2013 TOYOTA iQ EV reset

2
OVERVIEW
Instrument panel
Power outside rearview mirror controls
Headlight and turn signal controls
Steering wheel audio controls*
Wiper and washer controls
Front passenger occupant classification indicator/
Front passenger seat belt reminder light
Emergency flasher button
Navigation system*
Air Conditioning controls
HWD (Heated Windshield Defroster) switch
Rear window defogger button
Charging timer switchRecharge inlet door opener switch
AUX port/USB port*
Door lock switch
Seat heater switches
Power outlet
Power switch
Tilt steering lock release
Tire Pressure Monitoring (warning) System reset button
Hood release
* For details, refer to the “Navigation System Owner’s Manual.”
2013Scion-iQ-EV.indd 21/14/13 6:42 PM

OVERVIEWELECTRIC VEHICLE SYSTEM FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
3
Power outside rearview mirror controls
Headlight and turn signal controls
Steering wheel audio controls*
Wiper and washer controls
Front passenger occupant classification indicator/
Front passenger seat belt reminder light
Emergency flasher button
Navigation system*
Air Conditioning controls
HWD (Heated Windshield Defroster) switch
Rear window defogger button
Charging timer switchRecharge inlet door opener switch
AUX port/USB port*
Door lock switch
Seat heater switches
Power outlet
Power switch
Tilt steering lock release
Tire Pressure Monitoring (warning) System reset button
Hood release
* For details, refer to the “Navigation System Owner’s Manual.”
2013Scion-iQ-EV.indd 31/14/13 6:42 PM

10
Charging equipment
Charging connector
Latch release button
CCID (Charging Circuit Interrupting Device)
Plug
Power indicator
Error warning indicator
Test button
Reset button
The charging cable included with the vehicle is designed to be connected only
to an AC 120V power source.
Charging indicator
Charging inlet light
Normal charging inlet
Charging inlet cap
Quick charging inlet (if equipped)
Normal charging cable
Recharge inlet door (charging port lid)
ELECTRIC VEHICLE SYSTEM
Charging
Step 1 Plug the charging cable into the outlet of the external power source.
NOTE: Hanging the CCID on a hook is recommended to reduce the strain on the
outlet and charging cable plug.
Step 2 Press the test button on the CCID to check that the electrical leakage detection function operates properly.
“While-in-use”
cover
The Scion iQ EV may be charged immediately, or scheduled to charge at a specific
time. Before charging, it is recommended that:
-Parking brake is securely set with shift position in “P”
-All lights are turned off
-The POWER switch is OFF
Start charging
2013Scion-iQ-EV.indd 101/14/13 6:48 PM

OVERVIEWELECTRIC VEHICLE SYSTEM FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
11
Charging connector
Latch release button
CCID (Charging Circuit Interrupting Device)
Plug
Power indicator
Error warning indicator
Test button
Reset button
The charging cable included with the vehicle is designed to be connected only
to an AC 120V power source.Charging indicator
Charging inlet light
Normal charging inlet
Charging inlet cap
Quick charging inlet (if equipped)
Normal charging cable
Recharge inlet door (charging port lid)
Charging
Step 1 Plug the charging cable into the outlet of the external power source.
NOTE: Hanging the CCID on a hook is recommended to reduce the strain on the
outlet and charging cable plug.
- Make sure to hold the body of the
plug and insert it firmly into the
outlet.
- Check that the power indicator of the CCID (Charging Circuit
Interrupting Device) is illuminated.
- The surface of the CCID may become hot, but this does not
indicate a malfunction.
Step 2 Press the test button on the CCID to check that the electrical leakage detection function operates properly.
- If the error warning indicator illuminates when test button is
pressed, the function is operating
correctly.
- After the test is completed, press reset button to turn off the error
warning. Charging cannot occur
while error warning is illuminated.
- If the error warning indicator does not come on when test button is
pressed, the function may not be
operating correctly. Stop charging
immediately and contact your
Toyota or Scion dealer.
“While-in-use”
cover
The Scion iQ EV may be charged immediately, or scheduled to charge at a specific
time. Before charging, it is recommended that:
-Parking brake is securely set with shift position in “P”
-All lights are turned off
-The POWER switch is OFF
Start charging
2013Scion-iQ-EV.indd 111/14/13 6:48 PM

20
* The power switch must be in the “ON” mode and the brake pedal depressed to
shift from Park.
Downshifting increases power going uphill, or provides regenerative braking
downhill. For best power economy during normal driving conditions, always drive
with the shift lever in the “D” position.
FEATURES/OPERATIONS
Transmission
Parking brake
ELECTRIC VEHICLE SYSTEM
In the unlikely event that the electrical leakage detection function is not
operating properly, contact your Toyota or Scion dealer as soon as possible.
Check that it is operating properly by following the procedure below.
Step 1 Insert the charging cable into the outlet of the external power source.
Step 2 Press the test button on the CCID (Charging Circuit Interrupting Device).
If the error warning indicator
illuminates when the test button
is pressed, the function is
operating correctly.
Step 3 Press the reset button on the CCID (Charging Circuit Interrupting Device).
Check that the error warning indicator turns off. Charging cannot be carried out
while the error warning indicator is illuminated.
Charging can be continued by following the normal procedure. Store the charging
cable when not in use.
See the Owner’s Manual for important precautionary information.
Inspecting electrical leakage
detection function
2013Scion-iQ-EV.indd 201/14/13 6:49 PM

OVERVIEWELECTRIC VEHICLE SYSTEM FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
21
* The power switch must be in the “ON” mode and the brake pedal depressed to
shift from Park.
Downshifting increases power going uphill, or provides regenerative braking
downhill. For best power economy during normal driving conditions, always drive
with the shift lever in the “D” position.
FEATURES/OPERATIONS
Transmission
Parking brake
Pull(2) Push
(1) Pull slightly
(3) Lower
Park*
Reverse
Neutral
Drive
P
R
N
D
N
SRegenerative brake
Maximum
regenerative brakeB
Release
Set
In the unlikely event that the electrical leakage detection function is not
operating properly, contact your Toyota or Scion dealer as soon as possible.
Check that it is operating properly by following the procedure below.
Step 1 Insert the charging cable into the outlet of the external power source.
Step 2 Press the test button on the CCID (Charging Circuit Interrupting Device).
Step 3 Press the reset button on the CCID (Charging Circuit Interrupting Device).
Check that the error warning indicator turns off. Charging cannot be carried out
while the error warning indicator is illuminated.
Charging can be continued by following the normal procedure. Store the charging
cable when not in use.
See the Owner’s Manual for important precautionary information.
2013Scion-iQ-EV.indd 211/14/13 6:49 PM