Page 25 of 190

Aair temperature adjustment knob
(hot/cold air mixing);Binternal air recirculation on/off cursor;Cfan activation/adjustment knob;Dair distribution knob:air from central and side vents and
side diffusers;air from central and side vents,
side diffusers and footwell
diffusers;air from footwell diffusers;air from footwell and side diffusers
and from windscreen diffuser;air from windscreen diffuser and
side diffusers;
HEATING
To heat the passenger compartment,
proceed as follows:
❒ turn knob A to the red section;
❒ turn knob C to the desired speed;
❒ turn knob D to
.
This air distribution allows the
passenger compartment to be heated
quickly.
Then operate the controls to maintain
the desired comfort conditions. IMPORTANT When the engine is cold, it
takes a few minutes to achieve
optimum passenger compartment
heating.
FAST DEMISTING /
DEFROSTING OF
WINDSCREEN AND SIDE
WINDOWS
Proceed as follows:
❒
turn knob A to the red section;
❒ turn knob C to 4 (maximum fan
speed);
❒ turn knob D to
;
❒ bring cursor B to
.
After demisting/defrosting, operate the
controls as normal to restore the
required comfort conditions.
Window demisting
In the event of considerable external
moisture and/or rain and/or large
differences in temperature inside and
outside the passenger compartment,
perform the following preventive
window demisting procedure:
❒ bring cursor B to;
❒ turn knob A to the red section;
❒ turn knob C to 2 (intermediate fan
speed); ❒
turn knob D to
with the possibility
of moving it to position
if window
misting does not occur.
VENTILATION
To ventilate the passenger
compartment properly, proceed as
follows:
❒ fully open the vents and direct them
appropriately;
❒ turn knob A to the blue section;
❒ bring cursor B to;
❒ turn knob C to the desired speed;
❒ turn knob D to
;
INTERNAL AIR
RECIRCULATION
ACTIVATION
Bring cursor B to
.
It is advisable to switch the internal air
recirculation on while standing in
queues or in tunnels to prevent the
introduction of polluted air.
Do not use the function for a long time,
particularly if there are two people on
board, to prevent the windows from
misting.
22
GETTING TO KNOW YOUR CAR
24-9-2013 11:49 Pagina 22
Page 28 of 190

Aair temperature adjustment knob
(hot/cold air mixing);Binternal air recirculation on/off cursor;Cfan activation/adjustment knob;Dair distribution knob;Eclimate control compressor on/off
button;Fdoor mirror demisting button.
Knob D enables the air introduced into
the vehicle to reach all areas of the
passenger compartment through five
distribution options:air from central and side vents and
side diffusers;air from central and side vents,
side diffusers and footwell
diffusers;air from footwell diffusers;air from footwell and side diffusers
and from windscreen diffuser;air from windscreen diffuser and
side diffusers;
HEATING
To heat the passenger compartment,
proceed as follows:
❒ turn knob A to the red section;
❒ turn knob C to the desired speed;
❒ turn knob D to
. This air distribution allows the
passenger compartment to be heated
quickly.
Then operate the controls to maintain
the desired comfort conditions.
IMPORTANT When the engine is cold, it
takes a few minutes to achieve
optimum passenger compartment
heating.
FAST DEMISTING /
DEFROSTING OF
WINDSCREEN AND SIDE
WINDOWS
Proceed as follows:
❒
turn knob A to the red section;
❒ turn knob C to 4 (maximum fan
speed);
❒ turn knob D to
;
❒ bring cursor B to
.
After demisting/defrosting, operate the
controls as normal to restore the
required comfort conditions.
IMPORTANT The climate control
system is very useful for speeding up
and maintaining demisting since it
dehumidifies the air. Adjust the controls
as described previously and switch
on the climate control system by
pressing button E. Window demisting
In the event of considerable external
moisture and/or rain and/or large
differences in temperature inside and
outside the passenger compartment,
perform the following preventive
window demisting procedure:
❒
bring cursor B to
;
❒ turn knob A to the red section;
❒ turn knob C to 2 (intermediate fan
speed);
❒ turn knob D to
with the possibility
of moving it to position
if window
misting does not occur.
VENTILATION
To ventilate the passenger
compartment properly, proceed as
follows:
❒ fully open the air diffusers and vents;
❒ turn knob A to the blue section;
❒ bring cursor B to;
❒ turn knob C to the desired speed;
❒ turn knob D to
;
25
24-9-2013 11:49 Pagina 25
Page 29 of 190

INTERNAL AIR
RECIRCULATION
ACTIVATION
Bring cursor B to
.
It is advisable to switch the internal air
recirculation on while standing in
queues or in tunnels to prevent the
introduction of polluted air.
Do not use the function for a long time,
particularly if there are two people on
board, to prevent the windows from
misting.
IMPORTANT The internal air
recirculation system makes it possible
to reach the required heating or
ventilation conditions more quickly. Do
not use the internal air recirculation
function on rainy/cold days to avoid the
possibility of the windows misting.
CLIMATE CONTROL
(cooling)
Proceed as follows:
❒ turn knob A to the blue section;
❒ turn knob C to 1 (1st fan speed). For
rapid cooling, turn knob C to 4
(maximum fan speed).
❒ bring cursor B to;
❒ turn knob D to
;
❒ press button E. Cooling adjustment
Proceed as follows:
❒
bring cursor B to
;
❒ turn knob A toward the red section to
increase the temperature;
❒ turn knob C anticlockwise to reduce
the fan speed.
DOOR MIRROR
DEMISTING
Press the
button F fig. 21 to
activate this function.
Activation is indicated by the digital
warning light on the display.
Press thebutton again to
deactivate the function.
SYSTEM MAINTENANCE
In winter, the climate control system
must be turned on at least once a
month for about 10 minutes. Have the
system inspected at a dedicated Alfa
Romeo Dealership before the summer.
3)
IMPORTANT
3) The system uses R-1234yf
coolant which does not pollute the
environment in the event of
accidental leakage. Under no
circumstances should you use
R-134a fluid which, in addition to
being incompatible with the
system’s components, contributes
greatly to the greenhouse effect.
26
GETTING TO KNOW YOUR CAR
24-9-2013 11:49 Pagina 26
Page 82 of 190
Warning lights onpanel What it means
What to do
greenLEFT DIRECTION INDICATOR
The warning light switches on when the direction
indicator control lever is moved downwards or,
together with the right indicator, when the hazard
warning light button is pressed.greenRIGHT DIRECTION INDICATOR
The warning light turns on when the direction
indicator control lever is moved upwards or,
together with the left indicator, when the hazard
warning light button is pressed.
Warning lights on
panel What it means
What to do
blueMAIN BEAM HEADLIGHTS
The warning light switches on when the main
beam headlights are turned on.
79
24-9-2013 11:49 Pagina 79