12
C4-2_en_Chap01_controle-de-marche_ed01-2014
TWO-TONE INSTRUMENT PANEL WITHOUT AUDIO SYSTEM
Dials and screens
1. Rev counter (x 1 000 rpm or tr/min).
2.
Gear
efficiency
indicator
or
gear
se
-
lector
lever
position
and
gear
for
an
electronic
or automatic gearbox.
3.
Cruise
control
or
speed
limiter
set
-
ting.
4.
Digital
speedometer (mph or km/h).
5.
Engine
oil level indicator. 6.
Service indicator
(miles
or km) then,
total
mileage recorder.
These
two
functions
are
displayed
successively
on
switching
on
the
ignition.
Lighting
dimmer
setting
(when
making
an adjustment).
7.
T
rip
mileage
recorder
(miles
or
km).
8.
Fuel
gauge
and
associated
low
fuel
level
warning
lamp
(
a or b
accord
-
ing
to version).
9.
T
ime.
Control buttons
A. Lighting dimmer (available in night mode).
B.
Reminder
of servicing information
Reset
service
indicator
or
trip
mile
-
age
recorder.
A
and B.
Setting
the
time
and
select
-
ing
units.
1
MONITORING
13
C4-2_en_Chap01_controle-de-marche_ed01-2014
TWO-TONE INSTRUMENT PANEL WITH AUDIO SYSTEM
Dials and screens
A. Lighting dimmer (available in night mode).
B.
Reminder
of
the
servicing
informa
-
tion.
Reset
the
service
indicator
or
the
trip
mileage recorder.
7.
Service
indicator
(miles
or
km)
then,
total
mileage
recorder.
These
two
functions
are
displayed
successively
on
switching
on
the
ig
-
nition.
Lighting
dimmer
setting
(when
mak
-
ing
an
adjustment).
8.
T
rip
mileage
recorder
(miles
or
km).
9.
Fuel
gauge
and
associated
low
fuel
level
warning
lamp
(
a or b
accord
-
ing
to
version).
10.
Range
(miles
or
km)
for
the
remain
-
ing
fuel
(
a)
or
the
AdBlueadditive
and
the
SCR
system
(b)
.
Control buttons
1. Rev counter (x 1 000 rpm or tr/min).
2.
Gear
efficiency
indicator
or
gear
se
-
lector
lever
position
and
gear
for
an
electronic
or automatic gearbox .
3.
Analogue
speedometer
(mph
or
km/h).
4.
Cruise
control
or
speed
limiter
set
-
ting.
5.
Digital
speedometer (mph or km/h).
6.
Engine
oil level indicator.
1
MONITORING
14
C4-2_en_Chap01_controle-de-marche_ed01-2014
CUSTOMISABLE COLOUR INSTRUMENT PANEL WITH AUDIO SYSTEM OR NAVIGATION SYSTEM
1. Rev counter (x 1 000 rpm or tr/min).
2.
Gear
efficiency
indicator
or
gear
se
-
lector
lever
position
and
gear
for
an
electronic
or automatic gearbox.
3.
Analogue
speedometer
(mph
or
km/h).
4.
Cruise
control
or
speed
limiter
set
-
ting.
5.
Digital
speedometer (mph or km/h).
6.
Engine
oil level indicator. A.
Dial COLOUR: customisation of the background
colour of the dials.
B.
Screen
COLOUR:
customisation
of
the
background
colour
of
the
screens.
C.
Lighting
dimmer
(available
in
night
mode).
D.
Reminder
of
the
servicing
informa
-
tion.
Reset
the
service
indicator
or
the
trip
mileage recorder.
Dials and screens
7. Service indicator
(miles
or km) then,
total
mileage recorder.
These
two
functions
are
displayed
successively
on
switching
on
the
ig
-
nition.
Lighting
dimmer
setting
(when
mak
-
ing
an adjustment).
8.
T
rip
mileage
recorder
(miles
or
km).
9.
Fuel
gauge
and
associated
low
fuel
level
warning lamp.
10.
Range
(miles
or
km)
for
the
remain
-
ing
fuel
(
a)
or
the
AdBlueadditive
and
the SCR system (b).
Control buttons
1
MONITORING
19
C4-2_en_Chap01_controle-de-marche_ed01-2014
Warning/indicator lampis onCause Action/Observations
Foot on the
brake pedal fixed.
The
brake pedal is not
pressed.With
an electronic gearbox, press the
brake
pedal to start the engine (lever in
position
N).
If
you wish to release the parking brake
without
pressing the brake pedal, this
warning
lamp will remain on.
flashing. With
an electronic gearbox,
if
you hold the vehicle on
a
rising incline using the
accelerator
for too long, the
clutch
overheats.Use
the brake pedal and/or the electric
parking
brake.
Service
temporarily,
accompanied
by
a
message.One
or more minor faults for
which
there is no specific
warning
lamp have been
detected.Identify
the cause of the fault using the
message
displayed in the screen.
You
can deal with some problems
yourself,
such as a door open or a
discharged
remote control battery.
For
any other problems, such as a fault
with
the tyre under inflation detection
system,
contact a CITROËN dealer or a
qualified
workshop.
fixed,
accompanied
by
a
message.One
or more major faults for
which
there is no specific
warning
lamp have been
detected.Identify
the cause of the fault using the
message
displayed in the screen; you
must
then contact a CITROËN dealer or
a
qualified workshop.
fixed, associated with the flashing and
then
fixed display of
the
service indicator
spanner
.
The servicing interval has been exceeded. Only
on BlueHDi Diesel versions.
Your vehicle must be serviced as soon as
possible.
1
MONITORING
21
C4-2_en_Chap01_controle-de-marche_ed01-2014
Warning/indicator lampis onCause Action/Observations
Foot on the clutch** fixed.In
the STOP
mode of Stop &
Start,
changing to START
mode
is refused because the
clutch
pedal is not fully down.You
must declutch fully to allow the
change
to engine START
mode.
**
Only on the two-tone instrument panel without audio system.
Dynamic
stability control (DSC/ASR) flashing.
Regulation by the system is
active.
The
system optimises traction and
improves
the directional stability of the
vehicle.
fixed, associated with
illumination of
the
indicator lamp
in
the deactivation
button,
accompanied
by
an audible signal
and
a message.
The DSC/ASR or hill start assist system has a fault.Have
it checked by a CITROËN dealer or a
qualified workshop.
Power
steering fixed.The
power steering has a
fault. Drive
carefully at reduced speed.
Have
it checked by a CITROËN dealer or
a
qualified workshop.
Under-inflation fixed.
The
pressure in one or more
wheels
is too low. Check
the pressure of the tyres as soon
as
possible.
This
check should preferably be carried
out
when the tyres are cold.
+ flashing
then
fixed,
accompanied
by the Service warning
lamp. The
tyre pressure monitoring
system
has a fault or no
sensor
is detected on one of
the
wheels. Under-inflation
detection is not assured.
Have
the
system
checked
by
a
CITROËN
dealer
or a qualified workshop.
Directional
headlamps flashing.The
directional headlamps
system
has a fault. Have
it checked by a CITROËN dealer or
a
qualified workshop.
1
MONITORING
24
C4-2_en_Chap01_controle-de-marche_ed01-2014
Warning/indicator lampis onCause Action/Observations
+
+ SCR emissions
control system
(BlueHDi Diesel)
fixed, on switching on
the ignition,
associated
with
the
SERVICE and
engine
diagnostic
warning
lamps,
accompanied
by
an
audible signal
and
a message
indicating
an
emissions
control
fault.
a fault with the SCR
emissions control system has
been
detected. This
alert disappears once the exhaust
emissions
return to normal levels.
flashing, on switching on
the
ignition,
associated
with
the
SERVICE and
engine
diagnostic
warning
lamps,
accompanied
by an
audible
signal and a
message
indicating
the
remaining
driving
range.
The remaining driving range is between 0 and 650 miles
(1
100 km). Contact
a CITROËN dealer or a qualified workshop
without delay, to avoid a
breakdown.
flashing, on switching on
the
ignition,
associated
with
the
SERVICE and
engine
diagnostic
warning
lamps,
accompanied
by an
audible
signal and a
message
indicating
that
starting is
prevented.
You have exceeded the authorised driving limit: the
starting
inhibition system
prevents
starting of the
engine. T
o be able to start the engine, you must
call
on a CITROËN dealer or a qualified
workshop.
1
MONITORING
29
C4-2_en_Chap01_controle-de-marche_ed01-2014
Engine oil level indicator*
The level read will only be cor -
rect if the vehicle is on level
ground
and
the
engine
has
been
of
f for more than 30 minutes.Oil level correct
This
is
indicated
by
the
flashing
of
"
OIL"
or
the
display
of
a
message,
accompa
-
nied
by
the
service
warning
lamp
and
an
audible signal.
If
the
low
oil
level
is
confirmed
by
a
check
using
the
dipstick,
the
level
must
be
topped
up
to
avoid
damage
to
the
engine.
Refer
to the "Checking levels" section.Oil level indicator fault
In the event of a fault with the electric
indicator,
the
oil
level
is
no
longer
moni
-
tored.
If
the
system
is
faulty
,
you
must
check
the
engine
oil
level
using
the
manual
dipstick
located under the bonnet.
Refer to the "Checking levels" section.
Oil level incorrect
This
is
signalled
by
the
flashing
of
"
OIL--" or the display of a message.
Contact
a
CITROËN
dealer
or
a
quali
-
fied workshop.
On
versions
fitted
with
an
electric
oil
level
indicator
,
the
state
of
the
engine
oil
level
is
displayed
in
the
instrument
panel
for
a
few
seconds,
at
the
same
time
as the servicing information.
*
Depending on version.
1
MonIToRInG
30
C4-2_en_Chap01_controle-de-marche_ed01-2014
Service indicator
System that informs the driver when the next
service is due, in accordance with
the
manufacturer's service schedule.
The
point
at
which
the
service
is
due
is
calculated
from
the
last
service
indica
-
tor
zero
reset,
according
to
the
distance
covered
and
the
time
elapsed
since
the
last
service.
For
b lueH d i d iesel versions, the level
of
deterioration
of
the
engine
oil
may
also
be
taken
into
account,
depending
on
the country of sale.
More than 1800 miles (3000 km)
remain before the next service is due
When the ignition is switched on, no service
information appears in the in -
strument
panel central screen.
Between 600 miles (1 000 km) and
1800 miles (3 000 km) remain before
the next service is due
For a few seconds after the ignition is switched
on, the spanner symbolising
the
service
operations
comes
on.
The
distance
recorder
display
line
or
a
spe
-
cific
message
in
the
instrument
panel
central
screen
indicates
the
distance
re
-
maining
before the next service is due.
For example:
1
700
miles
(2
800
km)
remain
before the next service is due.
For
a
few
seconds
after
the
ignition
is
switched
on, the screen indicates:
Less than 600 miles (1 000 km)
remain before the next service is due
Example: 560 miles (900 km) remain before
the next service is due.
For
a
few
seconds
after
the
ignition
is
switched
on, the screen indicates:
A
few
seconds
after
the
ignition
is
switched
on,
the spanner goes off
; the
distance
recorder
resumes
its
normal
operation.
The
screen
then
indicates
the
total
and
trip
distances. A
few
seconds
after
the
ignition
is
switched
on,
the
distance
recorder
resumes
its
normal
operation.
The
spanner remains on
to
indicate
that
a
service
must be carried out soon.
1
MONITORING