12-174610-01
Oil Change ▶
Open the power fluid reservoir cap and drain
the fluid completely with oil suction device. To
make it easy, turn the steering wheel to its
both ends several times.
Fill up the specified fluid into fluid reservoir
and bleed air from the steering system. 1.
2. Oil Level Check ▶
Place the vehicle on a level ground and start
the engine and let it run at idle speed.
Turn the steering wheel several times so that
the oil temperature reaches to normal
operating level (75~85˚C).
Place the steering wheel at straight ahead
direction.
Check the oil level in the power steering oil
reservoir. Adjust the oil level between MAX
and MIN. 1.
2.
3.
4.
If the difference between two measurements
is below 5 mm and the level is between MAX
and MIN level, it's normal. If it is over 5 mm,
bleed air from the system. Check the fluid level on a level ground with the
engine turned off. The fluid level should be
between the MIN and MAX marks on the
reservoir cap gauge.
below 5 mm
Engine idling Engine running
Oil typeS-PSF-3
Capacityapprox. 1ℓ (including
reservoir)
13-34620-01
1. SPECIFICATIONS
Item Item Specification
SSPS solenoid valveRated voltage DC 12 V
Rated voltage 1.0 A
Resistance6.7 ±1 Ω
Power steering oil pump
(with SSPS)Operating temperature-40℃~150℃
Release pressure 90 bar
Displacement 9.3 cc/rev
Flow velocity 9.75~6 l/mn
Pulley sizeØ115
Pulley type 6 groove
Housing material Aluminium
Power steering fluid reservoir
(with SSPS)Fracture pressuremin 8kgf/㎠
Air leakage2 kgf/㎠×min
Cap open torque 9.8 to 14.2 Nm
Oil capacity FULL 550cc
Power steering gear box
(with SSPS)Gear type Rack & pinion type
Gear ratio 40.245
Fixed rack 3.78
Gear weight 12.800 kg
Steering angleInner36.2°
Outer32.4°