2014.5 Citroen C4 DAG gearbox

99
147 
C4-2_en_Chap09_conduite_ed01-2014
AUTOMATIC GEARBOX
Six speed automatic  gearbox  which  of -
fers  a  choice  between  the  comfort  of  
fully

 
automatic
 
operation,
 
enhanced
 
by
 
sport

 
and
 
snow
 
programmes,
 
or
 
manu
-
al
  gear   changing.
Four
  driving   modes   are   offered:
-
 
automatic
operation for electronic
management
 
of
 
the
 
gears
 
by
 
the
 
gearbox,
-

 
sport
 
programme
 
for
 
a
 
more
 
dy
-
namic
  style   of   driving,
-
 
snow
 
programme
 
to
 
improve
 
driv
-
ing
  when   traction   is   poor,
-
 
manual
 
operation
 
for
 
sequential
 
changing

  of   the   gears   by   the   driver.
Gear selection gate
1. Gear  lever.
2. b utton "S" (sport).
3.
b utton "T" (snow). P.
 

Park.
-  
Immobilisation
 
of
 
the
 
vehicle,
 
park
-
ing   brake   on   or   off.
-  
Starting
  the   engine.
R.   Reverse.
-  
Reversing
 
manoeuvres,
 
vehicle
 
sta
-
tionary,   engine   at   idle.
N.   Neutral.
-  
Immobilisation
 
of
 
the
 
vehicle,
 
park
-
ing   brake   on.
-  
Starting
  the   engine.
D.  
Automatic
  operation.
M + / -.   
Manual
 
operation
 
with
 
sequen
-
tial   changing   of   the   six   gears.
F  
Press
 
forwards
 
to
 
change
 
up
 
through

  the   gears.
or
F  Press  rearwards  to  change  down  through
  the   gears.
Gear lever
When you move  the  lever  in  the  gate  to
 select  a  position,  the  corresponding  
indicator

 
is
 
displayed
 
in
 
the
 
instrument
 
panel.
P.
 

Park
R. Reverse
N.
n eutral
D.
  Drive   (Automatic   driving)
S. Sport
  programme
T.
  Snow   programme
1 to 6.
  
Gear
 
engaged
 
during
 
manual
 
operation
-.

 
Invalid
 
value
 
during
 
manual
 
operation
Displays in the instrument panel
DRIVING

99
148 
C4-2_en_Chap09_conduite_ed01-2014
Moving off
F With your  foot  on  the  brake,  select  position
P or N.
F
 
Start
  the   engine.
If
 
this
 
procedure
 
is
 
not
 
followed,
 
there
 
is

 
an
 
audible
 
signal,
 
accompanied
 
by
 
a
 
message

  in   the   multifunction   screen.
F
 
With
 
the
 
engine
 
running,
 
press
 
the
 
brake

  pedal.
F
 
Release
 
the
 
parking
 
brake,
 
unless
 
it
 
is

  programmed   to   automatic   mode.
F

Select position
R, D or M.
F
 
Gradually
  release   the   brake   pedal.
The
  vehicle   moves   off   immediately.
If position N
 
is
 
engaged
 
inad
-
vertently
 
while
 
driving,
 
allow
 
the
 
engine

 
to
 
return
 
to
 
idle
 
then
 
en
-
gage
  position   D   to   accelerate.
When
 
the
 
engine
 
is
 
running
 
at
 
idle,

 
with
 
the
 
brakes
 
released,
 
if position

R, D or M
 
is
 
selected,
 
the

 
vehicle
 
moves
 
even
 
without
 
the

  accelerator   being   pressed.
When
 
the
 
engine
 
is
 
running,
 
never

 
leave
 
children
 
in
 
the
 
ve
-
hicle
  without   supervision.
When
 
carrying
 
out
 
maintenance
 
with

 
the
 
engine
 
running,
 
apply
 
the

 
parking
 
brake
 
and
 
select
 
po
-
sition P. A
 message

 
is
 
displayed
 
if
 
you
 
try
 
to
 move
 the  gear  lever  from  position  P
without   pressing   the   brake   pedal.
n

ever select position N while the
vehicle
  is   moving.
n

ever select positions P or R
unless
 
the
 
vehicle
 
is
 
completely
 
stationary

.
Sport and snow programmes
These two special  programmes  supple -
ment  the  automatic  operation  in  very  
specific

  conditions   of   use.
Sport programme "S"
F

Press button
"S",  
after
 
starting
 
the
 
engine.
The

 
gearbox
 
automatically
 
favours
 
a
 
dynamic

  style   of   driving.
S
 
appears
 
in
 
the
 
instrument
 
panel.
Snow programme "

T"
F

Press
button "T",  
after
 
starting
 
the
 
engine.
The

 
gearbox
 
adapts
 
to
 
driving
 
on
 
slip
-
pery
  roads.
This
 
programme
 
improves
 
starting
 
and
 
drive

  when   traction   is   poor.
T
 
appears
 
in
 
the
 
instrument
 
panel.
Return to automatic operation
F At any  time,  press  the  button  select -
ed  again  to  quit  the  programme  en -
gaged
 
and
 
return
 
to
 
auto-adaptive
 
mode.
Automatic operation
F Select position D for automatic
changing   of   the   six   gears.
The
 
gearbox
 
then
 
operates
 
in
 
auto-
adaptive

 
mode,
 
without
 
any
 
intervention
 
on

 
the
 
part
 
of
 
the
 
driver
.  
It
 
continuously
 
selects

 
the
 
most
 
suitable
 
gear
 
accord
-
ing
 
to
 
the
 
style
 
of
 
driving,
 
the
 
profile
 
of
 
the

  road   and   the   load   in   the   vehicle.
For
 
maximum
 
acceleration
 
without
 
touching

 
the
 
lever
,  
press
 
the
 
accelera
-
tor
 
pedal
 
down
 
fully
 
(kick
 
down).
 
The
 
gearbox

 
changes
 
down
 
automatically
 
or

 
maintains
 
the
 
gear
 
selected
 
until
 
the
 
maximum

  engine   speed   is   reached.
On
 
braking,
 
the
 
gearbox
 
changes
 
down
 
automatically

 
to
 
provide
 
efficient
 
engine
 
braking.
If you release the accelerator sharply

,
the
 
gearbox
 
will
 
not
 
change
 
to
 
a
 
higher
 
gear

  for   safety   reasons.
DRIVING

99
149 
C4-2_en_Chap09_conduite_ed01-2014
Manual operation
F Select position M for sequential
changing   of   the   six   gears.
F
 
Push
 
the
 
lever
 
towards
 
the
 
+
 
sign
 
to
 
change

  up   a   gear.
F
 
Pull
 
the
 
lever
 
towards
 
the
 
-
 
sign
 
to
 
change

  down   a   gear.
It
 
is
 
only
 
possible
 
to
 
change
 
from
 
one
 
gear

 
to
 
another
 
if
 
the
 
vehicle
 
speed
 
and
 
engine

 
speed
 
permit;
 
otherwise,
 
the
 
gearbox

 
will
 
operate
 
temporarily
 
in
 
au
-
tomatic
  mode.D
 
disappears
 
and
 
the
 
gears
 
engaged

 
appear
 
in
 
succes
-
sion
  in   the   instrument   panel.
If
 
the
 
engine
 
speed
 
is
 
too
 
low
 
or

 
too
 
high,
 
the
 
gear
 
selected
 
flashes

 
for
 
a
 
few
 
seconds,
 
then
 
the
 
ac
-
tual
  gear   engaged   is   displayed.
It
 
is
 
possible
 
to
 
change
 
from
 
position
 
D

(automatic)
 
to
 
position
 
M
 
(manual)
 
at
 
any

  time.
When
 
the
 
vehicle
 
is
 
stationary
 
or
 
mov
-
ing
 
very
 
slowly
,  
the
 
gearbox
 
selects
 
gear

  M1   automatically.
The
 
sport
 
and
 
snow
 
programmes
 
do
 
not

  operate   in   manual   mode.Invalid value during manual
operation
This  symbol  is  displayed  if  a  
gear

 
is
 
not
 
engaged
 
correctly
 
(selector between two posi

-
tions).
Stopping the vehicle
Before switching  of f  the  engine,  you  can
 engage  position  P or N to place the
gearbox
  in   neutral.
In
 
both
 
cases,
 
apply
 
the
 
parking
 
brake
 
to

 
immobilise
 
the
 
vehicle,
 
unless
 
it
 
is
 
programmed

  to   automatic   mode.
If the lever is not in position P,
when
 
the
 
driver's
 
door
 
is
 
opened
 
or

 
approximately
 
45
 
seconds
 
after

 
the
 
ignition
 
is
 
switched
 
of
f,  
there

 
is
 
an
 
audible
 
signal
 
and
 
a
 
message

  appears.
F

Return
the lever to posi-
tion

P
;  
the
 
audible
 
signal
 
stops

 
and
 
the
 
message
 
dis
-
appears. You
  risk   damaging   the   gearbox:
-
 
if
 
you
 
press
 
the
 
accelera
-
tor
 
and
 
brake
 
pedals
 
at
 
the
 
same

  time,
-
 
if
 
you
 
force
 
the
 
lever
 
from
 
position P

to another position
when
  the   battery   is   flat.
When
 
the
 
ignition
 
is
 
on,
 
the

 
lighting
 
of
 
this
 
warning
 
lamp,

 
accompanied
 
by
 
an
 
audible

 
signal
 
and
 
a
 
message
 
in
 
the
 
multifunction

 
screen,
 
indicates
 
a
 
gear
-
box   malfunction.
In  
this
 
case,
 
the
 
gearbox
 
switches
 
to
 
back-up

 
mode
 
and
 
is
 
locked
 
in
 
3rd
 
gear

.  
Y
ou  
may
 
feel
 
a
 
substantial
 
knock
 
when

 
changing
 
from
 
P
to R  
and
 
from
 
N

to R.  This  will  not  cause  any  damage  to  the
  gearbox.
Do
 
not
 
exceed
 
60
 
mph
 
(100
 
km/h),
 
lo
-
cal
  speed   restrictions   permitting.
Have
 
it
 
checked
 
by
 
a
 
CITROËN
 
dealer
 
or

  a   qualified   workshop.
This
 
warning
 
lamp
 
may
 
also
 
come
 
on
 
if
 
a

  door   is   opened.
Operating fault
To reduce fuel  consumption  when
 stationary  for  long  periods  
with

 
the
 
engine
 
running
 
(traf
-
fic
 
jam...),
 
position
 
the
 
gear
 
le
-
ver at
N  
and
 
apply
 
the
 
parking
 
brake,

 
unless
 
it
 
is
 
programmed
 
in

  automatic   mode.
When
 
driving

 
through

 
flooded

 
roads

 
or

 
crossing

 
a

 
ford,

 
drive

 
at

 
walking

 
speed.
DRIVING

99
150 
C4-2_en_Chap09_conduite_ed01-2014
HILL START ASSIST
System which  keeps  your  vehicle  im -
mobilised  temporarily  (approximately  
2

 
seconds)
 
when
 
starting
 
on
 
a
 
gradi
-
ent,
 
the
 
time
 
it
 
takes
 
to
 
move
 
your
 
foot
 
from

 
the
 
brake
 
pedal
 
to
 
the
 
accelerator
 
pedal.
This

  function   is   only   active   when:
-
 
the
 
vehicle
 
is
 
completely
 
stationary
,  
with

  your   foot   on   the   brake   pedal,
-
 
when
 
certain
 
conditions
 
of
 
gradient
 
are

  met,
-
 
with
  the   driver’s   door   closed.
The hill start assist function cannot be
deactivated. On an ascending slope, with the ve-
hicle stationary, the vehicle is held
for a brief moment when you release
the brake pedal:
-
 
if
 
you
 
are
 
in
 
first
 
gear
 
or
 
neutral
 
with
 
a

  manual   gearbox,
-
 
if
 
you
 
are
 
in
 
position
 
A
or M with an
electronic
  gearbox,
-
 
if
 
you
 
are
 
in
 
position
 
D
or M with an
automatic
  gearbox.
Operation
do not leave the vehicle while it
is  being  held  in  the  hill  start  as -
sist
  phase.
If
 
you
 
need
 
to
 
leave
 
the
 
vehi
-
cle
 
while
 
the
 
engine
 
is
 
running,
 
apply

 
the
 
parking
 
brake
 
manu
-
ally
 
then
 
ensure
 
that
 
the
 
parking
 
brake

 
warning
 
lamp
 
is
 
on
 
(not
 
flashing)

 
in
 
the
 
instrument
 
panel.On a descending slope, with the ve

-
hicle stationary and reverse gear en-
gaged, the vehicle is held for a brief
moment when you release the brake
pedal.Operating fault
If a  fault  occurs  with  the  system,  these  warning
 lamps  come  on.  Contact  a  
CITROËN

 
dealer
 
or
 
a
 
qualified
 
work
-
shop
  to   have   the   system   checked.
DRIVING

99
154 
C4-2_en_Chap09_conduite_ed01-2014
STOP & START
The Stop &  Start  system  puts  the  en -
gine  temporarily  into  standby  -  ST OP mode

 
-
 
during
 
stops
 
in
 
the
 
traffic
 
(red
 
lights,

 
traffic
 
jams,
 
or
 
other
...).  
The
 
en
-
gine
 
restarts
 
automatically
 
-
 
ST
ART
 mode

 
-
 
as
 
soon
 
as
 
you
 
want
 
to
 
move
 
of

f.  
The
 
restart
 
takes
 
place
 
instantly
,  
quickly

  and   silently.
Perfect for urban use, the Stop & Start
system
 
reduces
 
fuel
 
consumption
 
and
 
exhaust

 
emissions
 
as
 
well
 
as
 
the
 
noise
 
level

  when   stationary.
Operation
Going into engine STOP mode
The "ECO"  warning  lamp  comes  on in
 the  instrument  panel  and  the  en -
gine
  goes   into   standby   automatically:
- with a manual gearbox,  at  speeds  below
 12  mph  (20  km/h),  or  vehi -
cle
 
stationary
 
with
 
e-THP 130
 
and
 
b
lueH d i
d
iesel versions, when you
put
 
the
 
gear
 
lever
 
into
 
neutral
 
and
 
release

  the   clutch   pedal, If
 
your
 
vehicle
 
is
 
fitted
 
with
 
the

 
system,
 
a
 
time
 
counter
 
calculates

 
the
 
sum
 
of
 
the
 
periods

 
in
 
ST
OP
 mode
 
dur
-
ing  
a
 
journey
.  
It
 
resets
 
itself
 
to
 
zero
 
ev
-
ery  
time
 
the
 
ignition
 
is
 
switched
 
on
 
with
 
the

  key.
-  
with
an electronic gearbox, at a
speed
 
below
 
5
 
mph
 
(8
 
km/h),
 
when
 
you

 
press
 
the
 
brake
 
pedal
 
or
 
put
 
the
 
gear

  lever   into   position   N.With
 
an
 
electronic
 
gearbox,
 
for
 
your

 
comfort
 
during
 
parking
 
maoeuvres,

 
ST
OP
 mode
 
is
 
not
 
available

 
for
 
a
 
few
 
seconds
 
after
 
coming

  out   of   reverse   gear.
STOP
 mode
 
does
 
not
 
af
fect  
the
 
functionality of the vehicle, such
as

 
braking,
 
power
 
steering,
 
for
 
example.Special cases: ST
OP mode
unavailable
STOP
 
mode   is   not   invoked   when:
-  
the
 
vehicle
 
is
 
on
 
a
 
steep
 
slope
 
(up
 
or

  down),
-  
the
  driver's   door   is   open,
-  
the
 
driver's
 
seat
 
belt
 
is
 
not
 
fastened,
-
 
the
 
vehicle
 
has
 
not
 
exceeded
 
6
 
mph
 
(10

 
km/h)
 
since
 
the
 
last
 
engine
 
start
 
using

  the   key,
-  
the
 
electric
 
parking
 
brake
 
is
 
applied
 
or

  being   applied,
-  
the
 
engine
 
is
 
needed
 
to
 
maintain
 
a
 
comfortable

 
temperature
 
in
 
the
 
pas
-
senger   compartment,
-  
demisting
  is   active,
-  
some
 
special
 
conditions
 
(battery
 
charge,

 
engine
 
temperature,
 
brak
-
ing  
assistance,
 
ambient
 
tempera
-
ture...)  
where
 
the
 
engine
 
is
 
needed
 
to

  assure   control   of   a   system.
In this case, the "ECO" warn-
ing  lamp  flashes  for  a  few  sec -
onds,
  then   goes   off.
Never
 
refuel
 
with
 
the
 
engine
 
in
 
ST

OP
 mode;
 
you
 
must
 
switch
 
of
f  the
  ignition   with   the   key.
This operation is perfectly normal.
DRIVING

99
155 
C4-2_en_Chap09_conduite_ed01-2014
DeactivationGoing into engine START modeAt  
any
 
time,
 
press
 
the
 
"ECO OFF"

switch
  to   deactivate   the   system.
This
 
is
 
confirmed
 
by
 
the
 
switch
 
warning
 
lamp

 
coming
 
on
 
accompanied
 
by
 
the
 
display

  of   a   message.
Special cases: START invoked
automatically
If
 
the
 
system
 
has
 
been
 
deacti
-
vated
 
in
 
ST
OP
 mode,
 
the
 
engine
 
restarts

  immediately.
The
"ECO"
 
warning
 
lamp
 
goes
 
of

f  
and
 
the
 
engine
 
starts
 
auto
-
matically:
-
 
with a manual gearbox
, when you
fully
  depress   the   clutch   pedal,
-
 
with an electronic gearbox
:
●
 gear

 
lever
 
in
 
position
 
A or

M, when
you
  release   the   brake   pedal,
●
 
or
 
gear
 
lever
 
in
 
position
 
N
 
and
 
the
 
brake

 
pedal
 
released,
 
when
 
you
 
move

 
the
 
gear
 
lever
 
to
 
position
 
A

or M,
●
 
or
 
when
 
you
 
engage
 
reverse
 
gear

. For
 
safety
 
reasons
 
or
 
to
 
ensure
 
smooth
 
operation,

 
ST
ART
 mode
 
is
 
invoked
 
au
-
tomatically
  when:
-
 
you
  open   the   driver's   door,
-
 
you
  unfasten   the   driver's   seat   belt,
-
 
the
 
speed
 
of
 
the
 
vehicle
 
exceeds
 
15 

mph  
(25
 
km/h)
 
with
 
a
 
manu
-
al
 
gearbox
 
(3
 
km/h
 
(2
 
mph)
 
with
 

e-THP 130

 
and
 
BlueHDi
 
Diesel
 
ver
-
sions)
 
or
 
7 
mph  
(1
1  
km/h)
 
with
 
an
 
electronic

  gearbox,
-
 
the
 
electric
 
parking
 
brake
 
is
 
being
 
applied,
-

 
some
 
special
 
conditions
 
(battery
 
charge,

 
engine
 
temperature,
 
brak
-
ing
 
assistance,
 
ambient
 
tempera
-
ture...)
 
where
 
the
 
engine
 
is
 
needed
 
to

  assure   control   of   a   system.
In this case the "ECO"
 
warning
 
lamp

 
flashes
 
for
 
few
 
seconds,
 
then

  goes   off.
With
 
a
 
manual
 
gearbox
 
in
 
ST
OP
 mode,

 
if
 
a
 
gear
 
is
 
engaged
 
with
-
out
 
fully
 
depressing
 
the
 
clutch
 
pedal,

 
a
 
warning
 
lamp
 
comes
 
on

 
or
 
an
 
alert
 
message
 
is
 
dis
-
played
 
asking
 
you
 
to
 
depress
 
the

 
clutch
 
pedal
 
to
 
restart
 
the
 
engine.
Reactivation
Press the "ECO OFF" switch again.
The  
system
 
is
 
active
 
again;
 
this
 
is
 
con
-
firmed
 
by
 
the
 
switch
 
warning
 
lamp
 
go
-
ing
  off   and   the   display   of   a   message.
The
 
system
 
is
 
reactivated
 
auto
-
matically
 
at
 
every
 
new
 
start
 
us
-
ing
  the   key.
This operation is perfectly normal.
DRIVING

99
164 
C4-2_en_Chap09_conduite_ed01-2014
The cruise control  system  can -
not,  in  any  circumstances,  re -
place
 
the
 
need
 
to
 
respect
 
speed
 
limits,

 
nor
 
can
 
it
 
replace
 
the
 
need

 
for
 
vigilance
 
on
 
the
 
part
 
of
 
the

  driver.
You
 
are
 
advised
 
to
 
keep
 
your
 
feet

  near   the   pedals   at   all   times.
CRUISE CONTROL
System which automatically  maintains  the
 speed  of  the  vehicle  at  the  value  
programmed

 
by
 
the
 
driver
,  
without
 
any
 
action

  on   the   accelerator   pedal.
The
 
functions
 
of
 
this
 
system
 
are
 
grouped

 
together
 
on
 
the
 
steering
 
mounted

  controls.
1.
 
Cruise
  control   mode   selection   dial.
2.
 
Speed
 
programming
 
/
 
value
 
de
-
crease
  button.
3.
 
Speed
 
programming
 
/
 
value
 
in
-
crease
  button.
4.
 
Cruise
  control   off   /   resume   button.
5.
 
Memorised
  speeds   display   button.
Steering mounted controls
The programmed information  is  grouped
 together  in  the  instrument  
panel

  screen.
6.
  
Cruise
 
control
 
of
f  
/
 
resume
 
indica
-
tion.
7.
  
Cruise
 
control
 
mode
 
selection
 
indi
-
cation.
8.
  
Programmed
  speed   value.
9.
  
Selecting
  a   stored   speed.
Displays in the instrument panel
Operation
The cruise control is switched on
manually:  it  requires  a  minimum  ve -
hicle
 
speed
 
of
 
25
 
mph
 
(40
 
km/h)
 
and
 
engagement

  of:
-
 
fourth
  gear   on   the   manual   gearbox,
-
 
second
 
gear
 
on
 
the
 
electronic
 
gear
-
box
 
system
 
or
 
automatic
 
gearbox,
 
in

  sequential   driving   mode,
-
 
position
 
A
 
on
 
the
 
electronic
 
gearbox
 
system

 
or
 
D
 
on
 
an
 
automatic
 
gear
-
box.
The cruise control is switched off
 
man
-
ually
 
or
 
by
 
pressing
 
the
 
brake
 
or
 
clutch
 
pedal

 
or
 
on
 
triggering
 
of
 
the
 
trajectory
 
control

  systems,   for   safety   reasons.
It
 
is
 
possible
 
to
 
exceed
 
the
 
programmed
 
speed

 
temporarily
 
by
 
pressing
 
the
 
ac
-
celerator
  pedal.
To
 
return
 
to
 
the
 
programmed
 
speed,
 
simply

  release   the   accelerator   pedal.
Switching
 
of
f  
the
 
ignition
 
cancels
 
any
 
programmed

  speed   value.
DRIVING

1010
182 
C4-2_en_Chap10_verification_ed01-2014
Automatic gearbox
The gearbox does  not  re -
quire  any  maintenance  (no  oil  
change).
 Refer

 
to
 
the
 
manufacturer's
 
service

 
schedule
 
for
 
details
 
of
 
the

 
level
 
checking
 
interval
 
for
 
this

  component.
Electric parking brake
This system  does  not  require  any
 routine  servicing.  However ,  
in

 
the
 
event
 
of
 
a
 
problem,
 
have

 
the
 
system
 
checked
 
by
 
a

 
CITROËN
 
dealer
 
or
 
a
 
qualified
 
work
-
shop.
Manual parking brake
Only use  products  recommended by
 CITROËN  or  products  of  equiva -
lent
  quality   and   specification.
In order to  optimise  the  opera -
tion  of  units  as  important  as  
those

 
in
 
the
 
braking
 
system,
 
CITROËN

 
selects
 
and
 
of
fers  
very

  specific   products.
After
 
washing
 
the
 
vehicle,
 
damp
-
ness,
 
or
 
in
 
wintry
 
conditions,
 
ice
 
can

 
form
 
on
 
the
 
brake
 
discs
 
and
 
pads:

 
braking
 
efficiency
 
may
 
be
 
reduced.

 
Make
 
light
 
brake
 
ap
-
plications
 
to
 
dry
 
and
 
defrost
 
the
 
brakes.
If a loss of ef

fectiveness of this
system
 
is

 
noticed,

 
the

 
parking

 
brake

 
must

 
be

 
checked,

 
even

 
between

 
two
 
services.
Checking
 
this

 
system

 
must

 
be

 
done

 
by

 
a

 
CITROËN

 
dealer

 
or

 
a

 
quali

-
fied
 
workshop.
Brake pads
Brake wear  depends  on  the  style
 of  driving,  particularly  in  
the

 
case
 
of
 
vehicles
 
used
 
in
 
town,

 
over
 
short
 
distances.
 
It
 
may

 
be
 
necessary
 
to
 
have
 
the
 
condition

 
of
 
the
 
brakes
 
checked,
 
even
 
between

 
vehicle   services.
Unless
 
there
 
is
 
a
 
leak
 
in
 
the
 
circuit,
 
a
 
drop

 
in

 
the
 
brake
 
fluid
 
level
 
indicates
 
that

 
the
 
brake   pads   are   worn.
Brake disc wear
For information  on  checking  brake
 disc  wear ,  contact  a  
CITROËN

 
dealer
 
or
 
a
 
quali
-
fied
  workshop. For
 
more
 
information,
 
refer
 
to
 
the
 
"Electric parking

  brake   -   Operating   faults"   section.
Manual gearbox
The gearbox
 does  not  re -
quire  any  maintenance  (no  oil  
change).
Refer

 
to
 
the
 
manufacturer's
 
service

 
schedule
 
for
 
the
 
checking

 
interval
 
for
 
this
 
com
-
ponent.
Electronic gearbox
The gearbox  does  not  re -
quire  any  maintenance  (no  oil  
change).
 Refer

 
to
 
the
 
manufacturer's
 
service

 
schedule
 
for
 
details
 
of
 
the

 
checking
 
interval
 
for
 
this
 
component.
CHECKS