2013 SKODA OCTAVIA Swing Car Radio Manual

■With the buttons on the operating lever » page 8
■ With the buttons and wheels on the multifunction steering wheel » page 8
Note
The buttons and wheels on the multifunction steering wheel will also be lit if the
ignition and the side light are switched on.
Operate via the device display screen
Fig. 2
Displays
First read and observe the introductory information given on page 6.
Display of menus, menu items and functions Currently selected menu/menu item
Previous menu item
Next menu item
Higher-level menu
ABCDFunction of the menu/menu item
Function with “checkbox”
› 
- Function is switched on
› 
- Function is switched off
Selecting menu/menu item
Select by turning the menu knob 2
» Fig. 1 on page 5.
Confirming menu/menu item
Confirm by pressing the menu button
2
.
Confirming function of menu/menu item
Confirm the function of menu/menu item
E
» Fig. 2 by pressing the correspond-
ing key
3
» Fig. 1 on page 5.
Returning to higher-level menu
Return by pressing the BACK
button.
Switching function on/off with “checkbox” Switch the function on/off by pressing the menu button
2
.
Note
■ Greyed out menus or menu items are not enabled or available.■For some menus or menu items, the current setting is displayed, e.g. Distance:
km or Distance: mi .■
If the device is not currently being used, the display will return to the higher-
level menu after a few seconds.
EF7Introductory information

Operate using the buttons on the operating leverFig. 3
Buttons on the control lever
First read and observe the introductory information given on page 6.
The separate menus and menu items displayed in the MAXI DOT display can be
operated with the buttons on the control lever.
Press and hold - open main menu
Press briefly - select individual menu items or menus
Press briefly - select menu item or menu

AAB
Operation via the buttons / wheels on the multifunction steering wheel - Audio menu
Fig. 4
Multifunction steering wheel: control buttons and wheels
First read and observe the introductory information given on page 6.
Each item in the Audio menu displayed in the MAXI DOT display can be operated
with the buttons/wheels on the multifunction steering wheel. 
Control buttons and wheelsButton/
wheel
» Fig. 4ActionRadioMedia
1Press brieflyChange source, change frequency band1Press and hold but- tonSwitch between the Radio and Media operating modes, and open the last context status (e.g. the last radio station or track to be played)a)2Press brieflySwitch off/on tone b)
Start/stop playback2Turn upwardsIncrease the volume2Turn downwardsReduce the volume 8Introductory information

Button/wheel
» Fig. 4ActionRadioMedia
3
Press brieflyGo to the next saved radio station in the station list or go to the station stored in the preset list c)
Interrupt traffic reportSkip to next track a)
3Press and hold but-
tonInterrupt traffic reportFast forward a)4
Press brieflyGo to the previous stored radio station in the station list
or go to the station stored in the preset list Interrupt traffic reportGo to the previous track when pressed within 3s from the change of track,
and to the beginning of the track when pressed 3s after track change a)4Press and hold but-
tonInterrupt traffic reportFast rewind a)5Press brieflyInterrupt traffic reportwithout function5Turn upwardsDisplay list of available stations
Scroll upwardsSwitch to previous track a)5Turn downwardsDisplay list of available stations
Scroll downwardsSkip to next track a)6Press brieflyCall up the main menua)
Does not apply for AUX.
b)
The sound is turned on again by pressing or turning wheel
2
.
c)
Context-dependent selection.
Note■
The button with the symbol  for voice control is not supported by the device.
9Introductory information

Operation via the buttons / wheels on the multifunction steering wheel - Telephone menuFig. 5
Multifunction steering wheel: control buttons and wheels
First read and observe the introductory information given on page 6.
Items in the MAXI DOT display telephone menu can be operated with the but-
tons / dials on the multifunction steering wheel.
The functions of the menu currently active on the phone can be controlled with the buttons and wheels.

Buttons and wheels of the Phone menuButton/wheel
» Fig. 5ActionFunction1Press brieflyMUTE1Turn upwardsIncrease the volume1Turn downwardsReduce the volume2Press brieflyAccept call, end call, entry in the main menu of the telephone, call list, call the dialled contact2Press and hold buttonReject call, redial last call3Turn up/downCall list, previous menu item3Press brieflyConfirm selected menu item4Press brieflyReturn to a previous level in the menu4Press and hold buttonReturn to Main MenuTelephone call function in the MAXI DOT display
Depending on the context, you can select the following functions:
Incoming call ■  Accept - Answer a call
■  Reject - Reject a call
■  Ignore - Ignore a call
Outgoing call
■  End call - End a callCurrent call
■  End call - End a call
■  Mic. off - Microphone off
■  Mic. on - Microphone on
Symbols in the MAXI DOT displaySymbolMeaningCharge status of the phone battery a)Signal strengtha)
10Introductory information

SymbolMeaningA phone is connected with the hands-free system.Missed calls (if there are several missed calls, the number ofcalls is shown next to the symbol)a)
This function is only supported by some mobile phones.
Call list
In the MAXI DOT display, only the call list can be displayed and used.
If the call list includes no entries, the following message appears in the MAXI DOT
display No entries available.
The following symbols are displayed next to each entry in the call list.
SymbolMeaningIncoming callOutgoing callMissed call
Note
■ The button with the symbol  for voice control is not supported by the device.
Device settings

Introduction
This chapter contains information on the following subjects:
Main menu
11
Sound settings
11
Radio settings
12
Media settings
12
Telephone settings
13
Device system settings
13
Update Bluetooth ®
firmware
15
First and foremost, pay attention to the safety instructions » page 4 , Important
notes .

Main menuFig. 6
Main menu Setup
First read and observe the introductory information given on page 11.
Opening the main menu for unit setup
›
Press the button SETUP.
Menu items in the main menu for device setup
■ Sound - Sound setup » page 11
■ Radio setup - Radio settings » page 12
■ Media - Media settings » page 12
■ Telephone - Phone settings » page 13
■ System - System settings » page 13

Sound settings
First read and observe the introductory information given on page 11.
›
Press the SETUP
→ Sound button.
■ Bass - Bass setting
■ Mid - Mid-range setting
■ Treble - Treble setting
■ Balance - Sets the balance between the left and right
■ Fader - Sets the balance between the front and the rear
■ Volume - Volume settings
■ Maximum switch-on volume - Volume after switching on
■ Traffic announcement - sets the volume for the Traffic program alerts (TP) 
11Introductory information

■Speed-dependent vol. adjustment - Speed-dependent volume increase
■ AUX volume - Sets playback volume via an external source
■ Quiet - Low volume
■ Medium - Medium volume
■ Loud - High volume
■ Bluetooth audio - Sets the playback volume via Bluetooth ®
■ Quiet - Low volume
■ Medium - Medium volume
■ Loud - High volume
Radio settings
First read and observe the introductory information given on page 11.
›
Press the button SETUP
→ Radio setup .
■ Radio text - Radio text display on/off
■ Alternative frequency (AF) - Search for alternative frequencies of the station
currently being listened to on/off
■ Arrow keys - Sets the station selection function in RADIO mode
■ Station list - Switches all stations currently in range for the selected fre-
quency band
■ Preset list - Switches only stored stations in the selected frequency band
■ RDS regional - Switches the automatic tracking of related regional stations on/
off ■ Fixed - The selected regional station is kept permanently (another regional
station must be set manually if signal is lost)
■ Automatic - Automatic tracking of regional stations (the device will automati-
cally switch to another available regional station if reception is lost in the re-
gion in question)
■ PTY filter - Selects radio stations by programme type
■ Off - Switches off
■ News - News
■ Music - Music
■ Sport - Sports
■ Culture - Culture
■ Special - Other

■
Station list sort - Sorts the sorted stations
■ Default - by the programme identification (PI code)
■ A-Z - In alphabetical order and also based on the frequency number (if the sta-
tion name changes during the programme, it can be displayed just at the end
of the list)
■ Name of station - Displays the station name
■ Variable - Allows changes to the station name
■ Fixed - The station name is fixed (for the A-Z listing)
■ Delete presets - Deletes the stored stations
Note
■
The Radio Data System (RDS) is used to transfer additional information. The
RDS enables program identification, program type identification (PTY), the recep-
tion of traffic reports (TP) or automatic station tracking, for example. If there is
sufficient reception, RDS-compatible radio stations will be displayed by station
name rather than station frequency.■
The Alternative frequency (AF) function ensures that the best receivable fre-
quency for the selected station is set automatically.
■
The device may not be fully functional in countries where RDS is not adequately
supported. We therefore recommend switching off the RDS regional setting as
well as the Alternative frequency (AF) setting, f applicable. Otherwise, these set-
tings can affect the functionality of the radio.

Media settings
First read and observe the introductory information given on page 11.
›
Press the button SETUP
→ Media .
■ Activate AUX - Switches activation of AUX input on/off
■ Mix/Repeat including subfolders - Switches on/off playback of the tracks in Mix
and Repeat modes including subfolders
■ Display ID3 tags - Switches on/off display of the artist, album and track name in
the device display screen 1)
■ Bluetooth audio - Switches on/off activation of the external audio source via
Bluetooth ®


1)
Regardless of the setting, the ID3 tag is always displayed in the Audio menu in the MAXI DOT display.
12Introductory information

■Choose Bluetooth player - Selects a Bluetooth®
audio device
■ Found devices - Opens a list of paired devices
■ Connect - Connects a paired device without PIN code entry
■ Disconnect - Disconnects the paired device
■ Info - Displays information about the paired device
■ Bluetooth address: ... - Bluetooth ®
address
■ Bluetooth name: ... - Name of the paired device
■ Last connection time: ... - Time of the last connection
■ Delete - Deletes the paired device from the list of paired devices
■ Found devices - Displays the list of available external devices with enabled
Bluetooth ®
function that support the A2DP or AVRCP profile 1)
■ Connect - Connects to an already paired device or starts the pairing process
if the device in question has not yet been paired
■ Disconnect - Disconnects the selected device
■ Search - Searches for available external devices with enabled Bluetooth ®
functions and activated visibility
■ Visibility - Switches the visibility of the Bluetooth ®
device on/off for other de-
vices
■ Hidden - Switches visibility off
■ Always visible - Visibility always on
■ At start-up - Turns on visibility for 5 minutes after switching on the ignition
or until the driving speed has exceeded 5 km/h
■ Delete all paired devices - Deletes all paired devices
Telephone settings
First read and observe the introductory information given on page 11.
›
Press the button SETUP
→ Telephone .
■ Bluetooth setup - Settings for the Bluetooth ®
function
■ Found devices - Opens a list of paired devices
■ Connect - Connects a paired device without PIN code entry
■ Disconnect - Disconnects the paired device
■ Profile - Choice of Bluetooth ®
profiles to be connected
■ All - Connects Bluetooth ®
profiles HFP 2)
, A2DP and AVRCP 1 )
■ Telephone - Connects only the Bluetooth connection ®
profile HFP

■ Info - Displays information about the paired device
■ Bluetooth address: ... - Bluetooth ®
address
■ Bluetooth name: ... - Name of the paired device
■ Last connection time: ... - Time of the last connection
■ Delete - Deletes the paired device from the list of paired devices
■ Found devices - Displays the list of available external devices with enabled
Bluetooth ®
function
■ Connect - Connects to an already paired device or starts the pairing process
if the device in question has not yet been paired
■ Search - Searches for available external devices with enabled Bluetooth ®
functions and activated visibility
■ Visibility - Switches on/off the visibility of the hands-free system to other
Bluetooth ®
devices
■ Hidden - Switches visibility off
■ Always visible - Visibility always on
■ At start-up - Turns on visibility for 5 minutes after switching on the ignition
or until the driving speed has exceeded 5 km/h
■ Delete all paired devices - Deletes all paired devices
■ Bluetooth - Switch on/off Bluetooth ®
function
■ Ring tone - Selects the ring tone if the connected mobile phone does not sup-
port the in-band ringing function 3)
■ Reverse call order - Changes the order in the call list from the oldest to the
most recent calls
■ Contacts format - Sets the contact format display
■ Last name First name - Contact display in the order Last name, First name
■ First name Last name - Contact display in the order First name, Last name
Device system settings
First read and observe the introductory information given on page 11.
›
Press the button SETUP
→ System . 

1)
A2DP and AVRCP are Bluetooth®
profiles that support multimedia functions.
2)
HFP is a Bluetooth ®
profile that supports the functionality of the hands-free system.
3)
The in-band ringing function makes it possible to use the ring tone of your phone as the ring tone.
13Introductory information

■Language - Set the unit language 1)
■ Time/date - Time and date settings
■ Time - Time settings
■ Date - Date settings
■ Summer (DST) - Switches summer time adjustment on/off
■ Time format - Sets the time format
■ 24h
■ 12h
■ Date format - sets up the date format
■ DD.MM.YYYY - Day - Month - Year
■ YYYY-MM-DD - Year - Month - Day
■ MM.DD.YYYY - Month - Day - Year
■ Units - Unit settings
■ Distance - Distance units
■ km - Kilometres
■ mi - Miles
■ Temperature - Temperature units
■ °C - Degrees Celsius
■ °F - Degrees Fahrenheit
■ Volume - Volume units
■ l - Litres
■ gall. (UK) - Gallons (UK)
■ gall. (US) - Gallons (US)
■ Speed - Speedunits
■ km/h - Kilometres per hour
■ mph - Miles per hour
■ Consumption - Consumption units
■ l/100km - Litres per 100 kilometres
■ km/l - Kilometres per litre
■ mpg (US) - Miles per gallon (US)
■ mpg (UK) - Miles per gallon (UK)
■ Gas consumption - Gas consumption units
■ kg/100km - Kilograms per 100 km
■ km/kg - Kilometres per kilogram
■ Bluetooth - Activating/deactivating Bluetooth ®■
Display - screen setting
■ Brightness - Adjusts the brightness of the screen
■ Brightest - brightest level
■ Brighter - brighter level
■ Medium - medium level
■ Darker - darker level
■ Darkest - darkest level
■ Clock in standby mode - Time display on the screen when the ignition is
switched on and the device switched off
■ Remove SD card safely - Safe removal of the SD memory card 2)
■ Remove USB device safely - Safe removal of USB device 3)
■ Factory settings - Restore to factory settings
■ All - All doors
■ Sound - Sound setup
■ Radio setup - Radio settings
■ Vehicle - Vehicle system settings
■ Telephone - Phone settings
■ Media - Media settings
■ System - System settings
■ Driving profile - Choice of driving mode
■ Display off - Activates/deactivates the screen's power-saving mode, where the
screen is black (the screen can be switched on again by pressing any key)
■ System information - Displays system information
■ Software update - Updates the Bluetooth ®
firmware » page 15
■ Versions data - Displays version information
■ Bluetooth software: ... - Version of the Bluetooth ®
firmware
■ Device part number: ... - Part number of the unit
■ Hardware: ... - Version of the hardware used
■ Software version: ... - Version of the software used
■ Copyright - Information on licences and copyrights used1)
The correct display of country-specific characters (e.g. ID3 tag information) can not always be guaran-
teed.
2)
If a sound is currently played from the SD memory card, this function is not active.
3)
If a sound is currently played from the USB data carrier, this function is not active.
14Introductory information