2013 TOYOTA iQ EV Owners Manual (in English)

OVERVIEWELECTRIC VEHICLE SYSTEM FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
7
Unlocking operation
NOTE: If a door is not opened within
60 seconds of unlocking, all doors will
relock for safety.
Unlock
Open
Smart Key system
Start function
NOTE: Shift position must be in Park and brake pedal depressed.
Push
Depress brake
pedal
Carrying
Without depressing the brake pedal, pressing the “POWER” switch will change the
operation mode in succession from:
* Driver door unlocking function can be programmed to unlock driver door only, or all doors. Grasping passenger door handle or pushing the unlock button o\
n the back
door opener will unlock all doors.
NOTE: Doors may also be locked/unlocked using remote.
Power (without starting EV System)
Accessories such as the radio will operate.
Power ON; the EV System is not engaged.
All systems OFF.
ACCESSORY
ON
OFF
Back door lock/unlock
Locking operationUnlocking operation*
Carry remote to lock Carry remote to unlock
Grasp
Lock
Unlock
Carry remote
to lock/unlock
Green indicator ON
Touch
While charging with an external power source, the heater/air conditioning can be
operated before getting in the vehicle.
Quick charging inlet
(if equipped)
2013Scion-iQ-EV.indd 71/14/13 6:48 PM

8
Hood release
PullPull up latch and
raise hood
Windshield washer fluid tank
Inverter coolant reservoir
NOTE: Regularly scheduled maintenance will help extend the life of your vehicle and maintain performance. Please refer to the “Warranty &
Maintenance Guide.”
Motor maintenance
Engage support rod
OVERVIEWELECTRIC VEHICLE SYSTEM
Starting the EV System
The Scion iQ EV uses electricity in a rechargeable traction battery to power the
electric motor. The driving range is extended by using regenerative braking to
store electricity in the traction battery. This technology is clean and has a low
impact on the environment by not emitting exhaust such as CO
2 or NOX during
operation.
Tips for reducing battery consumption
-Keep the EV System indicator needle within the ECO or Charge area.
-Drive in D position.
-When possible, avoid driving on steep inclines.
-Avoid driving at speeds that are higher than necessary, especially on the highway.
-When possible, avoid sudden stops to maximize regenerative braking energy.
-Minimize use of Air Conditioning and heating; the seat heater may also be used to
supplement heating.
-Maintain recommended tire pressure and avoid carrying unnecessary luggage.
-Utilize the Remote Climate Control to warm or cool cabin before driving.
Electric Vehicle System
Range Map screen
The estimated driving range based on the amount of remaining battery charge can
be displayed as a reference.
Refer to the Navigation System Owner’s Manual for more details.
2013Scion-iQ-EV.indd 81/14/13 6:48 PM

OVERVIEWELECTRIC VEHICLE SYSTEM FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
9
Windshield washer fluid tank
Inverter coolant reservoir
NOTE: Regularly scheduled maintenance will help extend the life of your vehicle and maintain performance. Please refer to the “Warranty &
Maintenance Guide.”
ELECTRIC VEHICLE SYSTEM
Starting the EV System
The Scion iQ EV uses electricity in a rechargeable traction battery to power the
electric motor. The driving range is extended by using regenerative braking to
store electricity in the traction battery. This technology is clean and has a low
impact on the environment by not emitting exhaust such as CO
2 or NOX during
operation.
Tips for reducing battery consumption
-Keep the EV System indicator needle within the ECO or Charge area.
-Drive in D position.
-When possible, avoid driving on steep inclines.
-Avoid driving at speeds that are higher than necessary, especially on the highway.
-When possible, avoid sudden stops to maximize regenerative braking energy.
-Minimize use of Air Conditioning and heating; the seat heater may also be used to
supplement heating.
-Maintain recommended tire pressure and avoid carrying unnecessary luggage.
-Utilize the Remote Climate Control to warm or cool cabin before driving.
Electric Vehicle System
(1) Depress the brake pedal, and
press the “POWER” switch
while in Park.
(2) After a few seconds the “READY” light comes on.
Range Map screen
The estimated driving range based on the amount of remaining battery charge can
be displayed as a reference.
Refer to the Navigation System Owner’s Manual for more details.
2013Scion-iQ-EV.indd 91/14/13 6:48 PM

10
Charging equipment
Charging connector
Latch release button
CCID (Charging Circuit Interrupting Device)
Plug
Power indicator
Error warning indicator
Test button
Reset button
The charging cable included with the vehicle is designed to be connected only
to an AC 120V power source.
Charging indicator
Charging inlet light
Normal charging inlet
Charging inlet cap
Quick charging inlet (if equipped)
Normal charging cable
Recharge inlet door (charging port lid)
ELECTRIC VEHICLE SYSTEM
Charging
Step 1 Plug the charging cable into the outlet of the external power source.
NOTE: Hanging the CCID on a hook is recommended to reduce the strain on the
outlet and charging cable plug.
Step 2 Press the test button on the CCID to check that the electrical leakage detection function operates properly.
“While-in-use”
cover
The Scion iQ EV may be charged immediately, or scheduled to charge at a specific
time. Before charging, it is recommended that:
-Parking brake is securely set with shift position in “P”
-All lights are turned off
-The POWER switch is OFF
Start charging
2013Scion-iQ-EV.indd 101/14/13 6:48 PM

OVERVIEWELECTRIC VEHICLE SYSTEM FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
11
Charging connector
Latch release button
CCID (Charging Circuit Interrupting Device)
Plug
Power indicator
Error warning indicator
Test button
Reset button
The charging cable included with the vehicle is designed to be connected only
to an AC 120V power source.Charging indicator
Charging inlet light
Normal charging inlet
Charging inlet cap
Quick charging inlet (if equipped)
Normal charging cable
Recharge inlet door (charging port lid)
Charging
Step 1 Plug the charging cable into the outlet of the external power source.
NOTE: Hanging the CCID on a hook is recommended to reduce the strain on the
outlet and charging cable plug.
- Make sure to hold the body of the
plug and insert it firmly into the
outlet.
- Check that the power indicator of the CCID (Charging Circuit
Interrupting Device) is illuminated.
- The surface of the CCID may become hot, but this does not
indicate a malfunction.
Step 2 Press the test button on the CCID to check that the electrical leakage detection function operates properly.
- If the error warning indicator illuminates when test button is
pressed, the function is operating
correctly.
- After the test is completed, press reset button to turn off the error
warning. Charging cannot occur
while error warning is illuminated.
- If the error warning indicator does not come on when test button is
pressed, the function may not be
operating correctly. Stop charging
immediately and contact your
Toyota or Scion dealer.
“While-in-use”
cover
The Scion iQ EV may be charged immediately, or scheduled to charge at a specific
time. Before charging, it is recommended that:
-Parking brake is securely set with shift position in “P”
-All lights are turned off
-The POWER switch is OFF
Start charging
2013Scion-iQ-EV.indd 111/14/13 6:48 PM

12
Step 3 Press the recharge inlet door opener switch to open the recharge inlet

door.
Step 4 Open the charging inlet cap by releasing the clip.
Step 5 Remove the charging connector cap. Affix the cap to the cable.
Push to
open
ELECTRIC VEHICLE SYSTEM
The recharge inlet door will not open
when the “READY” indicator is on or
the power switch is in ON mode.
Step 6 Insert the charging connector into the charging inlet.
Guide
Step 7 Confirm that the charging indicator is illuminated. (When the charging
timer function is in use, the light will turn off several seconds after
illuminating.)
2013Scion-iQ-EV.indd 121/14/13 6:48 PM

OVERVIEWELECTRIC VEHICLE SYSTEM FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
13
Step 3 Press the recharge inlet door opener switch to open the recharge inlet
door.
Step 4 Open the charging inlet cap by releasing the clip.
Step 5 Remove the charging connector cap. Affix the cap to the cable.
The recharge inlet door will not open
when the “READY” indicator is on or
the power switch is in ON mode.
Step 6 Insert the charging connector into the charging inlet.
Guide
- Do not press the latch release
button when inserting the
connector.
- Align the guides and push connector in straight and firmly
until it clicks.
Step 7 Confirm that the charging indicator is illuminated. (When the charging
timer function is in use, the light will turn off several seconds after
illuminating.)
- Charging will not start if the charging indicator does not
illuminate when the charging
connector is inserted.
- The amount of time until charging is completed can be checked on
the Multi-Information Display by
turning the power switch to ON
mode.
- The charging indicator will turn off when charging is completed.
2013Scion-iQ-EV.indd 131/14/13 6:49 PM

14
ELECTRIC VEHICLE SYSTEM
Use of the charging timer can suppress deterioration of the hybrid battery
(traction battery) and off-peak electricity can be used effectively.
Setting the charging timer
Step 1 Stop the vehicle and press the charging timer switch.
Step 2 Press and hold the charging timer switch.
Step 3 Press the charging timer switch to select the setting mode.
Charging timer
The Multi-Information Display will
switch to the charging timer display.
The timing display will change from
solid to flashing.Start time setting mode
Finish time setting mode
The mode will switch with each
press of the charging timer switch.Step 5 Press and hold the charging timer switch.
Step 4 Adjust the set time using the time adjustment button.
Step 6 Turn the POWER switch off.
The charging timer indicator will start flashing.
Step 7 Connect the charging cable to the vehicle.
Check that the charging indicator has come on. It will turn off after several
seconds. If the indicator does not come on, re-insert the charging connector. If it
still does not come on, check the power source status using the power indicator on
the CCID (Charging Circuit Interrupting Device).
2013Scion-iQ-EV.indd 141/14/13 6:49 PM