2013 TOYOTA HIGHLANDER HYBRID Owners Manual

Page 177 of 676

TOYOTA HIGHLANDER HYBRID 2013 XU50 / 3.G Owners Manual 177
2-1. Driving procedures
2
When driving
CAUTION
●
Do not shift the shift lever to P while the vehicle is moving.
Doing so can damage the transmission and may result in a loss of vehicle\
control

Page 178 of 676

TOYOTA HIGHLANDER HYBRID 2013 XU50 / 3.G Owners Manual 178 2-1. Driving procedures
CAUTION
●Do not drive in excess of the speed limit. Even if the legal speed limit per-
mits it, do not drive over 85 mph (140 km/h) unless your vehicle has high-
speed ca

Page 179 of 676

TOYOTA HIGHLANDER HYBRID 2013 XU50 / 3.G Owners Manual 179
2-1. Driving procedures
2
When driving
CAUTION
●
Avoid revving or racing the engine.
Running the engine at high speed while the vehicle is stopped may cause
the exhaust system to overheat, which

Page 180 of 676

TOYOTA HIGHLANDER HYBRID 2013 XU50 / 3.G Owners Manual 180 2-1. Driving procedures
CAUTION
■Exhaust gases
Exhaust gases include harmful carbon monoxide (CO) that is colorless and
odorless. Inhaling exhaust gases may lead to death or a serious health haz

Page 181 of 676

TOYOTA HIGHLANDER HYBRID 2013 XU50 / 3.G Owners Manual 181
2-1. Driving procedures
2
When driving
CAUTION
■
If the vehicle becomes stuck or bogged
Do not spin the wheels recklessly when any of the tires is up in the air, or
stuck in sand or mud etc. Thi

Page 182 of 676

TOYOTA HIGHLANDER HYBRID 2013 XU50 / 3.G Owners Manual 182 2-1. Driving procedures
NOTICE
■Avoiding damage to vehicle parts
●Do not turn the steering wheel fully in either direction and hold it there for
an extended period of time. 
Doing so may damag

Page 183 of 676

TOYOTA HIGHLANDER HYBRID 2013 XU50 / 3.G Owners Manual 183
2-1. Driving procedures
2
When driving
Power (ignition) switch (vehicles with smar t key system)
Performing the following operations when carrying the electronic
key on your person starts the hybr

Page 184 of 676

TOYOTA HIGHLANDER HYBRID 2013 XU50 / 3.G Owners Manual 184 2-1. Driving procedures
■Changing “POWER” switch modes
Modes can be changed by pres sing the “POWER” switch with
the brake pedal released. (The mode changes each time the
switch is press