Page 440 of 494
.
Audio and Telematics 37
An annual mapping update allows new points of interest to be presented to you. You can also update the Risk areas / Danger areas every month. The detailed procedure is available on: http://citroen.navigation.com.
Or
" Personal ",
Select a category from the list offered.
Select " Search ".
Select a point of interest from the list offered.
Select " Navigate to ".
Page 441 of 494
Audio and Telematics
38
Hazard zone /
Danger zone
alert settings
Press on Navigation to display the primary page.
Press on the secondary page.
Select " Settings ".
Select " Alarm! ".
It is then possible to activate Risk Areas alerts then: - "Audible warning"
- "Alert only when navigating" - "Alert only for overspeed" - "Display speed limits" - Timing: the choice of timing allows the time before giving a Risk Area alert to be defined.
Select " Confirm ".
This series of alerts and displays is only available if Risk Areas have first been downloaded and installed on the system.
T r a f fi c
Traffic information
Display of messages
Press on Navigation to display the primary page.
Press on the secondary page.
Select " Traffic messages ".
Set the:
" On the route ",
" Around ",
" Near destination ", filters to fine-tune the list of messages.
Press again to remove the filter.
Page 442 of 494
.
Audio and Telematics 39
Select the message from the list offered.
Select the magnifying glasses to have vocal information.
S e t t i n g fi l t e r s
Press on Navigation to display the primary page.
Press on the secondary page.
Select " Settings ".
Select " Info options ".
Select: - " Warn of new messages ", - " Speak messages ". Then enter the filter radius.
Select " Confirm ".
We recommend a filter radius of: - 12 miles (20 km) in urban areas, - 30 miles (50 km) on motor ways.
TMC (Traffic Message Channel) messages on GPS-Navigation contain traffic information transmitted in real time.
The TA (Traffic Announcement) function gives priority to TA alert messages. To operate, this function needs good reception of a radio station transmitting this type of message. When a traffic report is transmitted, the current audio source is interrupted automatically to play the TA message. Normal playback of the audio source resumes at the end of the transmission of the message.
Receiving TA messages
Press on Navigation to display the primary page.
Press on the secondary page.
Select " Settings ".
Select " Voice ".
Activate / Deactivate " Tr a f f i c ( TA ) ".
Page 479 of 494
Audio and Telematics
76
The following table groups together the answers to the most frequently asked questions concerning your audio system.
Frequently asked questions
Navigation
QUESTIONANSWERSOLUTION
The route calculation is not successful. The route settings may conflict with the current location (exclusion of toll roads on a toll motor way). Check the route settings in the "Navigation" menu.
The POIs do not appear. The POIs have not been selected. Select the POIs in the list of POIs.
The Hazard zone audible warning does not work. The audible warning is not active. Activate audible warnings in the "Navigation" menu.
The system does not suggest a detour around an incident on the route.
The guidance criteria do not take account of TMC messages. Select the "Traffic info" function in the list of route settings.
I receive a Accident-prone area alert which is not on my route.
Other than guidance, the system announces all Hazard zones positioned in a cone located in front of the vehicle. It may provide an alert for a Hazard zone located on nearby or parallel roads.
Zoom in on the map to view the exact position of the Accident-prone area. Select "On the route" to no longer receive alerts other than navigation instructions or to reduce the time for the announcement.
