2014.5 Citroen C4 DAG lights

27 
C4-2_en_Chap01_controle-de-marche_ed01-2014
Passenger's
airbag system fixed
  in   the  seat
  belt   and  passenger's
  front  
airbag

  warning  
lamps

  display.The
  control   switch,   located  
in

  the   glove   box,   has   been  placed
  in   the   "ON"   position.
The   passenger's   front   airbag  
is

  activated.
In
  this   case,   do   not   install   a  
"rearward

  facing"   child   seat.Move the control switch to the "OFF"
position
  to   deactivate   the   passenger's  front
  airbag.
In
  this   case,   you   can   install   a   "rearward  
facing"

  child   seat.
Warning/indicator lamp
is onCause Action/Observations
Stop & Start fixed.
When
  the   vehicle   stops   (red  
lights,

  traffic   jams,   ...)   the  
Stop

  &   Start   system   has   put  
the

  engine   into   STOP
 
mode.The
  warning   lamp   goes   off   and   the  
engine

  restarts   automatically   in   START
 mode,

  as   soon   as   you   want   to   move   off.
flashes
  for   a   few  
seconds,

  then  
goes

  off.STOP
 

mode   is   temporarily  
unavailable.
or
ST

ART
 
mode   is   invoked  
automatically

.For
  more   information   on   special   cases  
with

  STOP
 
mode   and   START
 
mode,   refer  
to

  the   "Stop   &   Start"   section.
Parking space
sensors fixed.
The
  parking   space   sensors  
function

  is   selected.To
  start   measurement,   operate   the   direction
 indicator

  on   the   side   of   the   space   to   be
 measured,

  and   do   not   exceed   12   mph
 
(20

  km/h).  
A 
message   is   displayed   once   the
 measurement

  has   been   completed.
Automatic
wiping fixed.The   wiper   control   is   pushed  
downwards.
Automatic
  front   wiping   is   activated.
To   deactivate   automatic   wiping,   operate  
the

  control   stalk   downwards   or   put   the  
stalk

  into   another   position.
Lighting dimmer fixed.The   lighting   dimmer   is   making  
an

  adjustment.
You   can   adjust   the   level   of   illumination   of  
the

  instruments   between   1   and   16.
1
MONITORING

22
39 
C4-2_en_Chap02_ecran-multifonction_ed01-2014
F Press the "7" or "8" buttons to set
the  value  required  (15,  30  or  60  sec -
onds),
 
then
 
press
 
the
 
"OK"
button
to
  confirm. F

Press
the "5" or "6" buttons,
then the "OK" button to select the
"OK"  
box
 
and
 
confirm
 
or
 
press
 
the
 
"Back"

  button   to   cancel.
For  
example:
 
setting
 
of
 
the
 
duration
 
of
 
the

  "follow-me-home"   lighting
F
Press
the "7
" or "8 " buttons, to select
the  
"Define
 
the
 
vehicle
 
parameters" menu,

  then   the   "OK"   button.
F
Press the "
5" or "6" buttons to
select  
the
 
"Interior
 
lighting"
 
line,
 
then the

"OK" button; then follow
the  
same
 
procedure
 
to
 
select
 
the
 
"Follow-me-home

  headlamps"   line.
-
 
"Driving

 
assistance":
●
 
"Parking brake
 automatic"  (Automatic electric
 parking  brake;  see  the "Driving"

  section),
● "Rear wipe  in  reverse  gear"  (Rear  wiper
 coupled  to  reverse  gear;  
see the "V

isibility" section),
●
 
"Speeds
 
memorised"
 
(Memorising
 
speeds;

 
see
 
the
 
"Driving"
 
sec
-
tion).
-
 
"V
ehicle  
lighting"
 
(see
 
the
 
"V
isibility"  
section):
●

 
"Directional
 
headlamps"
 
(Main
 
/
 
additional

  directional   lighting),
●
 
"Daytime
 
lights"
 
(Daytime
 
running
 
lamps).
-

 
"Interior
 
lighting"
 
(see
 
the
 
"V
isibility"  
section:
●

 
"Follow-me-home
 
headlamps"
 
(Automatic

 
operation
 
of
 
head
-
lamps
 
after
 
switching
 
of
f  
the
 
igni
-
tion),
●
 
"W
elcome  
lighting"
 
(Exterior
 
and
 
interior

  welcome   lighting).
MULTIFUNCTION SCREENS

22
42 
C4-2_en_Chap02_ecran-multifonction_ed01-2014
Choice of sounds
This 
menu
 
allows
 
you
 
to
 
choose
 
a
 
family

 
of
 
polyphonic
 
sounds
 
from
 
four
 
available.

 
These
 
sounds
 
are
 
grouped
 
together

 
in
 
a
 
family
 
and
 
are
 
adapted
 
to

 
suit
 
the
 
situation
 
and
 
context
 
(alert,
 
confirmation,

 
rejection,
 
direction
 
indica
-
tors,
  lighting   left   on,   key   in   ignition...).
Display configuration
This
 
menu
 
is
 
used
 
to
 
select
 
the
 
colour scheme

 
for
 
the
 
screen,
 
adjust
 
the
 
bright
-
ness,
 
set
 
the
 
date
 
and
 
time
 
and
 
to
 
choose the

 
units
 
for
 
distance
 
(km
 
or
 
miles),
 
fuel consumption

 
(l/100
 
km,
 
mpg
 
or
 
km/l)
 
and temperature

  (°Celsius   or   °Fahrenheit).Adjusting the voice synthesiser
This
 
menu
 
is
 
used
 
to
 
adjust
 
the
 
volume
 
setting

 
for
 
navigation
 
instructions
 
and
 
to

 
choose
 
the
 
type
 
of
 
voice
 
(male
 
or
 

female).
Adjusting the date and time
-

 
Press
  on   SETUP.
-
 
Select
 
"Display
 
configuration"
 
and
 
confirm.
-

 
Select
 
"Set
 
date
 
and
 
time"
 
and
 
con
-
firm.
Select
 
"Minute
 
adjustment
 
via
 
GPS"
 
so
 
that

 
the
 
minutes
 
are
 
adjusted
 
automati
-
cally
  by   satellite   reception.
-
 
Select
 
the
 
setting
 
to
 
modify
.  
Confirm
 
by

 
pressing
 
on
 
OK
,  
then
 
modify
 
the
 
setting

 
and
 
confirm
 
again
 
to
 
save
 
the

  modification.
-
 
Adjust
  the   settings   one   by   one.
-
 
Select
 
"
OK" in the screen then con-
firm
  to   save   the   setting. Choice of language
This
 
menu
 
is
 
used
 
to
 
choose
 
the
 
language used

  by   the   screen   from   a   defined   list.
Vehicle parameters
This
 
menu
 
is
 
used
 
to
 
activate
 
or
 
deac
-
tivate
 
certain
 
driving
 
and
 
comfort
 
sys
-
tems,
  classified   by   category:
-
 
"Driver
  aid":
●
 
"Electric
 
brake*"
 
(Automatic
 
elec
-
tric
 
parking
 
brake;
 
see
 
"Driving"
 
section),
●

 
"Rear
 
wiper"
 
(Rear
 
wiper
 
coupled
 
to

 
reverse
 
gear;
 
see
 
"V
isibility"  
section),
●
 "Speed

 
limits"
 
(Memorising
 
speed settings

 
for
 
the
 
cruise
 
control
 
and speed

 
limiter;
 
see
 
"Driving"
 
section).Alert log
This

 
lists
 
the
 
active
 
alerts
 
by
 
displaying
 
in

 
turn
 
the
 
dif
ferent  
messages
 
associ
-
ated
  with   them.
-
 "V ehicle  access"  (see  "Access"  sec -
tion):
●
 "Driver

 
doors
 
selectivity"
 
(Selective unlocking

  of   the   driver's   door),
●
 
"Rear
 
doors
 
selectivity"
 
(Selective
 
unlocking

 
of
 
the
 
boot
 
using
 
the
 
centre

 
button
 
on
 
the
 
remote
 
con
-
trol;
  see   "Access   section).
-
 
"Driving
 
lights"
 
(see
 
"V
isibility"  
sec
-
tion):
●
 
"Day lights*" (Daytime  running  lamps),
● "Directional headlights"  (Main  /  additional
  directional   lighting).
-
 
"Comfort
 
lighting"
 
(see
 
"V
isibility"  
section):
●

 
"W
elcome  
lights"
 
(Interior
 
wel
-
come
  lighting),
●
 
"Running
 
lights"
 
(Automatic
 
timed
 
operation

  of   headlamps).
*
 
Depending   on   country.
MULTIFUNCTION SCREENS

99
154 
C4-2_en_Chap09_conduite_ed01-2014
STOP & START
The Stop &  Start  system  puts  the  en -
gine  temporarily  into  standby  -  ST OP mode

 
-
 
during
 
stops
 
in
 
the
 
traffic
 
(red
 
lights,

 
traffic
 
jams,
 
or
 
other
...).  
The
 
en
-
gine
 
restarts
 
automatically
 
-
 
ST
ART
 mode

 
-
 
as
 
soon
 
as
 
you
 
want
 
to
 
move
 
of

f.  
The
 
restart
 
takes
 
place
 
instantly
,  
quickly

  and   silently.
Perfect for urban use, the Stop & Start
system
 
reduces
 
fuel
 
consumption
 
and
 
exhaust

 
emissions
 
as
 
well
 
as
 
the
 
noise
 
level

  when   stationary.
Operation
Going into engine STOP mode
The "ECO"  warning  lamp  comes  on in
 the  instrument  panel  and  the  en -
gine
  goes   into   standby   automatically:
- with a manual gearbox,  at  speeds  below
 12  mph  (20  km/h),  or  vehi -
cle
 
stationary
 
with
 
e-THP 130
 
and
 
b
lueH d i
d
iesel versions, when you
put
 
the
 
gear
 
lever
 
into
 
neutral
 
and
 
release

  the   clutch   pedal, If
 
your
 
vehicle
 
is
 
fitted
 
with
 
the

 
system,
 
a
 
time
 
counter
 
calculates

 
the
 
sum
 
of
 
the
 
periods

 
in
 
ST
OP
 mode
 
dur
-
ing  
a
 
journey
.  
It
 
resets
 
itself
 
to
 
zero
 
ev
-
ery  
time
 
the
 
ignition
 
is
 
switched
 
on
 
with
 
the

  key.
-  
with
an electronic gearbox, at a
speed
 
below
 
5
 
mph
 
(8
 
km/h),
 
when
 
you

 
press
 
the
 
brake
 
pedal
 
or
 
put
 
the
 
gear

  lever   into   position   N.With
 
an
 
electronic
 
gearbox,
 
for
 
your

 
comfort
 
during
 
parking
 
maoeuvres,

 
ST
OP
 mode
 
is
 
not
 
available

 
for
 
a
 
few
 
seconds
 
after
 
coming

  out   of   reverse   gear.
STOP
 mode
 
does
 
not
 
af
fect  
the
 
functionality of the vehicle, such
as

 
braking,
 
power
 
steering,
 
for
 
example.Special cases: ST
OP mode
unavailable
STOP
 
mode   is   not   invoked   when:
-  
the
 
vehicle
 
is
 
on
 
a
 
steep
 
slope
 
(up
 
or

  down),
-  
the
  driver's   door   is   open,
-  
the
 
driver's
 
seat
 
belt
 
is
 
not
 
fastened,
-
 
the
 
vehicle
 
has
 
not
 
exceeded
 
6
 
mph
 
(10

 
km/h)
 
since
 
the
 
last
 
engine
 
start
 
using

  the   key,
-  
the
 
electric
 
parking
 
brake
 
is
 
applied
 
or

  being   applied,
-  
the
 
engine
 
is
 
needed
 
to
 
maintain
 
a
 
comfortable

 
temperature
 
in
 
the
 
pas
-
senger   compartment,
-  
demisting
  is   active,
-  
some
 
special
 
conditions
 
(battery
 
charge,

 
engine
 
temperature,
 
brak
-
ing  
assistance,
 
ambient
 
tempera
-
ture...)  
where
 
the
 
engine
 
is
 
needed
 
to

  assure   control   of   a   system.
In this case, the "ECO" warn-
ing  lamp  flashes  for  a  few  sec -
onds,
  then   goes   off.
Never
 
refuel
 
with
 
the
 
engine
 
in
 
ST

OP
 mode;
 
you
 
must
 
switch
 
of
f  the
  ignition   with   the   key.
This operation is perfectly normal.
DRIVING