2013 SKODA OCTAVIA Swing Car Radio Manual

service interval reset tire pressure seats gas tank size jump start wheel bolts

Page 17 of 45

SKODA OCTAVIA 2013 3.G / (5E) Swing Car Radio Manual Update Bluetooth®
firmware
First read and observe the introductory information given on page 11.
Due to a continuous technological developments, there may be a problem con-
necting some telephones w

Page 18 of 45

SKODA OCTAVIA 2013 3.G / (5E) Swing Car Radio Manual Audio
Radio
Introduction
This chapter contains information on the following subjects:
Main menu
16
Find and store radio station
16
Select frequency band and radio station
17
Switching traffic progr

Audio
Radio
Introduction
This chapter contains information on the following subjects:
Main menu
16
Find and store radio station
16
Select frequency band and radio station
17
Switching traffic programme TP on/off
18
First and foremost, pay attention to the safety instructions » page 4 , Important
notes .
The device allows reception of radio stations in from FM or AM frequency ranges
as well as additional information from RDS broadcasts in the FM range.

Main menu
First read and observe the introductory information given on page 16.
Accessing radio mode in main menu
›
Press the RADIO button.
The most recently tuned radio station plays.
Symbols in the display
SymbolMeaningSound is mutedTraffic information station Station without traffic information ,  ,  , Currently selected frequency band and memory group a)Radio station is selected based on desired station top-
ic » page 12 , Radio settingsSymbolMeaningRadio station from the station list is a station from the
preset list Auto-play function for available radio stations for 10 sec-
ondsa)
PTY (programme type) - Refers to the type of the programme transmitted by the radio station.

Find and store radio station
First read and observe the introductory information given on page 16.
If no memory group is displayed for the frequency bands,
›
press the RADIO button
→ menu button
2
» Fig. 1 on page 5.
Station searches are affected by selection of the PTY filter » page 12 and by
switching on/off of the TP function.
Search options
■ TP - Switches traffic programme on/off » page 18
■ Manual - Manual station search
■ Scan - Successive play of all receivable stations in the current frequency band or
the current station buttons for five seconds each ■ OK - Stops auto-play function at the current radio station
■ Skip - Selects another radio station
■ Auto store - Automatic station search
Manual station search
Pressing the Manual button starts a manual station search.
Manual tuning is performed by turning the menu button
2
» Fig. 1 on page 5 or
the keys  .
Pressing the OK button stops the manual station search at the currently tuned
radio station.
Automatic station search
Pressing the Auto store key starts an automatic station search.
Auto store... is displayed on the device display screen when searching and stor-
ing.
At the end of the automatic search, the five radio stations with the strongest sig- nal are stored in the memory group for the current frequency band. 
16Audio

Page 19 of 45

SKODA OCTAVIA 2013 3.G / (5E) Swing Car Radio Manual If some radio stations have already been stored under the station buttons, then
these station buttons will be overwritten with newly located stations after the
automatic station search.
Store station

If some radio stations have already been stored under the station buttons, then
these station buttons will be overwritten with newly located stations after the
automatic station search.
Store station
Set the desired radio station and press and hold the corresponding key 3
» Fig. 1
on page 5 until a beep is heard. The station is stored in the device memory and its
name appears above the corresponding key
3
.

Select frequency band and radio station
Fig. 7
Main menu/selecting the frequency band
First read and observe the introductory information given on page 16.
Selecting a frequency band
The device can receive the frequencies FM (memory groupsFM1 and FM2) and AM
(memory groupsAM1 and AM2).
Pressing the RADIO button and the corresponding key
→ 3 » Fig. 1 on page 5 of
the storage group
or
repeatedly pressing the RADIO
button switches the device between each memory
group changes.
Press the menu button
2
to confirm the selected memory group.
Select radio stations
Depending on the Arrow keys » page 12 , Radio settings settings, the device sets
to a radio station in the current frequency range from the following list:
■ List of available stations
■ List of stations stored in the device memory
Briefly pressing the button 
or  switches the device to the previous or next
radio station.
Pressing and holding the button 
or  starts a search in the selected direction
and stops at the next radio station
or
turning the menu button
2
» Fig. 1 on page 5 switches the device to the previous
or next radio station.
Pressing menu button
2
selects the set station.
Five presets are available in each memory group. The station name and programme type transmitted by the radio station according
to PTY 1)
is displayed.
If the station is stored in the device memory, then the symbol 
is also displayed.
The unit will automatically search for radio stations if no list of available stations
is present.
1)
PTY (programme type) - Refers to the type of the programme transmitted by the radio station.
17Audio

Page 20 of 45

SKODA OCTAVIA 2013 3.G / (5E) Swing Car Radio Manual Switching traffic programme TP on/offFirst read and observe the introductory information given on page 16.
Some radio stations transmit traffic information. The device is capable of trans-
mitting the

Switching traffic programme TP on/offFirst read and observe the introductory information given on page 16.
Some radio stations transmit traffic information. The device is capable of trans-
mitting these traffic reports.
›
Press the RADIO button
→ menu button
2
» Fig. 1 on page 5 → TP.
Screen display
Availability of traffic monitoring is shown on the display by the symbol  in con-
junction with the station name (for example, from the station or preset lists).
If the radio station does not broadcast traffic reports, or if no traffic stations can
be found (due to a general radio reception interruption, for example), then the
symbol  
is displayed.
If the set radio station does not support traffic reports, 
then an appropriate sta-
tion is automatically set in the background 
to enable traffic reports to be contin-
uously received.
The device functions in the same way for the selected 
frequency range.
While playing in Media mode, the last selected radio station continues to be re-
ceived in the background if it supports traffic information.
Interrupting/stopping the traffic programme When the traffic programme is being received, Traffic announcement is displayed
on the device display screen with the following options:
■ TP off - Ends the traffic announcement currently being played
■ Cancel - Switch off the traffic programme function

Media

Introduction
This chapter contains information on the following subjects:
Select source
19
Sources and file formats supported
19
Operation
20
Setting additional functions
21CD21SD memory card22
Bluetooth ®
player
22
USB and AUX inputs
23
First and foremost, pay attention to the safety instructions » page 4 , Important
notes .
The device allows you to play audio files in various formats and to connect differ-
ent source types » page 19.
When the source has been connected, the device starts to automatically play au- dio files in alphabetical order.
WARNING■ Never place external sources on the console panel. They could be thrown in-
to the passenger compartment during sudden driving manoeuvres, thereby in-
juring the occupants.■
Never place external sources close to the airbags. They could be thrown into
the passenger compartment when the airbags are deployed, injuring the oc-
cupants.
■
Never hold external sources in your hand or on your knees while driving.
They could be thrown into the passenger compartment during sudden driving
manoeuvres, thereby injuring the occupants.
■
Always route the connection cable for the external source such that it does
not restrict you when driving.
CAUTION
Do not store any important data on CDs, Bluetooth ®
players, SD memory cards or
connected external sources. ŠKODA assumes no responsibility for lost or dam-
aged files or connected devices.
Note
See the owner's manual of the specific manufacturer for instructions on operat-
ing the external source.
18Audio

Page 21 of 45

SKODA OCTAVIA 2013 3.G / (5E) Swing Car Radio Manual Select sourceFig. 8
Main menu/CD mode
First read and observe the introductory information and safety warn-
ings
on page 18.
Accessing main menu in media mode
›
Press the button MEDIA.
Selecting

Page 22 of 45

SKODA OCTAVIA 2013 3.G / (5E) Swing Car Radio Manual The name of the artist, the album and the title of the played file can be displayed
if the information is available as a so-called ID3 tag. If no ID3 tag is available, only the folder name is displaye

The name of the artist, the album and the title of the played file can be displayed
if the information is available as a so-called ID3 tag. If no ID3 tag is available, only the folder name is displayed.
To ensure good quality sound, we recommend a minimum compressed bitrate of
160 kb/s for MP3 files. For audio files with variable bitrates, the indicated remain-
ing playback time does not correspond to the actual remaining playback time.
WMA files can only be played when not copyrighted by DRM. These kinds of WMAfiles are not supported by the device.
The more files, folders or playlists on one source, the longer it will take to read
the source. It is a good idea to create subfolders with files (e.g. by artist or album
names) in order to save time.
Source propertiesSpecifications
for USB sour-
cesUSB 1.x and 2.x or higher with support for USB 2.x
(data transfer speed then corresponds to the maximum speed of USB 2.x)
Max. speed of 480 Mb/s
File system
SD memory
cardFAT16, VFAT, FAT32, exFatUSB devicesFAT16, VFAT, FAT32CDISO9660, Joliet (Level 1,2,3), UDF 1.x, UDF 2.xSpecification
for the Blue-
tooth ®
audio
source
Profile A2DP, AVRCP
File properties
Bitratemax. 320 kb/sSampling ratemax. 48 kHz

Operation
First read and observe the introductory information and safety warn-
ings
on page 18.
The  and  buttons always affect the audio source currently being listened to,
regardless of the menu being used.
It is also possible to change tracks using the keys
3
» Fig. 1 on page 5 from with-
in the menu of the audio source currently being played.
A list of keys 3 is displayed in the menu of the audio source currently being
played after the menu button 2 is turned.
■ Play - Plays the current track
■ Up - Returns to a higher level
Press menu button 2
to start playback of the current track or to open the cur-
rent folder.
Button 
ActionFunction
Press briefly
Go to the start of the track being played if the track
has been playing for more than 3 secondsGo to the start of the previous track if the track has been playing for less than 3 secondsPress and hold buttonFast-reverse of the track
Button 
ActionFunctionPress brieflyGo to the start of the next trackPress and hold buttonFast-forward of the track
Button

/
ActionFunction
Press briefly
Play/pause: the play function is stopped at the cur-
rent position and the symbol changes to  - after re-
pressing, the play function will continue from this position.
Button 
ActionFunction
Press briefly
Go to the start of the track being played if the track
has been playing for more than 3 secondsGo to the start of the previous track if the track has been playing for less than 3 secondsPress and hold buttonFast-reverse of the track
Button 
ActionFunctionPress brieflyGo to the start of the next trackPress and hold buttonFast-forward of the track 20Audio

Page 23 of 45

SKODA OCTAVIA 2013 3.G / (5E) Swing Car Radio Manual Button ActionFunctionPress brieflyScrolling down in folders
Button 
ActionFunctionPress brieflyScrolling up in folders

Setting additional functions
First read and observe the introduc

Button ActionFunctionPress brieflyScrolling down in folders
Button 
ActionFunctionPress brieflyScrolling up in folders

Setting additional functions
First read and observe the introductory information and safety warn-ings
on page 18.
› Press the button
MEDIA
→ menu knob
2
» Fig. 1 on page 5.
■ TP - Switches traffic programme on/off
■  - Displays the artist, album and track name from ID3 tag 1)
■ Repeat - Sets repeat play
■ Off - Switches repeat function off
■ Track - Repeats the current track
■ Folder - Repeats all tracks in folder
■ Mix - Random play
■ Off - Random play function off
■ All - Sets random playback of all tracks on the current audio source
■ Folder - Repeats all tracks in folder
■ Scan - Consecutive playback of the tracks for 10 seconds
■ OK - Stops auto-play function at the current track
■ Skip - Selects another track
■ Cancel - Changes to the track played originally

CD
First read and observe the introductory information and safety warn-ings
on page 18.
The device can be used to play audio files saved on a CD.
The internal drive can only be used to play audioCDs (CD-A), CD-Rs and CD-RWs.
Inserting›With the labelled side facing up, insert a CD into the CD slot 12 » Fig. 1 on page 5
until it is automatically drawn in. The play function will start automatically.
Ejecting›
Press the  button – the CD is ejected.
If the ejected CD is not removed within 10 seconds, it is retracted again for safety
reasons. The play function will not start automatically.
WARNINGThe CD player is a laser product. On the manufacturing date, this unit was classified as a class 1 laser product in accordance with the national/interna-
tional standards DIN EN 60825-1: 2008-05 and DHHS Rules 21 CFR,
Subchapter J classified as a class 1 laser product. The laser beam used in this
class 1 laser product is so weak that it poses no risk when operated correctly.
This product is designed such that the laser beam is restricted to the inside of
the device. However, this does not mean that the integrated laser could be
classified as a higher class laser product were the housing to be removed. For
this reason, never remove the housing from the device.
CAUTION
■ Never place DVDs into the internal drive, as this may cause irreparable damage
to the device.■
Never insert CDs with the designation “ Do not insert in drives without a draw-
er ” into the internal drive or use “ EcoDiscs” in the internal drive.
■
After pressing the  button , there is a delay of a few seconds before the CD is
ejected. During this time, the barrier to the CD slot is open.
■
Be sure to wait until the CD has been fully ejected before you try to insert a new
CD. Failure to do so can cause damage to the device drive.
■
If the CD has mechanical damage, is not readable or is inserted incorrectly, the
following message is displayed: CD functionality is restricted. Check the CD and
insert it properly into the drive. If the message is displayed again, try using anoth-
er CD or visit a specialist garage if necessary.
■
If the inside temperature of the device is too high, no CDs will be accepted. The
device switches to the last active operating mode.
■
Never use liquids such as benzine, paint thinner or record cleaner to clean the
surface of the CD, as this may cause damage. 
1)
If there are no artist, album and track names available in the file being played, the folder or file name
is displayed.
21Audio

Page 24 of 45

SKODA OCTAVIA 2013 3.G / (5E) Swing Car Radio Manual ■Never expose the CD to direct sunlight.■Only write on the CD with appropriate writing tools.■
Do not stick anything to the CD!
Note
■Poor or unpaved road surfaces and severe vibrations may ca

■Never expose the CD to direct sunlight.■Only write on the CD with appropriate writing tools.■
Do not stick anything to the CD!
Note
■Poor or unpaved road surfaces and severe vibrations may cause the CD to jump.■Damp (condensation) may affect the device in cold weather or after showers.
This can lead to playback jumps or impair the play function. In such cases, wait
until the moisture has dissipated.■
If a CD is dirty, it should never be cleaned using a circular motion, but rather
from the inside out. Use a soft, lint-free cloth for cleaning. In the case of heavy
contamination, we recommend cleaning the CD with a standard CD cleaner and
leaving to dry.
■
In certain circumstances, CDs protected by copyright or self-made CD-Rs and
CD-RWs may not play, or may only play to a limited extent.
■
The national copyright laws that apply in your country must be observed.
■
The CD player does not include any parts that need to be serviced or repaired. In
the case of a defective CD player, please visit a specialist garage.

SD memory card
First read and observe the introductory information and safety warn-ings
on page 18.
The device can be used to play audio files saved on an SD memory card.
Inserting an SD memory card
›
Push the SD memory card into the memory card slot
14
with the cut-off edge to
the front right until it “locks into place” » Fig. 1 on page 5. The play function will
start automatically.
Removing an SD memory card
›
Press the SETUP button
→ System → Remove SD card safely .
›
Press the inserted SD memory card. The SD memory card moves into the eject
position.
SD memory card empty or data not readable
If an SD memory card is inserted and no data or no legible data has been stored
on the card, the device will not be switched to the SD memory card mode after
loading.
Due to differing quality requirements from different card manufacturers, it is not
always possible to guarantee the playback from SD memory cards.
It may not be possible to play some or all files on the SD memory card, or their
playback may be limited.
CAUTION
■ Only use one-part SD memory cards. If using an SD memory card with an adapt-
er (multipart SD memory cards), vehicle vibrations can cause the SD memory card can fall out of the adapter while driving, and individual card parts can remainstuck in the device.■
We recommend using SD memory cards of class 4 and higher. This guarantees
the fastest possible access to the audio files.
■
Always store the SD cards in suitable cases to protect them from dirt, dust and
other forms of damage.

Bluetooth ®
player
First read and observe the introductory information and safety warn- ings
on page 18.
Audio files can be played and managed on the device via the A2DP and AVRCP
Bluetooth ®
player profiles (audio streaming).
Conditions for successful connection and playback. The Bluetooth ®
player must be paired with your device » page 27.
The audio files must have one of the supported formats » page 19.
Note
■
Bluetooth profiles A2DP and AVRCP (1.0 - 1.3) are supported.■We recommend adjusting the volume on the portable player to the maximum
level.■
The supported playback functions depend on the type of Bluetooth ®
player be-
ing used.

22Audio

Load next 8 pages

Page: < prev 1-8 9-16 17-24 25-32 33-40 41-48 48 next >

headrest airbag off navigation update brake fluid winter tires fuel tank removal