2013 NISSAN X-TRAIL Owner´s Manual


> (GLW    0RGHO 7$@
Outside tem-
perature down
to Engine
coolant
(concentrated) Demineralized
or distilled
water
8C 8F


> (GLW    0RGHO 7$@
8-10
Maintenance anddo-it-yours elf
T32A1308 27-7FBFDE4 2-D934-4EBF-A456-15EF83DB52F C
CHECKING ENGINEOILLEVEL
T32A1308 27-832AD9AE -E088-46FB-B20C-AC C097451A7F
JVM0423X
QR25 andMR20 engine
JVM0435X
R9M engine
1. Park thevehicle onalevel surface andapply the
parking brake.
2. Start theengine andwarm itup until theengine
temperature reachesthenormal operating tem-
perature (approximately 5minutes) .
3. Stop theengine.
4. Wait atleast 10minutes forthe engine oiltodrain
back tothe oilpan.
5. Remove thedipstick andwipe itclean. 6.
Reinsert thedipstick allthe way.
7. Remove thedipstick andcheck theoillevel. It
should bewithin therange
*
C
.
8. Ifthe oillevel isbelow
*
A
, remove theoilfiller cap
and pour therecommended oilinto theopening.
Do not overfill
*
B
.
When fillingtheengine oil,donot remove
the dipstick.
9. Recheck theoillevel withthedipstick.
It is normal toadd some oilbetween oil
maintenance intervalsorduring thebreak -in
period, depending onthe severity ofoperat-
ing conditions.
CAUTION:
The oillevel should bechecked regularly.
Operating yourvehicle withaninsufficient
amount ofoil can damage theengine, andsuch
damage isnot covered bythe warranty.
CHANGING ENGINEOILAND OILFILTER
T32A130827- 17863BB7-3386-4EB2-B54 2-3228E21833C2
WARNING:
. Used oilmust bedisposed ofproperly. Never
pour ordump oilinto theground, canals,
rivers, etc.It should bedisposed ofatproper
waste facilities. NISSANrecommends hav-
ing your oilchanged byaNISSAN dealer.
. Be careful nottoburn yourself, asthe
engine oilmay behot.
. Prolonged andrepeated contactwithused
engine oilmay cause skincancer.
. Avoid directskincontact withused oil.If
contacted, washthoroughly withsoap or hand
cleaner andplenty ofwater assoon as
possible.
. Store usedengine oilinmarked containers
out ofthe reach ofchildren.
V ehicle set-up
GUID-EF 5792C3-0A80 -4BDF-944F-8C21E6 FF05DC
1. Park thevehicle onalevel surface andapply the
parking brake.
2. Start theengine andwarm itup until theengine
temperature reachesthenormal operating tem-
perature (approximately 5minutes) .
3. Stop theengine.
4. Wait atleast 10minutes forthe engine oiltodrain
back tothe oilpan.
5. Raise andsupport thevehicle usingasuitable
floor jackandsafety jackstands.
.
Place thesafety jackstands underthevehicle
jack -up points.
.
A suitable adaptershouldbeattached tothe
jack stand saddle.
6. Remove theplastic engine undercover (if
equipped) .
.
Remove theplastic clipsfromtheundercover.
Engine oiland filter
T32A1308 27-6F86E2B7-D38C-4 534-AFED-674BD03BA210
QR25DE andMR20DD engine:
ENGINE OIL
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
JVM0372X
QR25DE engine
JVM0399X
QR25DE engine
JVM0414X
MR20DD engine
Maintenance anddo-it-yours elf
8-11
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-12
Maintenance anddo-it-yours elf
JVM0421X
MR20DD engine
*
1
Oil filler cap
*
2
Oil drain plug
*
3
Oil filter
1. Place alarge drainpanunder thedrain plug.
2. Remove thedrain plugwithawrench.
3. Remove theoilfiller capand completely drainthe
oil.
If the oilfilter isto be changed, removeand
replace itat this time.
CAUTION:
Waste oilmust bedisposed ofproperly. Check
your local regulations.
4. Remove theplastic coverovertheoilfilter location
by removing thesmall plastic clipsasillustrated.
(For QR25DE engine)
5. Loosen theoilfilter withanoilfilter wrench.
6. Remove theoilfilter byturning itby hand.
7. Wipe theengine oilfilter mounting surfacewitha
clean cloth.
Be sure toremove anyoldgasket remaining onthe
mounting surface. 8.
Apply newengine oiltothe gasket ofthe new oil
filter.
9. Screw inthe oilfilter untilaslight resistance isfelt
and then tighten anadditional 2/3ofaturn to
secure thefilter.
Oil filter tightening torque:
15 to20 N´m
(1.5 to2.0 kg-m, 11to15 ft-lb)
10. Clean andreinstall thedrain plugandnew washer.
Securely tightenthedrain plugwithawrench. Do
not use excessive force.
Drain plugtightening torque:
29 to39 N´m
(3.0 to4.0 kg-m, 22to29 ft-lb)
11. Refill therecommended engineoiland quantity .
(See ªRecommended Fluids/lubricants andcapa-
citiesº (P.9-2) .)
When fillingtheengine oil,donot remove
the dipstick.
12. Securely installtheoilfiller cap.
13. Start theengine.
14. Check thedrain plugforany sign ofleakage.
15. Dispose ofthe used oilinthe proper manner.
Check yourlocal regulations.
16. Check theengine oillevel according tothe proper
procedure. (SeeªChecking engineoillevelº (P.8-
10) .) R9M
engine:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVM0436X
*
1
Oil filler cap
*
2
Oil drain plug
*
3
Oil filter
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
SDI2149
1 Oilfiller element
2 O-ring
3 Oilfilter cover
1. Place alarge drainpanunder thedrain plug.
2. Remove thedrain plugwithawrench.
3. Remove theoilfiller capand completely drainthe
oil.
If the oilfilter isto be changed, removeand
replace itat this time.
CAUTION:
Waste oilmust bedisposed ofproperly. Check
your local regulations.
4. Loosen theoilfilter cover withawrench.
5. Remove theengine oilfilter cover thentheoilfilter
element.
6. Remove therubber O-ring fromthefilter cover.
7. Wipe theentire oilfilter cover withaclean cloth.
Be sure toremove anyoldO-ring remaining onthe
mounting surface. 8.
Apply newengine oiltothe O-ring.
Install thenew O-ring onthe new oilfilter element.
9. Insert theoilfilter element intotheengine oilfilter
cover.
10. Screw inthe oilfilter cover untilaslight resistance
is felt, and then tighten thefilter completely .
Oil filter cover tightening torque:
25 N´m
(2.6 kg-m, 18ft-lb)
11. Clean andreinstall thedrain plugandnew washer.
Securely tightenthedrain plugwithawrench. Do
not use excessive force.
Drain plugtightening torque:
50 N´m
(5.1 kg-m, 36.9ft-lb)
12. Refill therecommended engineoiland quantity .
(See ªRecommended Fluids/lubricants andcapa-
citiesº (P.9-2) .)
13. Securely installtheoilfiller cap.
14. Start theengine.
15. Check thedrain plugforany sign ofleakage.
16. Dispose ofthe used oilinthe proper manner.
Check yourlocal regulations.
17. Check theengine oillevel according tothe proper
procedure. (SeeªChecking engineoillevelº (P.8-
10) .)
After operation
T32A1308 27-3D1A869 1-255E-47E3-9C50-DDE5 E8CFBD36
1. Lower thevehicle carefully tothe ground.
2. Dispose ofwaste oiland filter properly .
PRO TECT ENVIRONMENT
T32A1308 27-208605 74-F3E8-4014 -8CD9-B62C347302 4F
It is illegal topollute drains,watercourses andsoil. Use
authorized wastecollection facilities,including civil
amenity sitesandgarages providing facilitiesfor
disposal ofused oiland used oilfilters. Ifin doubt,
contact yourlocal authority foradvice ondisposal.
The regulations concerningthepollution ofthe
environment willvary from country tocountry.
Maintenance anddo-it-yours elf
8-13
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-14
Maintenance anddo-it-yours elf
T32A130827- 88FE8B68-7E C8-43A9-87D9-027F2C7 FD6F9
JVM0398X
QR25DE engine
1. Crankshaft pulley
2. Drive beltauto-tensioner
3. Water pump
4. Alternator
5. Airconditioner
compressor
SDI1881
MR20DD engine
1. Alternator
2. Drive beltauto-tensioner
3. Crankshaft pulley
4. Airconditioner compressor
5. Water
pump
JVM0439X
R9M engine
1. Water pump
2. Idlerpulley
3. Alternator
4. Crankshaft pulley
5. Drive beltauto-tensioner
6. Airconditioner compressor
Be sure theignition switchisin the ªOFFº position.
Visually inspectthebelt forsigns ofunusual wear,cuts,
fraying orlooseness. Checkregularly forcondition. If
the belt isin poor condition orloose, haveitreplaced
or adjusted byaNISSAN dealer.
GUID-15F3 0443-A743-4 FB1-8DD2-0348CDB 56899
WARNING:
Be sure theengine andignition switchareoff
and that theparking brakeisapplied.
Replace thespark plugs according tothe maintenance
log shown inaseparate maintenance booklet.
If replacement isrequired, contactaNISSAN dealer.
IRIDIUM- TIPPEDSPARK PLUGS
GUID-D07673 71-DD30-47E5-8EA2-C 3004E7D8 712
SDI2020
It is not necessary toreplace theiridium-tipped spark
plugs asfrequently asthe conventional typeofspark
plugs. These sparkplugs aredesigned tolast much
longer thantheconventional typeofspark plugs.
CAUTION:
. Donot reuse theiridium-tipped sparkplugs
by cleaning orre-gapping.
. Always replace withtherecommended ir-
idium-tipped sparkplugs.
DRIVE BELT SP
ARK PLUGS (gasoline engine
models)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
T32A1308 27-25E462 0C-DE5B-4B 75-B071-642C43C0D2 7B
CHECKING PARKING BRAKE
T32A130 827-B3B65B 74-4F6E-4C29-8235-6 9F87496ED8 E
Pedal type
GUID-7CD8 8690-D8CF-43E1-96DF-F C6437C 41039
SDI1391D
From thereleased position,depresstheparking brake
pedal slowly andfirmly .If the number ofclicks isout of
the range listed, seeaNISSAN dealer.
6 to 7clicks
Depressing force196N(20 kg,44lb)
Switch type
GUID-56D 5F3BC-8A8 D-4E65-838 8-10DE21AC 8A13
Periodically checktheholding abilityofthe parking
brake byparking onasteep hilland restraining the
vehicle byusing onlytheparking brake.Ifitdoes not
hold satisfactorily ,see aNISSAN dealer.
CHECKING FOOTBRAKE PEDAL
T32A130 827-1F622C6 B-DF2B-4E16-B146-D21BEC4F89C 4
DI1020MR
WARNING:
See aNISSAN dealerforabrake system checkif
the foot brake pedalheight doesnotreturn to
normal.
With theengine running, checkthedistance between
the upper surface ofthe pedal andthemetal floor.Ifit
is out therange listed, seeaNISSAN dealer.
Depressing force
490 N(50 kg,110 lb)
LHD model RHDmodel
*
A
: 75 mm (3.0 in)or
more
*
A
: 85 mm (3.3 in)or
more
Self-adjusting brakes
T32A130827-D 013BB8E-379E-4FA2-A485- E22643A173 FA
Y our vehicle isequipped withself-adjusting brakes.
The disc-type brakesself-adjust everytimethefoot
brake pedalisapplied.
Brake padwear warning
T32A130827-4 DBFEE6A-552E-465B-9 896-BF7E8484B818
The disc brake padshaveaudible wearwarnings.
When abrake padrequires replacement, itwill make a
high pitched scraping soundwhenthevehicle isin
motion. Thisscraping soundwillfirst occur onlywhen
the brake pedalisdepressed. Aftermore wearofthe
brake pad,thesound willalways beheard evenifthe
brake pedal isnot depressed. Havethebrakes
checked assoon aspossible ifthe wear warning
sound isheard.
Under somedriving orclimate conditions, occasional
brake squeaks, squealsorother noises maybeheard.
Occasional brakenoiseduring lighttomoderate stops
is normal anddoes notaffect thefunction or
performance ofthe brake system.
Proper brakeinspection intervalsshouldbefollowed.
For additional information, seeaseparate maintenance
booklet.
BRAKE BOOSTER
T32A1308 27-44610C 9A-C5C7-4D F3-80B7-849 08CFA7E50
Check thebrake booster function asfollows:
1. With theengine off,depress andrelease thefoot
brake pedalseveral times.When thebrake pedal
movement (distanceoftravel) remains thesame
from onepedal application tothe next, continue on
to the next step.
2. While depressing thefoot brake pedal, startthe
engine. Thepedal height should dropalittle.
3. With thefoot brake pedaldepressed, stopthe
engine. Keep thepedal depressed forabout 30
seconds. Thepedal height should notchange.
Maintenance anddo-it-yours elf
8-15
BRAKES
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
8-16
Maintenance anddo-it-yours elf
4. Run theengine for1minute without depressing
the foot brake pedal, thenturnitoff. Depress the
foot brake pedalseveral times.Thepedal travel
distance willdecrease graduallywitheach de-
pression asthe vacuum isreleased fromthe
booster.
If the brakes donot operate properly,have thebrakes
checked byaNISSAN dealer.
T32A1308 27-1040D2 29-3352-49 17-A316-DB46DD616FA8
WARNING:
. Use only newfluid from asealed container.
Old, inferior, orcontaminated fluidmay
damage thebrake system. Theuseof
improper fluidscandamage thebrake
system andaffect thevehicle's stopping
ability.
. Clean thefiller capbefore removing.
. Brake fluidispoisonous andshould be
stored carefully inmarked containers out
of the reach ofchildren.
CAUTION:
Do not spill thefluid onpainted surfaces. This
will damage thepaint. Iffluid isspilled, washit
off with plenty ofwater
immediately.
JVM0422X
*
A
LHD models
*
B
RHD models
Check thefluid level inthe reservoir. Ifthe fluid is
below theMIN line
*
2
, the brake warning lightwill
illuminate. Addfluiduptothe MAX line
*
1
. (See
ªRecommended Fluids/lubricants andcapacitiesº (P.9- 2)
for recommended typesoffluid.)
If the fluid must beadded frequently ,the system should
be thoroughly checkedbyaNISSAN dealer.
BRAKE FLUID
&RQGLWLRQ
([FHSWIRU&KLQD