2014.5 Citroen C4 DAG transmission

1111
218 
C4-2_en_Chap11_info-pratique_ed01-2014
F On the  front  bumper ,  unclip  the  cover by
  pressing   at   the   bottom.
F
 
Screw
  the   towing   eye   in   fully.
F
 
Install
  the   towing   bar.
Towing your vehicle
F Place the  gear  lever  in  neu -
tral (position N on an elec-
tronic
  or   automatic   gearbox).
Failure to observe this in

-
struction
 
could
 
result
 
in
 
dam
-
age
 
to
 
certain
 
components
 
(braking,

 
transmission...)
 
and
 

the

 
absence
 
of
 
braking
 
as
-
sistance
 
the
 
next
 
time
 
the
 
engine

  is   started. F
 
On
 
the
 
rear
 
bumper
,  
unclip
 
the
 
cover by

  pressing   at   the   bottom.
F
 
Screw
  the   towing   eye   in   fully.
F
 
Install
  the   towing   bar.
F
 
Switch
 
on
 
the
 
hazard
 
warning
 
lamps
 
on

  both   vehicles.
F
 
Move
 
of
f  
gently
,  
drive
 
slowly
 
and
 
for
 
a

  short   distance.
Towing another vehicle
F Unlock the  steering  by  turning  the  key
 in  the  ignition  one  notch  and  re -
lease
  the   parking   brake.
F
 
Switch
 
on
 
the
 
hazard
 
warning
 
lamps
 
on

  both   vehicles.
F
 
Move
 
of
f  
gently
,  
drive
 
slowly
 
and
 
for
 
a

  short   distance.
PRACTICAL INFORMATION

04
254
C4-2_en_Chap13b_RT6_ed01-2014
NAVIGATION - GUIDANCE
Press N AV to   display   the  "
Navigation - guidance "
  menu.
Navigation voice synthesis
Select "Guidance options "   and   confirm.
Adjusting the volume / Deactivation
Select "Set speech synthesis"   and  
confirm. Select

  the   volume   graph   and   confirm.
Select "Deactivate "   to   deactivate   voice   messages.
Select "OK"   and   press   the   dial   to  
confirm. Adjust
  the   volume   to   the   desired   level  
and

  confirm.
The
 
volume   of   messages   can   be   adjusted   during   the   transmission  
of

 
the
 
message   using   the   volume   adjustment   control.
The
 
volume   setting   of   guidance   messages   is   also   accessible   via  
the "

SETUP"   /   "
Voice synthesis"   menu.

05
258
C4-2_en_Chap13b_RT6_ed01-2014
TRAFFIC INFORMATION
Principal TMC symbols
Red and yellow triangle: traffic information, for example:
Black   and   blue   triangle:   general   information,   for   example:
Weather reports
Modified
  signage
Risk
  of   explosion Traffic
  reports
Narrow   carriageway
Road
  closed
Wind
Slippery surface
Demonstration Fog
Accident
Danger
Parking
d

elay
n

o entry Snow
  /   ice
Roadworks
Traffic
  jam
Receiving TA messages
The TA (Traffic  Announcement)   function   gives   priority   to  T A  alert  messages.
 T o   operate,   this   function   needs   good   reception   of   a  
radio

  station   transmitting   this   type   of   message.   When   a   traffic   report  
is

  transmitted,   the   current   audio   source   (Radio,   CD,   USB,   ...)   is  
interrupted

  automatically   to   play   the  
T
A
 
message.   Normal   playback  
of

  the   audio   source   resumes   at   the   end   of   the   transmission   of   the  
message.Press

RADIO   to   display   the   menu.
Select "Service announcements" then
confirm.
Activate
  or   deactivate   "TA"
  then   confirm.
The
  volume   setting   for  
T
A
 
messages   can   be   adjusted   only   during   the  
transmission

  of   this   type   of   alert.
Activate
  or   deactivate   the   function   at   any   time   by   pressing  
the

  button.
During
  a   message,   press   the   button   to   interrupt   it.

04
298
C4-2_en_Chap13c_RD5_ed01-2014
RDS, if displayed, enables you to continue listening to the same station by  automatic   retuning   to   alternative   frequencies.   However,   in   certain conditions,

  coverage   of   an   RDS   station   may   not   be   assured   throughout
 the

  country   as   radio   stations   do   not   cover   100   %   of   the   territory.  
This explains

  the   loss   of   reception   of   the   station   during   a   journey.
AUDIO
RDS
Receiving TA messages
The TA (Traffic  Announcement)   function   gives   priority   to  T A  alert  messages.
 T o   operate,   this   function   needs   good   reception   of   a  
radio

  station   transmitting   this   type   of   message.   When   a   traffic  
report

  is   transmitted,   the   current   audio   source   (Radio,   CD,  
USB,

  ...)   is   interrupted   automatically   to   play   the  
T
A
 
message.  
Normal

  playback   of   the   audio   source   resumes   at   the   end   of   the  
transmission

  of   the   message.
Press TA INFO
 

to   activate   or   deactivate  
the

  reception   of   traffic   messages.
When
  the   radio   is   displayed   on   the  
screen, press

OK   to   display   the  
contextual

  menu.
Select "RDS"   and   confirm   to   save.
"RDS"   is   displayed   in   the   screen.
Make   a   long   press   on  
T
A INFO
to
display   the   list   of   categories.
Receiving INFO messages
The INFO
 function  gives  priority  to  T A alert  messages.  T o  be  active,
 this  function  needs  good  reception  of  a  radio  station  that  
transmits

 
this
 
type
 
of
 
message.
 
When
 
a
 
message
 
is
 
transmitted,
 
the

 
current
 
audio
 
source
 
(Radio,
 
CD,
 
USB, 
...)  
is
 
interrupted
 
automatically

 
to
 
receive
 
the
 
INFO
 
message.
 
Normal
 
play
 
resumes
 
at

 
the
 
end
 
of
 
the
 
message
 
transmission.
Select

  or   deselect   categories   to   activate  
or

  deactivate   the   reception   of   the  
corresponding

  messages.

04
308
C4-2_en_Chap13c_RD5_ed01-2014
AUDIO
Streaming - Playing audio files via
Bluetooth
Depending on the compatibility of the phonePair/connect   the   telephone:   see   the   "USING  
THE
 
TELEPHONE"

  section.
Streaming
  allows   music   files   on   a   telephone   to   be   heard   via   the  
vehicle's

  speakers.
The
  telephone   must   support   the   appropriate   bluetooth   profiles  
(Profiles

 
A2DP 
/  
A
VRCP).
Activate
  the   streaming   source   by   pressing  
SOURCE
or
SRC.
  Control   of   playback   is   via   the   audio   system.  
The
 
contextual

  information   can   be   displayed   in   the   screen.
In
  certain   cases,   playing   of   the   audio   files   must   be   initiated   from   the  
telephone.
The

  audio   quality   depends   on   the   quality   of   the   transmission   from  
the

  telephone.
Play mode
The play modes available are:
-  
Normal:
  the   tracks   are   played   in   order,   depending   on   the  
classification

  of   the   selected   files.
-
 
Random:
  the   tracks   in   an   album   or   folder   are   played   in   a  
random

  order.
-
 
Random
  all:   all   of   the   tracks   saved   in   the   media   are   played   in  
random

  order.
-
 
Repeat:
  the   tracks   played   are   only   those   from   the   current  
album

  or   folder.
Press OK
  for   access   to   the   contextual  
menu.
or
Press

MENU.
Select "Multimedia"
  and   confirm.
Select "Media parameters "
  and  
confirm.
Select "

Read mode"   and   confirm.
Select
  the   desired   play   mode   and  
confirm

  OK   to   save   the   modifications.