2013 TOYOTA iQ EV Owners Manual (in English)

OVERVIEWELECTRIC VEHICLE SYSTEM FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
15
Use of the charging timer can suppress deterioration of the hybrid battery
(traction battery) and off-peak electricity can be used effectively.
Setting the charging timer
Step 1 Stop the vehicle and press the charging timer switch.
Step 2 Press and hold the charging timer switch.
Step 3 Press the charging timer switch to select the setting mode.
Step 5 Press and hold the charging timer switch.
Step 4 Adjust the set time using the time adjustment button.
Push knob to adjust hours/minutes
Turn knob to switch between
hours/minutes
Once set, the time display will
change from flashing to solid.
Step 6 Turn the POWER switch off.
The charging timer indicator will start flashing.
Step 7 Connect the charging cable to the vehicle.
Check that the charging indicator has come on. It will turn off after several
seconds. If the indicator does not come on, re-insert the charging connector. If it
still does not come on, check the power source status using the power indicator on
the CCID (Charging Circuit Interrupting Device).
2013Scion-iQ-EV.indd 151/14/13 6:49 PM

16
ELECTRIC VEHICLE SYSTEM
Start time vs. Finish time setting
Either start or finish time can be scheduled (they cannot be scheduled
simultaneously).
Start time setting
mode
Finish time setting
mode
Timer charging finishes when the traction battery is fully charged.
Charging starts at an unspecified time so that the battery will be fully charged
at approximately the scheduled finish time.
Cancelling the charging timer
If the charging timer switch is pressed while the charging timer indicator is
illuminated or flashing, the charging timer function will be canceled. However,
if the charging cable has already been connected to the vehicle, charging will
commence immediately.
The charging timer indicator will
turn off if the schedule is canceled.
Step 1 Pull the charging connector toward you while pressing the latch release button.
Step 2 Attach the charging connector cap.
Step 3 Close the charging inlet cap, and then close the recharge inlet door.
Step 4 Remove the plug from the outlet when the charging equipment will not be used for a long period of time.
After charging
2013Scion-iQ-EV.indd 161/14/13 6:49 PM

17
OVERVIEWELECTRIC VEHICLE SYSTEM FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURESStart time vs. Finish time setting
Either start or finish time can be scheduled (they cannot be scheduled
simultaneously).
Start time setting
mode
Finish time setting
mode
Timer charging finishes when the traction battery is fully charged.
Charging starts at an unspecified time so that the battery will be fully charged
at approximately the scheduled finish time.
Cancelling the charging timer
If the charging timer switch is pressed while the charging timer indicator is
illuminated or flashing, the charging timer function will be canceled. However,
if the charging cable has already been connected to the vehicle, charging will
commence immediately.
The charging timer indicator will
turn off if the schedule is canceled.
Step 1 Pull the charging connector toward you while pressing the latch release button.
Step 2 Attach the charging connector cap.
Step 3 Close the charging inlet cap, and then close the recharge inlet door.
- Hold the body of the plug while removing.
- Make sure to put the cable away immediately after disconnecting.
- When leaving the plug inserted, check the plug and connector once a month
for accumulation of dirt or dust.
Step 4 Remove the plug from the outlet when the charging equipment will not be
used for a long period of time.
After charging
2013Scion-iQ-EV.indd 171/14/13 6:49 PM

18
ELECTRIC VEHICLE SYSTEM
Remaining charging time Charging information is displayed on the
Multi-Information Display.
If the POWER switch is turned to ON mode during charging, the estimated amount
of time needed for charge completion will be displayed.
After confirming, switch the POWER switch to OFF to turn off the display. The
POWER switch will turn off automatically after approximately two minutes.
Multi-Information Display-Charging
information
Charging information and warning messages The first time the POWER switch is
turned to ON mode after charging is completed, a message detailing the results
of the charge is shown. Also, if an operation that cannot be carried out during
charging was attempted, a warning message will be shown.
Remote Climate Control
While charging with an external power source, the heater or Air Conditioning
can be operated before getting in the vehicle. If the Air Conditioning system is
remotely activated while charging, charging will stop but resume when the Air
Conditioning system goes off.
Before leaving the vehicle
The Remote Climate Control will operate in accordance with the temperature
settings of the Air Conditioning system, so be sure to check the settings before
leaving the vehicle.
Activating the Remote Climate Control
- Press and hold the “” button.
- The system will shut off if a door is opened. The system can be stopped by
pressing the “
” button twice.
2013Scion-iQ-EV.indd 181/14/13 6:49 PM

19
OVERVIEWELECTRIC VEHICLE SYSTEM FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
Remaining charging time Charging information is displayed on the
Multi-Information Display.
If the POWER switch is turned to ON mode during charging, the estimated amount
of time needed for charge completion will be displayed.
After confirming, switch the POWER switch to OFF to turn off the display. The
POWER switch will turn off automatically after approximately two minutes.
Multi-Information Display-Charging
information
Charging information and warning messages The first time the POWER switch is
turned to ON mode after charging is completed, a message detailing the results
of the charge is shown. Also, if an operation that cannot be carried out during
charging was attempted, a warning message will be shown.
While charging with an external power source, the heater or Air Conditioning
can be operated before getting in the vehicle. If the Air Conditioning system is
remotely activated while charging, charging will stop but resume when the Air
Conditioning system goes off.
The Remote Climate Control will operate in accordance with the temperature
settings of the Air Conditioning system, so be sure to check the settings before
leaving the vehicle.
- Press and hold the “
” button.
- The system will shut off if a door is opened. The system can be stopped by
pressing the “
” button twice.
2013Scion-iQ-EV.indd 191/14/13 6:49 PM

20
* The power switch must be in the “ON” mode and the brake pedal depressed to
shift from Park.
Downshifting increases power going uphill, or provides regenerative braking
downhill. For best power economy during normal driving conditions, always drive
with the shift lever in the “D” position.
FEATURES/OPERATIONS
Transmission
Parking brake
ELECTRIC VEHICLE SYSTEM
In the unlikely event that the electrical leakage detection function is not
operating properly, contact your Toyota or Scion dealer as soon as possible.
Check that it is operating properly by following the procedure below.
Step 1 Insert the charging cable into the outlet of the external power source.
Step 2 Press the test button on the CCID (Charging Circuit Interrupting Device).
If the error warning indicator
illuminates when the test button
is pressed, the function is
operating correctly.
Step 3 Press the reset button on the CCID (Charging Circuit Interrupting Device).
Check that the error warning indicator turns off. Charging cannot be carried out
while the error warning indicator is illuminated.
Charging can be continued by following the normal procedure. Store the charging
cable when not in use.
See the Owner’s Manual for important precautionary information.
Inspecting electrical leakage
detection function
2013Scion-iQ-EV.indd 201/14/13 6:49 PM

OVERVIEWELECTRIC VEHICLE SYSTEM FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
21
* The power switch must be in the “ON” mode and the brake pedal depressed to
shift from Park.
Downshifting increases power going uphill, or provides regenerative braking
downhill. For best power economy during normal driving conditions, always drive
with the shift lever in the “D” position.
FEATURES/OPERATIONS
Transmission
Parking brake
Pull(2) Push
(1) Pull slightly
(3) Lower
Park*
Reverse
Neutral
Drive
P
R
N
D
N
SRegenerative brake
Maximum
regenerative brakeB
Release
Set
In the unlikely event that the electrical leakage detection function is not
operating properly, contact your Toyota or Scion dealer as soon as possible.
Check that it is operating properly by following the procedure below.
Step 1 Insert the charging cable into the outlet of the external power source.
Step 2 Press the test button on the CCID (Charging Circuit Interrupting Device).
Step 3 Press the reset button on the CCID (Charging Circuit Interrupting Device).
Check that the error warning indicator turns off. Charging cannot be carried out
while the error warning indicator is illuminated.
Charging can be continued by following the normal procedure. Store the charging
cable when not in use.
See the Owner’s Manual for important precautionary information.
2013Scion-iQ-EV.indd 211/14/13 6:49 PM

Windshield wipers & washers
Front
Rear
Lights & turn signals
Turn signals
Headlights
Headlights
Parking lights
22
FEATURES/OPERATIONS
Seat adjustments-Front
Seat position (forward/backward)
Seatback angle
Seat-Folding down rear seat
(2) Push
Passenger
seat only
(1) Stow the seat belt buckles(3) Remove (4) Fold down
2013Scion-iQ-EV.indd 221/14/13 6:49 PM