winds hield wipers and the w indshield
washer system operate only with the ignition
on.
During a temporary stop , e.g . at a t raff ic sig­
na l, the set wipe speed is automatically re­
duced by one stage.
The winds hield washer no zzles a re heated at
l ow temperatures when the ignition is on .
Removing w ate r droplet s
About 5 seconds after the wash cycle is com­
plete, the wiper system performs a single au ­
tomatic wipe cycle to remove any water drop­
l ets that remain on the windshield whi le dr iv ­
ing.
If you would like to deactivate this delayed
wipe cycle wh ile driving, you have to pull the
l eve r to pos ition ® again within 10 seconds
after this wipe cy cle.
Water droplet removal is reactivated after the
ignit ion is switched off and then on again .
Winter position
To speed up de -icing of the w indshield w ipers,
t hey move to the winter posi tion when the ig­
n ition is switched off and at an outside tem­
perature below 39
°F (4 °(). In this posit ion ,
the w indshield wipers are in an area on the
g lass w hich is reached by the a ir vents below
the glass. It is also easier to remove snow and
ice from the wi ndshield wipers in this posi­
tion .
The wipe rs leave the w inte r position, when
the ign ition is swi tc h ed on, if the winds hield
wiper lever is operated or the active rain sen­
sor reacts to moistu re.
Rain sensor
The rain senso r operates on ly in the inte rva l
wiper position . When it sta rts to ra in , the in­
terval wipe r mode is activated automati ca lly.
If the windshie ld w iper lever is in the inte rval
wipe posit ion w ith the ign ition switched off, the ra
in sensor is not activated until ve hicle
sp eed is above 4 mph (6 km/h).
T o red uce the sensi tivi ty of the rain senso r,
the switch @ mus t be moved down . T o in­
crease the sensitivity of the rain sensor, the
switch must be moved up.
T he higher the sensit iv ity se tt ing , the sooner
the windshie ld wipers react to moist ure on
the windshie ld . I nc reased sensitivity is sig­
naled by the windshie ld wipers making a sin­
gle pass over the windshield.
T he rain sensor w iper intervals depend on the
sensitivity setting as well as vehicle speed.
D uring brief stops, wiper motio n will adj ust in
relat ion to the amount o f rain on the w ind­
shield .
A WARNING
-W iper blades are crucial for safe driving!
O nl y when they are i n good co ndit io n are
they able to clear the windows prope rly
to p rov ide uncompromised vis ib ility.
Wo rn o r damaged wipe r blades are a
safety hazard ~
page 67, Replacing
windshield wiper blades!
- T he rain sen so r is only designed to assist
a nd suppor t the driver.
It rem ains enti re­
ly the d river 's responsibility to monitor
outside weathe r conditions and to man­
ually activate the wipe rs as soon as rain
or driz zle reduces visibility through the
windshie ld.
(D Note
In freezing or near freezing conditions:
- Always check that the w iper b lades are
not frozen to the g lass before you turn
the wipe rs on . Loosen a wiper blade
wh ich is frozen in place before operating
the wipers to prevent damage to the
w iper blade or the wiper motor.
- Do not use the w ipers to clear a frosted
w indow. Us ing the wipers as a conven­
ient ice scrape r will destroy the wiper
blades .

116 Adapti ve crui se control
-Never drive with you r foot underneath
t h e brake pedal.
- Always read and heed the information
and WARNINGS
c:;, .&. in Description on
page 113.
A WARNING
- Never rely on the distance control fea­
ture of ACC alone to prevent rear-end col­
lisions . Always be prepared to brake and
take evasive action to avoid collisions and other acc ident situations.
- Never allow the clos ing speed between
yo u and other vehicles to be so h igh that
the adaptive c ruise control may not be
able to slow your vehi cle safe ly. If clos ­
ing speed is too high, you m ust app ly the
brakes yourself to reduce the risk of a
rear-end crash.
(D Tips
Please note that t he amo un t of a ccelera­
tion the adapt ive cr uise control uses de­
pends on the Distance setting selected .
DISTANCE 1 g ives you acce lerat ion that is
dynamic and sporty. DISTANCE 4, on the
other hand, gives more moderate acce lera­
tion. For more information about the time
intervals
c:;, page 118 , How is the distance
(time interval) set? .
-Please note that if the adaptive cruise
control has begun braking the vehicle
and the d river chooses to brake the vehi­
cle add itiona lly, t he b rakes may fee l
"h ard". This is simply due to the pressure
b uild- up of the initial b raking.
- Adaptive cruise control is sw itched off af­
te r pressing the footbrake. The speed
saved u p this poin t can be resumed. To
res ume the saved speed, release the
b rake pedal and p ull th e control leve r to­
ward you
c:;, page 118 , Turning adaptive
cruise control off temporarily .
Switching the system on and off
Applies to vehicles: with adaptive cruise contro l
Fig. 128 Control lever: Sw itching on and off
S w itching the sy stem on
.,. Pull the lever to position © c:;, fig. 128.
Switching the system off
.,. Pres s the lever to posit ion @ (latched).
How is the speed stored?
Applies to vehicles: wit h adaptive cruise contro l
,' ts ~:_" ';;;", ' , E Sl'EEO CANCELU
. T ,0. -ON ... . RESUME~
Fig. 1 29 Co ntrol lever: Storing s peed
With the sy stem switched on the speed is
stored as follows:
• Dr ive at the speed you want .
.,. Press the
ISE TI button c:;, fig. 129 to store
the desired speed.
After the
ISE TI button is re leased, the current
speed is stored and maintained . If you are
driv ing at a speed below 20 mph (30 km/ h),
the minimum speed setting of 20 mph
(30 km/h) will be set .
The saved speed is now shown in the LED d is­
play in the speedometer by one or two illumi­
nated red light d iodes
c::> page 121. At the
same time, the saved speed is also shown for ..,.

122 Adaptive cruise control
select information from the trip computer,
navigation system* or adaptive cruise control.
@ Vehicle symbol
@ Distance
© Status
@Vehicle symbol
The vehicle symbol indicates whether the sys­
tem has detected an object traveling in front .
-Vehicle outline: Open road, no vehicle
ahead.
- White vehicle: A vehicle is detected ahead.
-Red vehicle : Request for driver to assume
control.
@ Distance
Using the arrows and scale, you can detect
how far it is to the vehicle in front of you.
- Open road: No arrow appears when the ve­
hicle is on an open road and there is no vehi­
cle ahead.
- Driving in traffic: If a vehicle is detected
ahead, the arrow moves on the scale. The
green area represents the distance set.
When approach ing slow ly, the arrow moves
from the
gray zone to the green zone on the
scale .
-Driver intervention prompt : When ap­
proaching rap idly, the arrow serves as an
early warning signal. If the d istance select­
ed is exceeded or possibly not reached, the
arrow moves into the
red zone on the scale.
In certa in driving situations, you as the driv­
er w ill have to take action
c::> page 124, Driv­
er intervention prompt.
@Status
- The text ACC: Off appears in white letters
when adaptive cruise control is turned off.
- The text
ACC: Standby appears in white let­
ters when the system is turned on but no
desired speed has been set.
- The text
ACC: override appears in white let­
te rs when you exceed the desired speed by
acce lerat ing. - The text
DI
STANCE! appears in red letters
when the interva l to a vehicle traveling
ahead is too short and you have to slow your
veh icle additionally with the foot brake.
- The text messages
DISTANCE 1 to DIS­
TANCE
4 appear in green letters to indicate
the t ime interval you have set and adapt ive
cruise control is in management mode.
- If the driving program "standard" is re­
placed by "comfort" or "dynam ic" using the
MMI , the above text message is supple­
mented by an appropriate prompt, e.g.
DIS­
TANCE
1 -dyn .
System status indicator
Applies to vehicles : wi th adap tive c ruise contro l
The text messages and symbols shown in this
area of the display are not displayed perma­
nently.
Fig. 137 System status indicator
Time intervals (such as.::::::, ____ .::::::,)
The different symbols for the time intervals
(distance) appear if you change the settings
c::>fig. 137.
Three white dots ... appear if a setting cannot
be made w ith the operating lever. The follow­
ing are possible reasons
- If you pull the cont ro l lever towards you to
resume speed but no requested speed was
set.
- If you push the lever up to increase (or down
to reduce) speed when no speed has been
set previously.
- If you push the lever up to increase (or down
to red uce) speed and this speed is outs ide
Ill>

Checking and fillin g 259
Engine compartment
These are the most important items that you can check .
Fig. 2 41 Typ ical layout for conta iners, e ngin e oi l dipst ick and engine oi l fille r cap
(D Windshield/headlight washer
t .
(~) con ainer ,.,., ....... ... .. .. .
@ Coolant expansion tank (-L) .. .
®
@
®
®
(f)
Eng ine oi l filler cap ("1:::r.) ..... •
Engine oi l dipstick .. .... .... .
Brake fluid reservo ir
(0)) ..... .
Power stee ring reservoir ... .. .
Jump start connector(+) under 272
265
263
262
267
228
a cover, (-) with hex head screw 270, 307
The pos ition of the engine o il filling hole and
the eng ine oil dipstick¢
fig. 241 (position @
and @) can
vary according to the type of en­
g ine.
A WARNING
Before you check anything in the engine
compartment, always read and heed all
WARN INGS ¢.&.
in Working in the engine
compartment on page 257.
Engine oil
Engine oil specifications
The engine in your Audi needs the right kind
of oil.
The engine in your Audi is a sophisticated
powerplant that was built to exacting spec ifi­
cations . Th is eng ine needs the right k ind of
engine oil that meets specifications regardi ng
quality and viscosity so that it can run
smooth ly and reliab ly. Choosing the right o il
and changing oil within the time and mileage
intervals printed in your vehicle's Warranty
&
Maintenance booklet matters a lot more to­
day than it did years ago . Audi has deve loped
a spec ia l quality standard for engine oil that
will help assure that your vehicle's engine w ill
get the lubrication it needs for proper opera­
tion.
Modern engine lubrication has taken a quan ­
tum leap in the last few years. Many synthetic
IIJ>,

260 Check ing and filling
oils available today provide better engine lu ­
brication that can outlast tradit ional petrole­
um-based o ils, making them a smart choice
for use throughout the life of your Audi.
Whether you use synthetic or petroleum ­
based engine oil, the oil that yo u use must
conform to Audi's oil q uality standard
VW 502 00 (vehicles with gasoline engine) or
VW 507 00 (veh icles with diesel engine) to
he lp keep you r vehicle's eng ine running
smoothly and help preve nt the formation of
h a rmful depos its , somet imes ca lled "sludge,"
that ove r time can lead to expensive repairs.
At the time of pri nting, engine oi ls available in
the U .S . and Canada that meet the exacti ng
specifications of A udi oi l standard VW 502 00
(vehicles wi th gasol ine engine) or VW 507 00
(vehicles wi th diesel engine) are synthetic en­
g ine oi ls . T his does not mean, however, that
eve ry synthetic engine oil will meet Aud i oil
standard VW 502 00 (vehicles with gaso line
engine) or VW 507 00 (veh icles w ith diese l
engine). So always be sure that you use an ap­
proved oil.
To help preve nt the fo rmation of harmful de ­
posits use only oi l w ith the fo llow ing spec ifi­
cations printed on the oil container :
-Audi oil standard VW 502 00 (ga soline en­
gine )
- Audi oil standard VW 507 00 (die sel en-
gine )
Oil conta iner labe ls may ca rry t he specifi ca­
tion s ingly or in combinat ion wi th o ther des ig­
nations and oil q ua lity standards.
Visco sity
Eng ine oils are graded acco rding to their v is­
cosity . T he proper v iscosity grade o il for your
engine d epends on cl imactic or seasonal con­
d it ions where you dr ive. You can use oi l w ith a
v iscosi ty g rade of SAE SW40 a cross all te m­
pe ra tu re ranges for normal d riving conditions.
H owever, if eng ine o il viscos ity grade SAE
SW40 is not avai lab le, you ca n also use viscos­
ity grade SA E SW-3 0 or SA E OW -40 a s long as
it meets A udi o il quality stan dard VW 5 02 00 (veh
icles w ith gasoline engine) o r VW 50 7 00
(ve hicles w ith diese l engine) specifications .
B ecau se eng ine o il that mee ts the Audi o il
sta ndard may not be availab le everywhere
when you need it, we strong ly recommend
t h at you a lways carry with you an extra quart
( li ter) of oil that express ly con forms to the
VW 502 00 (veh icles with gasoline engine) or
VW 507 00 (vehicles with d iese l eng ine) spec­
ification , in case you have to top off t he oi l
wh ile on the road.
Applies to vehicles with gasoline engine on ­
ly:
Only if the level of the o il is at or below the
min imum ma rk o n the o il dipstick -and no oi l
that expressly conforms to Audi o il standard
VW 502 00 spec ificat ions is available - may
yo u t op off with a high quali ty e ngine o il, pr ef­
er ab ly synthe tic-based, tha t mee ts AC EA A3
o r API SM spec ificat ions, bu t even then, only
in viscosi ty g rades SAE SW -40, SAE SW -30, o r
SAE OW -40 . However, during t he ent ire time
between oil change intervals, never top off
with more than a total of 0.5 qt/liter engine
o il that does not conform to Audi o il specifica­
t ion VW 502 00 .
Applies to vehicles with diesel engine only:
Only if the level of the oil is at or be low the
min imum mark on the o il dipstick - and no oi l
that expressly conforms to Audi o il standard
VW 507 00 spec ificat ions is ava ilable - may
you top off with a h igh quality engine o il, that
mee ts AC EA C3 o r AP I CF spe cifica tions, bu t
even then, on ly in vis cosity gr ades SA E
SW -40, SA E SW -30, or SAE OW- 40. However,
during the entire time between oi l change in­
terva ls , never top off with more than a tota l
of 0 .5 qt/liter engine oil that does not con­
form to Audi oil specification VW 507 00.
F or more information about engine oi l that
has been approved for your vehicle, please
contact e ither yo ur authorized Aud i dea le r or
Audi C ustomer Re lations at 1 (800) 822-2834
or v is it our web si te at www.audiusa.com or
www .aud icanada .ca. Here you w ill also find a
c ur rent list of oi ls (manufacturers, bra nd
names etc.) that conform to Aud i oil standa rd .,.

VW 502 00 (vehicles with gasoline engine) or
VW
507 00 (vehicles with diesel engine).
C han gin g the en gin e o il
The engine oil and oil filter must be changed
according to the m ileage (ki lomete rs) and
time inte rva ls specified in your vehicle 's War­
r anty
& M aintenance booklet. Do not ex ceed
t hese intervals -harmf ul depos its from old
engine oi l can reduce engine performance and
can lead to expensive engine repairs.
Changing the o il at the recommended inte r­
va ls is so very important because the lub ric at­
ing p roperties o f oi l decrease grad ually during
norma l vehicle use . If you are not sure when
you have yo ur oi l changed, ask your a uthor­
ized A udi Service Advisor.
Unde r some ci rc u mstances the engine o il
should even be changed more frequently.
Change o il more often if you drive mostly
short distances, operate the vehicle in dusty
areas or mostly under stop-and-go traffic con­
d itions, or when you use your vehicle where
temperatures stay below freezing po int for
l ong periods .
Detergent addit ives in the o il w ill make fresh
oil look dark after the eng ine has been run­
ni ng fo r a short time . This is no rmal and is not
a reason to change the o il mo re often than
r ec om mended.
Damage or malfun ctions due to lack of
maintenance
It is essential that yo u change your oil at the
recommended interva ls using only engine oil
that complies with Audi oi l standard
VW
502 00 (vehicles with gasoli ne engine) or
VW
507 00 (veh icles with diesel engine) . You r
Lim ited New Vehicle Wa rra nty does not cove r
damage or m alfu nct ions due to f ailure to fol­
l ow recommended maintenance and use re­
q uir ements as set forth in the A udi Owner's
M anual and Warranty
& M aintenance book let.
Your dea ler will have to deny warranty cover­
age un less you present to the dea ler proof in
the form of Service or Repa ir Orders that all
Checkin g and fillin g 261
scheduled maintenance was performed in a
timely manner.
· Engine oil consumption
To provide effective l ubr ication and cooling for
interna l eng ine parts, all interna l combustion
engines use some oi l. Oi l consumption varies
from eng ine to engine and may change over
the life of the engine . Engines tend to use
more o il du ring the b reak-in period tha n they
do afterward, when o il cons umption has sta­
bilized. Depend ing on the way the vehicle is
driven and the operating conditions, oil con­
s u mption can be up to
1 quart per 1,200
miles (l liter per 2,000 km) . Consumption
may be higher within the first
3,000 m iles
(5,000 km) .
U nder normal conditions , the rate of oi l con ­
s u mption depends on oi l quality as well as vis­
cosity, engine speed (rpm), outs ide tempera ­
ture, road conditions, the amount of oil dilu­
tion caused by condensed water or fue l resi­
due, and ox idat ion of the o il. Oi l consumption
may increas e with eng ine wear over time, un­
t il rep lacement of worn engine pa rts may be­
come ne cessa ry.
Because of all these var iables, there is no
standard o r "n orma l" rate of o il cons umption .
We urge you to check the engine oil level at
regular interval s, preferably every time y ou
fill the fuel t ank, and always before a long
trip .
The oil pres sure warning light. i s not an
indicator of low engine oil level. If the warn ­
ing light does not go out after starting, or
flashes while dr iving (above 1500 rpm), a
buzzer will sound. It indicate s that the oil
pressure is too low . Stop the engine immedi ­
ately , check the engine oil level and add oil if
necessa ry. If the engine oil level is normal,
but the l ight continues to fla sh, do not keep
driving or let the engine idle, as damage may
occur .
IIJ,
•
•

per 2,000 km). Consumption may be higher
within the first 3 ,000 mi les (S,000 km).
Adding engine oil "1:::1:
0 N ~ N
" "' "'
F ig . 2 44 Eng in e c omp art m ent: co ver on the eng ine o il
fi ller nec k
Befo re you check anything in the engine com­
partment,
al way s read and heed all WARN ·
INGS ¢&. in Working in the engine compart­
ment on page 257 .
... Sh ut the engine off.
.,. Unscrew the cap~ to the engine oil fill ing
hole ¢
fig. 244, ¢ page 259 , fig . 241.
... Carefully top off with 0 .5 quarts (0 .5 lite rs)
of the appropriate o il ¢ page 259.
.,. Check the oil leve l aga in afte r two minutes
¢ page 262, Checking the engine oil level.
.,. Top off the oil again, if necessary.
... Screw the cap back on the filling hole and
sli de the oil dipst ick in as far as it will go.
A WARNING
Stop! Before work ing in the engine com ­
partment, always read and heed all WARN­
INGS
c> .& in Working in the engine com­
partment on page 257 .
The engine com­
partment of any motor veh icle is a poten­
tially dangerous a rea and can cause ser i­
ous pe rsonal injury.
.&, WARNING
Spilled o il is a fi re ha zard.
- The oil filler cap must be prope rly se­
cur ed to preve nt oil from being sprayed
on the ho t engine and exhaust sys tem
when the eng ine is r unning .
-
Checkin g and fillin g 263
@ Note
-The oil leve l m ust not be above range (v
- danger of converter or engine damage!
Contact an authori zed dealership to draw
off oil, if necessary.
- Audi does not recommend the use of oil
additives. They may damage the engine
and adverse ly affect your New Vehicle
Warranty.
® For the sake of the environment
- Under no circumstances can the oil come
in contact with the sewage network or
the soil.
- Observe and follow legal regulat ions
when dispos ing of empty oil containers.
Changing the engine oil
E ngine oil mus t be changed a t in tervals lis ted
in the Warranty
& Maintenance bookle t.
The engin e oi l and oil f ilter m ust be changed
acco rd ing to the mileage and time intervals
specified in yo ur vehicle's Warranty & Mainte·
nance booklet . Do not exceed these intervals -
harmful s ludge and deposits from old engine
o il can reduce engi ne pe rformance and can
l ead to expens ive engine repa irs .
Chang ing oil at regular interval s is so very im­
po rtant because the lubricat ing p roperties of
o il decrease gradually du ring normal veh icle
use. If you are no t su re when to have t he oi l
c h anged, ask your a uthori zed Audi Serv ice Ad­
visor .
U nder some circumstances the engine oil
shou ld eve n be cha nged more often than
spec ified for normal use. Ch ange o il more of­
ten if you often drive short distances , operate
the ve hicle in dusty areas or mostly under
stop -and -go t raffic conditions, or when you
u se you r veh icle where temperatures stay be­
low free zing point for long periods .
Dete rgent additives in the oil will make fres h
oi l look dark afte r the engine has been run-
ning for a short time . Th is is normal and is not
Ill>
•
•