while driving. You can switch this function off by moving the lever to position ® within 10
seconds of the afterwipe operation. The after
wipe function is reactivated the next time the ignit ion is switched on.
The rear wiper automatically switches on
when the reverse gear is engaged and the
front w indshield wipers are on and in opera
tion .
C lea ning the headlights *. The headlight wash
er system * operates on ly when the headlights
are on. If you move the lever to pos ition ®,
the headlights are washed in interva ls .
® -Wipe the rear window. The rear wiper
moves about every 4 seconds .
0-Clean the rear window. The number of
wiping operations depends on how long the l ever is held in positio n 7.
A WARNING
-The ra in sensor is only intended to assist
the driver. The driver is still responsible
for man ually sw itching the w ipers on ac
cording to the v is ibility conditions.
- The windshie ld may not be treated w ith
water-repe lling windshie ld coat ing
agents. Unfavorable conditions, such as
wetness, darkness, low sun, can res ult in
increased glare. W iper b lade chatter is
also possible .
- Proper ly functioning w indshie ld w iper
blade s are required fo r a clear view and
sa fe dr iv ing .
(D Note
-In the case of frost, check whether the
windsh ield wiper b lades a re fro zen to
t h e windshie ld. Swit ching on the wind
s h ield wipers can d amage t he wipe r
blades!
- Prior to using a car w ash, the windshield
wipe r system m ust be swit ched off (lever
i n position 0) . This helps to prevent unin
tentiona l switching on and damage to
the windshie ld w iper system.
Clear v is ion 5 5
(D Tips
- The windshie ld w ipers are switched off
when the ign it ion is tu rned off . Act ivate
the windsh ield wipers after the ignition
is switc hed back on by moving t he wind
shield wipe r lever to any position .
- Worn or d irty windshield wiper blades
result in streaking. This ca n affect the
rai n sensor function. Check your wind
shield w iper blades regularly.
- The washer fluid nozz les of the wind
shield washe r system a re heated at low
tempe rat ures whe n the ignition is on .
- When stopping temporarily, e .g. at a
t raffic light, the set spe ed of the wind
shield wiper s is automatically reduced by
one speed.
Cleaning windshield wiper blades
C lean the w indsh ie ld w iper blades when t hey
begin to leave st reaks.
.,. Place t he w indshie ld w iper arms in the serv
ice pos ition. Re fer to ~
page 56.
.,. Lift the wiper a rm away from the rea r win
dow .
.. Use a soft cloth and glass cleane r to clean
the windshield wiper b lades.
A WARNING
Dirty windsh ield wiper b lades can impair
your view . This can lead to accidents .
Replacing windshield wiper blades
Fig. 55 Remov ing the w iper blad e
56 Clear vis ion
Wiper servi ce po sition /blade rep lacem ent
po sit ion
• Switch the ignition
off and move the wind
shield wiper lever to position @¢
page 54,
fig. 53. The windshield wipers move into the
service position.
• To bring the wipers back into the original
pos ition, switch the ignition on and press
the windshie ld wiper lever.
You can also turn the service position on or off
in the radio or
MMI*:
• Switch the w indshield wipers off (posit ion
@ ¢page 54, fig. 53).
• Se lect : I CAR I funct ion button> Wind shi eld
wiper s > Se rvice positio n > On/Off .
Or
• Se lect :
I CAR I function button> Car sys te m s*
control button > Servicing & check s > W iper
s e rv ic e po sition > On/ Off .
Removing the wip er blade
• Lift the windshie ld wiper arm up from the
windshield .
• Press the locking knob@~
fig. 55 on the
wiper blade. Hold the wiper blade firm ly.
• Remove the wiper blade in the direction of
the arrow.
Attach ing th e wiper bl ade
• Inse rt the new wiper blade into the moun t
on the w iper arm @until you hear it latch
into place.
• Place the wiper arm back on the windshield.
• Turn the service position
off.
A WARNING
-
For your safety, you should replace the
w iper blades once or tw ice a year. See your
author ized Audi dealer for rep lacement
blades.
(D Note
- The windshield wiper blades must only
be replaced when in the service position!
Otherwise, yo u risk damaging the paint
on the hood or the w indshield wiper mo
tor. -
You should not
move your veh icle or
press the windshield wiper lever when
the wiper arms are folded away from the
windshield. The windshie ld wipers wou ld
move back into their original position
and could damage the hood and wind
shield.
- To help prevent damage to the wiper sys
tem, always loosen blades wh ich are fro
zen to the windshield before operating
w ipers.
- To help prevent damage to wiper blades,
do not use gaso line, kerosene, paint
t hinner, or o ther solven ts on o r near the
w iper blades.
- To help prevent damage to the wiper
arms o r other components, do not at
tempt to
move t he wipe rs by hand.
© Tips
- Commercial hot waxes applied by auto
matic car washes affec t the how easily
the glass surfa ce ca n be cleaned.
- Yo u can also use the se rvice position, for
examp le, if yo u want to protect the
w indshield from icing by us ing a
cover.
Replacing the rear wiper blade
&:
F ig . 56 Rear wiper: Removing t he wipe r blade
Removing the wiper blade
• Fold the windshie ld wiper arm away from
the windshield .
• Pull the w iper blade and holder out of the
mount.
Attaching the wipe r blade
g
8 rr. ., II)
• Press the wiper blade holder in the arrow di-
rection ~
fig. 56 into the mount. ..,.
.. Fold the windshield wiper arm back onto the
windshield.
A WARNING
For safety reasons, the windshield wiper
blades should be replaced once or twice
each year.
Mirrors
Adjusting the exterior mirrors
F ig. S7 Fo rwa rd sec tion of drive r's ar m rest : power mir
r or co ntro ls
Adjusting ext erior mirrors
.,. Rota te the knob to the© posi tion (drive r's
exter io r mirro r) or to the ® pos it ion (pas
senger's exter io r mirro r)
c::> fig. 57 .
.. Rotate the knob and the mirror so t hat you
have a clear view to t he rear.
Heated mirrors
.. Ro ta te the knob to pos it io n @ .
Folding both exterior mirrors*
.. Turn the knob to position @.
-
Depending on the outside temperature, the
mirror surfaces are heated unt il the ignition is
switched off -even if the knob is no longer in
position @.
You are well-advised to fold the exterior m ir
rors in when maneuveri ng in tight spaces or
when leaving the car parked close to other
vehicles .
Memory for exterior mirror s*
On vehicles with memory for the driver's seat,
the current sett ing fo r the exterior m irrors is Clear vi
sion 5 7
automatica lly stored a long with the sea t posi
tion
c::> page 63.
Tilt function for the passenger 's mirror*
When the reverse gea r is engaged, the mir ro r
s ur face tilts downward sl igh tly if the sett ing
i s for the passenge r's m irror (knob in pos it ion
®
c::> fig . 57). This a llows you to see the c urb
dur ing parallel pa rking.
T he m irror returns to its ini tial position as
soon as reverse gea r is disengaged and veh icle
s p eed is above about 9 mph (15 km/h) . The
mirror also returns to its init ial position if the
switch is moved to the dr iver's exterior m irror
© or the ignition is sw itched off.
If the position of the mirror surface is
c hanged on a tilted mirror, this new position
will be a utomatically ass igned to the remote
key w hen the veh icle is taken out of reverse
gear.
(D Note
- Curved mirror s urfaces (conve x or spheri
cal*) increase yo ur field of v iew. Remem
ber that vehicles or other objects will ap
pear smaller and farther away than when
seen in a flat m irror. If you use this mir
ror to estimate dis tances of following
vehicles whe n cha nging lanes, y ou coul d
es tim ate incorrec tly and c ause an ac ci
dent .
- I f the m irro r h ousing is moved uninten
ti onally (for e xam ple, w hile p arking yo ur
vehicle), then yo u must first fold the mir
ror elect rically . Do not read just the mir
ror housing man ually . You cou ld damage
the motor which controls the mirror.
- If you wash the vehicle in an automatic
car was h, you must fold the exterior mir
rors in to reduce the risk of damage to
the mirrors . Never fold power fo lding ex
terior mirrors* by hand . Only fo ld them
in and o ut using th e power controls .
liJl,
218 Vehicle care and cleaning
A WARNING
- Only wash the vehicle when the ignition
is off and follow the instructions from
the car wash operator to reduce the risk
of accidents .
- To reduce the r isk of cuts, protect your
self from sharp meta l components w hen
wash ing the unde rbody or the inside of
the whee l housings.
- After washing the vehicle, the braking ef
fect may be de layed due to mo isture on
the b rake ro to rs or i ce in the winter. The
brakes must be dried first with a few
careful brake applications.
(!;) Note
- If you wash t he vehi cle in an automatic
ca r wash, yo u m ust fold the exterior m ir
ro rs in to reduce the r is k of damage to
the mirrors. Power folding exte rior m ir
ro rs * must only be folded in and out us
i ng the power folding function.
- Compare the track of your vehicle wit h
the distance between the gui de rails of
the facility - there is a risk of damage to
the wheels and t ires.
- Compare the height and width of your
vehicle with the he ight and width of the
tunnel at the fac ility. -
To p revent paint damage, do not wash
the vehicle in di rect sunlight.
- T o reduce the ris k of damage to the sur
face, do not use insect removing spong
es, kitchen sponges or similar items.
- M atte finish painted veh icle compo
nents:
- To reduce the risk of damage to the
surface, do not use polishi ng agents or
hard wax.
- Never use car wash cycles that apply protective wax.
It can destroy the
matte fi nish effect.
- Do not place any stickers o r magnet ic
signs on v ehicle parts painted w ith
ma tte fi nish paint. The paint cou ld be
damaged when the stickers o r mag nets
a re removed .
@ For the sake of the environment
O nly wash the ve hicl e in facili ties spe cially
d esi gned for that p urpose. This will red uce
the r is k of dirty wate r contam ina ted with
o il from entering the sewer system.
Cleaning and care information
When cleaning and caring for individua l vehi
cle components, refer to the fo llowing tab les .
The information contained there is simp ly rec
ommendat ions . For quest io ns or for compo- nents that are not listed, refer to an author
ized Audi dealer or a qualified workshop. Also
fo llow the information found in <=> & .
Cleaning exterior Component Situation Solution
Wiper blad es Dirty <=> page 55, Cleaning windshield wiper blades
Headlights/ Dirty Soft sponge with a mild soap so
lution al
tail lights
Sen sors / Dirty Sensors : soft clot h w it h a so lvent-free cleaning p roduct
camera l enses Camera lenses: soft cloth with an alcohol -free cleaning
so lution
Snow/ice Hand brush/so lvent -free de-icing spray
308 Index
Seating position Driver ..... ................ ..... . 140
Front passenger .............. .... . 141
How to adjust the front seats . . . . . . . . 141
Incorrect seat position . . . . . . . . . . . . . . 143
Occupants .. ................ ... ... 140
Rear passengers ....... ..... .. .. .. . 142
Sea transport . . . . . . . . . . . . . . . . . . . . . . 106
Selective catalytic reduction
refer to Ad Blue ........... .... .. .. . 228
Selective unlock feature ............... 39
Selective whee l torque control (all-wheel
drive) ... .... ...................... 197
Selector lever .. ........... .. .. .... . 123
Emergency release .......... .. .... . 128
Service and disposal Safety belt pretens ioner ....... .. ... 156
Service interval disp lay . . . . . . . . . . . . . . . . 22
Service position
refer to Replacing wiper blades ... .. .. 55
SET button . . . . . . . . . . . . . . . . . . . . . . . . . 11
Shift buttons .................. .... . 127
Ship transport ...................... 106
Shutting down vehicle ....... .... .... 207
Side airbags Description ............... ... .... . 172
How they work ........... .... ..... 174
Side assist
Activating and deactivating ..... .... . 118
Adjusting the brightness ..... .... .. . 118
C leaning the sensors ....... ... .. ... 218
Description .................. ..... 116
Sensor range . . . . . . . . . . . . . . . . . . . . . 117
Side curta in airbags .......... .. .... . 175
Description ............... ... .... . 175
How they work ............ ... .... . 176
Safety instructions ............ .... . 177
Side marker lights ................... 49
Snow chains ........... .... .... .... 263
Socket . ..... ................ ..... .. 75
Sound system display
Driver information display . . . . . . . . . . . . 20
Sources of information about child re-
straints and their use ........... .. ... 196
Speedometer . . . . . . . . . . . . . . . . . . . . . . . 13
Speed rating letter code ....... .. .... . 259 Speed warning system ...........
.. .. . 93
Start-Stop-System . . . . . . . . . . . . . . . . . . . 91
Engine does not switched off ......... 92
Engine starts automatica lly ... .. .. .. . 92
Indicator lights .................... 91
Messages ..... .. .. .............. .. 93
Starting/stopping the engine .... .. .. . 91
Switching off/on . . . . . . . . . . . . . . . . . . . 93
START ENG INE STOP button (Convenience
key) . . . . . . . . . . . . . . . . . . . . . . . . . . . 86, 87
Starting from rest .................... 89
Starting off with a trailer .......... ... . 90
Starting the engine . . . . . . . . . . . . . . 83, 86
Starting (engine) .................... 98
Steering Electromechanical power assist . . . 201, 0
In dicator light ... ................. 201
Locking the steering ................ 83
Malfunction . . . . . . . . . . . . . . . . . . . 31, 35
Manually adjusting the steering wheel .. 83
also refer to Electromechanical power as-
s ist ......... ... .. .............. . 201
Steering wheel column
Adjusting manually ............ .. .. . 83
Steps for determining correct load limit . 256
Stopping the engine . . . . . . . . . . . . . . 85, 87
Stopping (engine) .. ............. .. .. . 98
Storage .. .. .. .. .. ............... ... 76
Cu pholder door pockets . . . . . . . . . . . . . . 7 4
G love compartment . . . . . . . . . . . . . . . . . 76
Sun shade .................. ........ 54
Sun visors .. .... .................... 54
Supplementary (climate control) ..... .. . 82
Switches Emergency flashers . . . . . . . . . . . . . . . . . 52
Symbols Red .............................. 28
Yellow .... .... ................... . 31
T
Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . 11
T ail lights
Cleaning .. .. .. .. ................. 218
TDI clean diesel
refer to Ad Blue ........ ........... . 228
Technical data ...................... 289