In addition to t his Owner's Ma nual, your A udi
comes w ith a Warranty
& Maintena nce book
l et.
Mor eover , d ep en ding on the mode l and t he
e quip ment, there may be additiona l ins truc
tion boo klets delivered w ith your vehicle (for
e x amp le, Ope rat ing Instr uctions fo r yo ur
Sound System, Navigation System etc .).
If yo u are m iss ing one of these publicat ions,
or if you believe that the inf ormation is not
comp lete, contact you r auth orized Audi dea le r
for assistance.
The Warranty & Maintenance booklet
explains how yo u can kee p your A udi in top
d riving conditi on by hav ing it serviced regular
l y and conta ins deta iled in fo rmat ion about
the wa rranties covering your Aud i. Always
h ave the book let with yo u when yo u take your
ve hicle to an auth orized Audi dealer for serv
i ce . Y our Aud i Service Adviser w ill reco rd each
sche duled service and can answer any ques
tions you may have r ega rding how to ma intain
your ve hicle.
In Canada,
the vehicle lite ratu re is also avai lab le in
Fr ench . T o obtai n a co py, c ontact your dea ler
or w rit e to :
Au Canada, on peut se procure r un e xempla ire
e n fran~ais de ce doc ument aupres du conces
sionna ire ou de :
Vo lkswagen Canada, Inc.
Client Assistance
Assistance a la Clientele
77 7 Bayly Street, West,
A jax, On tario LIS 7G 7
If you sell your Audi
all literatu re should be left in the veh icle to
make the Warranty terms as we ll as a ll oper
ating, safety and ma intenance information
ava ilab le to the ne xt owne r.
Vehicle literature 5
If you change your address or if you
bought this Audi used
b e s ure to send in a "Notice of A ddress
Change"
I " N otice of Used Car Purchase" post
ca rd. T his card can be fo und in the War ranty
&
M aint enance booklet or obtained from your
a utho rized Aud i dea le r.
It is in your own interest that we are able to
contact you should the need arise .
•
•
Instrument s and warning /indicator lights 13
Odometer
The odometer indicates the distance driven.
Fig. 6 Instrument cluster: odometer
Fig. 7 Instr ument cluster: reset button
The display of distance driven is shown in kilo
meters "km" or in "m iles".
- USA models -Miles
- Canada models -Kilometers
You can switch from kilometers to miles or
vise versa in the radio or in the MMI*. You can learn more about this in the MM
I manual or in
the radio user 's manual.
Odometer /trip odometer
T he odometer shows the total number of kilo
meters or m iles that have been driven on the
vehicle.
The trip odometer shows the distance driven s ince it was last reset.
It can be used to meas
ure short distances . The last digit shows dis
tances of 100 meters or 1/10 of a mile.
The trip odometer can be reset to zero by pressing the reset button
10 .019 fig. 7.
Malfunction message
If there is a malfunction somewhere in the in
strument cluster,
dEF will appear in the trip
odometer and w ill stay on. Contact your au
thorized Audi dea ler to have the prob lem cor
rected.
{t) Tips
- When you switch off the ignition or open
the driver door, the time, date, odome
t er and temperature are displayed for an
additional 30 seconds.
- You can also call up the display with the
!SET ! button ~ page 11 while the igni
tion is switched off.
Instrument s and warnin g/indic ator ligh ts 15
Canada m od els: Anti-lock brake
system (ABS) defective
¢ page 17
USA mode ls: Parking brake
¢page 18
Canada models : Parking brake
¢page 18
USA models: Brake malfunction
¢page 18
Canada m odels : Brake malfunc
tion
¢page 18
In vehicles with adaptive cruise control* add i
tional indicator lights are disp layed
¢page 109.
A WARNING
-Failure to heed warning lights and other
important vehicle information may result
in serious personal injury or vehicle dam
age .
- Whenever stalled or stopped for repa ir,
move the vehicle a safe distance off the
road, stop the engine, and turn on the
emergency flasher ¢
page 52.
- The engine compartment of any motor
vehicle is a poten tially ha zardous area.
Be fore you check anything in the engine
compartment, stop the engine and let it
cool down. Always exercise extreme ca u
tion when working under the hood
~ page231
@ Tips
Many f unctions are monitored by the A uto
Check system ¢
page 2 7. Malfunctions
or faults will be identif ied either w ith a red
symbo l (pr iority 1 -Danger!) or with a yel
low symbol (prior ity 2 -Warning).
EPC Electronic power control
Applies to veh icles: w ith gasoline engine
This warning/indicator Light monitors the
electronic power control .
The~ warning/indicator light (Electronic
Power Control) illuminates when you turn on
the ignit ion as a funct ion check .
(D Tips
If this warn ing/ indicator light illum inates
while yo u are driving , then there is a mal
funct ion in the engine electronics. Have
the malfunct ion corrected as soon as pos
sible by your authorized A udi dealer or
q ualified works hop.
W Glow plug system
Applies to veh icles: w ith diesel engine
The control Light illuminates when the glow
plug system is active .
If them indicator light illumi nates, the g low
plug system is act ive . You should start the en
gine immediately after the ind icator light
swit ches off. The ind ic ator lig ht only i llum i
na tes fo r approxim ate ly 1 second if the en
gine is warm or if the outs ide temperature is
above 46 QF (8 QC).
(D Tips
- I f the glow plug indica tor ligh t illum i
nates while dr iving, there is an eng ine
cont ro l malfunction. T he engine should
be checked immediate ly .
- If the ind icator light does not illuminate
at a ll when switching the ign ition on,
there may be a malfunction in the glow
plug system. The engine sho uld be
checked.
YJ, t[J Electronic Stabilization Control
( ESC)
If the J.ij indica tor l igh t blink s while d riving,
t h e ESC or ASR (An ti-Slip Reg ulat ion) is ac tive -
ly reg ulating .
IJI>
16 Instruments and warning/indicator lights
If the Jj;] indicator light turns on, the system
has switched the ESC
off . In this case, you can
switch the ignition
off and then on to switch
the ESC on again. The indicator light turns
off
when the system is functioning fully.
If the
11 indicator light turns on, ESC was re
str icted using the
I~ OFF I button ¢ page 197.
Stabilization control (ESC/ABS): Fault! See
owner's manual
I f the
Jj;] indicator light and the ABS ind icator
l ight ~ (USA models)
Iii] (Canada models)
turn on and the message appears, the ABS or
e lectronic differential lock is ma lfunctioning.
This a lso causes the ESC to malfunction . The
brakes st ill function with the ir normal power,
but ABS is not active.
Drive to your authorized Audi dea ler or quali
fied workshop immediately to have the mal
function corrected.
A WARNING
-
If the ~ (USA models)/ . (Canada
models) brake system ind icator light turns
on together with the ABS and ESC ind ica
tor lights, the ABS/ESC regulating function
may have fai led. Functions that stabilize
the vehicle a re no longer ava ilab le. This
could cause the vehicle to swerve and in
crease the risk of sliding. Drive carefully to
the nearest a uthorized Audi dea ler or oth
er qualified workshop and have the mat-
function corrected.
(D Tips
For additional information on ESC and
ABS, refer to¢
page 197.
it !f Safety systems
The fl (USA models) tE,I (Canada models) in
dicator light monitors the safety systems (e.g.
a ir bags, pretensioners) and illuminates for a
few seconds each time you switch the ignition
on .
If the
fl (USA models) tE,I (Canada models)
indicator light does not go out, or if it illumi- nates while you are driving, or if it starts to
blink,
then there is a malfunction somewhere
in the system. If the light does not illuminate
when you switch the ign ition on, this also
means there is a malfunction.
A WARNING '"--
If you have a malfunction in the safety sys-
tems, contact your authorized Audi dealer
imme diately. Otherwise the safety sys
tems may not work properly in an acc i
dent.
ill Tire pressure monitoring system -
telltale indicator lamp
Applies to vehicles: wit h tire p ressu re mo nito rin g system
The warning/indicator light appears in the
event of a significant loss of tire pressure or if
there is a malfunction .
The ind icator light IE illuminates to check
the function when you switch on the ignition.
If the
IE symbol remains on or blinks after
you sw itch on the ign it ion, there is a loss of
t ir e pressure or a system malfunction. If there
is a system ma lfunction, see your authorized
Audi dealer as soon as possible.
Detailed informat io n on the tire p ressure
monitoring system can be found in
¢page 265.
¢¢Turn signals
The indicator light blinks when you use either
turn signal.
Whenever you use the left (I or the r ight II
turn sig nal, the indicator light blinks. When
you use the emergency flashers, both indica
tor lights flash .
If one of the turn signa l light bulbs burn out,
the turn sig nal will blink twice as fast as nor
mal.
This does not apply, however, in towing mode .
The indicator light does not flash if a turn sig
nal is out on the tra ile r or the towing vehicle. .,.
Instrument s and warnin g/indic ator ligh ts 17
Additional information on the turn signa ls
~ page 52.
¢19 Trailer turn signal assembly
App lies to vehicles: with towing hitch
The indicator light also blinks if the turn sig
nal is operated when towing a trailer .
The indicator ligh t. blinks when the t urn
signal is used, if a trailer has bee n properly
connected to the vehicle .
If one of the turn s ignal bulbs on the tra ile r i s
bu rned out or defective, the indicato r light
will not b link when you use the turn signals.
(j) Tips
For veh icles with a factory installed towing
hitch o r a trailer h itch tha t was installed
la ter ac co rding to fac tory specifications,
the trailer t urn signa l assemb ly is actuat
ed .
,i Safety belts
This warning/indicator light reminds you to
put on your safety belt.
The . warning/ind icator lig ht ill uminates
when the igni tion is sw itched on to rem ind
the driver and (on USA models only) any front
passenger to put on the safety belt . Add ition
a lly, an audible warning tone will a lso sound .
F or more Information
~ page 149, Safety
belt warning light .
a Malfunction Indicator Lamp (MIL)
The Malfunction Indicator Lamp (MIL) is part
of the On-Board Diagnostic (OBD II) system.
The symbol
¢"lift lights up when the ignit ion is
turned on and will turn off after the engine
has started and has sett led at a constant idle
speed. Th is ind icates that the MIL is working
p roperly .
The warning light illuminates when there is a
malfunct ion in the engine e lectronic system. Contact your a
uthorized Audi dea ler and have
the malfunction corrected .
An improperl y clo sed fu el filler cap may al so
cau se the MIL light t o illumin ate (onl y
vehicles with g asoline engi ne)
q page 226.
Fo r more information
q page 26.
[D High beam
The ii warn ing/indi cator lig ht ill uminates
when the high beams a re on or when you use
the headlight flasher. For more information
about using the high beams, see
¢ page 52.
CRUISE/" (') Cruise control
The MjlO~i4 (USA mode ls) Jill (Canada models)
warning/indicator light illuminates when the
cruise control is activated .
ABS/(@) Anti-lock brake system (ABS)
This warning/indicator light monitors the ABS
and the electronic differential lock (EDL).
The fJ] (USA models) ; ri] (Canada mode ls)
warning/indicator light will come on for a few
seconds when the ignition is switched on. The
light will go out after an automatic check se
quence is completed.
There is a malfunct ion in the ABS when:
- The warning/indicator light does not illum i
nate when you switch on the ignition.
- The warning/indicato r light does not go o ut
after a few seconds.
- The warning/indicato r light i lluminates
wh ile driving.
The brak e system will still re spond e ven
without the assistance of the ABS system.
See your autho rized Audi deale r as soon a s
possible to re store full br aking performance.
For more information regard ing the ABS
q page 197.
The ABS warning light and the b rake warn
ing light come on togethe r. The ABS will not
wo rk and you will notice a change in b raking
response and performance . .,,.
18 Instruments and warning/indicator lights
Malfunction in the brake system
If the brake warning light c::> page 18 and
the ABS warn ing illuminate
together there
may be a ma lfunction in the ABS, and there
may also be a malfunction in the brake system
itself
c::> A .
In the event of a malfunction in the brake
system
the warning/indicator light 1111
(USA models);II (Canada models) in the in
strument cluster flashes. By pressing the
! SET !
button, you can bring up a dr iver message
which explains the malfunction in more de
tail. Please note
c::> page 29.
Malfunction in the electron ic differential
lock (EDL)
The EDL works together with the ABS. The
ABS warning light will come on if there is a
malfunction in the EDL system
c::> page 197.
See your authorized Aud i dealer as soon as
possib le.
.&_ WARNING
-
- If the~ (USA models) l[!J (Canada
mode ls) warning light does not go out,
or if it comes on while driving, the ABS
system is not working properly. The vehi
cle can then be stopped only with the
standard brakes (without ABS). You will
not have the protection ABS provides.
Contact your authorized Aud i dealer as
soon as poss ible.
- If the
1111 (USA models)/. (Canada
mode ls) brake system indicator light
turns on together with the ABS and ESC
indicator lights, the ABS/ ESC regu lating
function may have failed. Functions that
stabilize the vehicle are no longer availa
ble. This could cause the vehicle to
swerve and increase the risk of sliding.
Drive caref ully to the nearest authorized
Audi dealer or other qualified workshop
and have the malfunction corrected.
::\ii(®) Electromechanical parking brake
The warning/indicator light monitors the
electromechanical parking brake.
With the parking brake applied and the igni
tion turned on, the. (USA models)/ . (Can
ada models) warn ing/ indicator light illumi
nates. After the ignition has been turned off,
the warn ing/ indicato r light continues to illu
minate for about 30 seconds.
If the parking
brake is applied with the ignition turned off,
the warn ing/indicato r light illuminates for
about 30 seconds.
T he wa rning/i ndicator lig ht will go out when
the parking brake is released.
If the warning/indicator light flashes continu
ously
after applying the pa rking brake, brak
ing force is not sufficient to prevent the veh i
cle from rolling unintentionally . Please note
the following:
- If the slope of the ground is too steep to
pa rk the vehicle, the additional drive mes
sage appears Caution : Vehicle parked too
steep.
- In the event of a pa rking brake malfunction,
the yellow
IIJ symbo l appears in the instru
ment cluster display and the driver message
Parking brake malfunction! is displayed.
Have the ma lfunction repa ired as soon as
possible by an authorized Audi dealer or any
other qualified workshop.
BRAKE/((D) Brake system
The warning/indicator light flashes if brake
fluid level is low, if there is an ABS system
malfunction or a parking brake malfunction.
The 1111 (USA models)/ . (Canada models)
li ght illuminates when the ignition is turned
on. It goes out after the engine has been
started . This indicates that the brake warning
l ight is functioning properly.
If the brake warning light does not light up
when the engine is cranking, there may be a
malfunction in the electrical system. In this
case, contact an authorized Audi dealer. ..,.
Instrument s and warnin g/indic ator ligh ts 19
If the brake system warning/indicator light
flashes, there is a brake system malfunction. By pressing the
ISETI b utton, you can br ing up
a driver message which exp la ins the malfunc
tion in more detail¢ page
29.
If the ABS fails, the ABS warning/indicator
light
fJln (USA models) ,11J (Canada models)
flashes together w ith the brake system warn
ing/indicator light¢,& .
(USA models): If the warning light
11111 and
the warning light
EIJ i llum inate together, im
mediately contact your author iz ed Audi dealer
or qualified workshop to have all brake pads
inspected ¢ page
33 .
When the light comes on, an audib le warning
signa l is also given.
A WARNING
- If the 11111 (USA models)/ . (Canada
models) brake system indicator light
tu rns on together with the ABS and ESC
indicator lights, the ABS/ESC regu lating
function may have failed. F unctions that
stabilize the vehi cle are no longer availa
ble. Th is could cause the vehicle to
swerve and increase the risk of sliding .
Drive carefully to the nearest a uthorized
Audi dealer or other qualif ied workshop
and have the malfunction corrected.
- If the brake warning/indicator light does
not go out after a few seconds and the
parking brake is released, or lights up
wh ile you are driving, the fluid level in
the brake fluid reservoir is too low . If you
believe that it is safe to do so, proceed
immediately at low speed to the nearest
au thori zed Audi dealer o r qualified re pair
f acili ty and have the brake system in
spected.
- Always keep in m ind tha t after several
brake applicat ions, yo u will need greater
pressure on the brake peda l to sto p your
vehicle. Do not re ly on stra ined brakes to
respond w ith maxim um stopp ing power
in critical situations. You must allow for
increased braking distances. The extra distance used up by fading brakes could
lead to an accident.
28 Driver information d isplay
The ignition key can on ly be removed with the
selector in this position. This and other mes
sages are brought up if a function cannot be
carried out.
Driver messages and red symbols
If a red symbol appears in the display, a driver
message is a lso displayed automatica lly.
F or example, the symbol fo r a problem with
engine o il pressu re . appea rs in the display .
The following message appears :
Turn off engine! Oil pre ssure too low
The driver message in the display goes out af
ter about
5 seconds. The dr iver message can
be d isplayed again by briefly pressing the
ISETlbutton
c::> fig. 22 .
Driver messages and yellow symbols
If a yellow symbol appears in the display, a
driver message is also displayed automat ical
ly .
For examp le, the symbol
B appears in the
d isplay, ind icating low w indshield washer flu
id level. The follow ing message also appears:
Please refill washer fluid
The driver message disappears after a few
seconds. The driver message can be disp layed
again by briefly pressing the !SE T! button .
Red symbols
A red symbol means DANGER.
Fig . 23 D isplay: Danger symbo l
.. Pull off the road.
.. Stop the vehicle.
.. Turn off the engine. ..
Check the malfunctioning system. Contact
your authorized Audi dealer or a qualified
workshop for assistance.
Red symbo ls ind icate a priority 1 malfunction
- Danger!
With a priority
1 malfunction, a red symbol
appea rs in the upper center area of the dis
play
c::> fig . 23 . A driver message appears as
well to exp lain the ma lfunction in more de
tai l. When this symbol appears,
three warning
tones sound in succession . The symbol contin
ues to flash until the fault has been corrected.
If
several priority 1 malfunctions are present,
the symbols appear in succession and remain
for about
2 seconds .
T he driver warning goes out after about
5 sec
onds, but it can be brought up again at any
time by pressing the I SET I button
c} page 2 7.
Alter nator failure
c::> page29
Electromechan ical steering
c::> page 201
USA models: Brake system
malfunction
c::> page29
Canada models: Brake sys
tem malfunction
c::> page29
En gin e coolant level too low/
engine coolant temperature
too high
c::> page 30
Engine oil pressure too low
c::> page 30
Refill engine oil now
c::> page 31
Refill Ad Blue*
c::> page 228
AdB lue ma lf unc tion*
c::> page 228
Steering malfunction
c::> page 31