2013 NISSAN GT-R Quick Reference Guide

TruNK li D releaS e
Use one of the following methods to unlatch the trunk,
then raise the trunk lid to open:

Push the trunk open request switch
01 under the
trunk handle for more than 1 second.

Press the trunk buttonholD on the NISSAN Intelligent
Key® for more than 1 second.

From inside the vehicle, push down on the trunk lid
release switch

02 located on the left side of the
instrument panel.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
01
02
7
Sea T aDJ uSTM eNTS
To slide the seat forward or backward, push the control
switch

01 forward or backward. To adjust the angle of
the seatback, rotate the knob
01 forward or backward.
SEAT LIFTER (driver’s seat)

To raise or lower the rear portion of the seat, move the
control switch

01 up or down. To raise or lower the
front portion of the seat, push the top or bottom of the
switch

02 .

REAR SEAT ENTRY

Lift up the lever
03 and tilt the seatback forward.
Push the seat adjustment control switch
01 forward

to the desired position. To return the seat to its
original position, tilt the seatback rearward and
push the seat adjustment control switch

01
backward or forward.
For more information, refer to the “Safety –– Seats, seat belts and
supplemental restraint system (section 1)” of your Owner’s Manual.
03
01
02
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.

ouTSiD e M irror coNTrol SwiT ch
To select the right or left side mirror , turn the control
switch

01 right or left.

To adjust the mirror angle, move the control switch

01 up, down, right or left.

To prevent accidentally moving the mirror, turn and
set the switch to the middle “neutral” position.
POWER FOLDING OUTSIDE MIRRORS
Push the switch
02 to the
position to fold the outside rearview mirrors and push the
switch

02 to the
position to unfold the outside rearview mirrors.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
heaDliGhT coNTrol SwiT ch
HEADLIGHT CONTROL

Turn the headlight control switch to the
position
01 to turn on the front parking, side marker, tail, license
plate and instrument panel lights. Turn the switch to the

position
02 to turn on the headlights.


03
01
02
first drive features
8
01
ST arTi NG/ST oPPiNG The e NGiN e
Depress the brake pedal.

Press the ignition switch ST arT/SToP button to
start the engine.
NOTE: It is important to make sure the NISSAN Intelligent
Key
® is with you (that is, in your pocket or purse).

TURNING THE ENGINE OFF

Move the shift lever to the P (P arK) position and apply the parking brake.

Press the ignition switch ST arT/SToP button to turn the engine off.
EMERGENCY ENGINE SHUT OFF
To shut off the engine in an emergency situation while driving, perform o\
ne of the following procedures:

Rapidly push the push-button ignition switch 3 consecutive times in less than 1.5 seconds, or

Push and hold the push-button ignition switch for more than 2 seconds.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
02
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.

wiNDShielD wiPer/waSher Swi Tch
The ignition switch must be in the oN position to
activate the windshield wipers.

Move the lever to the following positions to operate
the windshield wipers:

01a Speed-Sensing Intermittent (i NT) – Push
the lever down. Wipers operate intermittently
and wiper speed varies in accordance with
vehicle speed. Intermittent operation can be
further adjusted by twisting the time control
ring
01B .

02 Low Speed (lo) – Push the lever down for
continuous low-speed operation of wipers.

03 High Speed (hi) – Push the lever down for
continuous high-speed operation of wipers.

04 Mist (MiST) – Push the lever up for one sweep
of the wipers.

05 Pull the lever toward you to activate the washer.
The wipers will operate several times.
For more information, refer to the “instruments and controls (section 2)” of your Owner’s Manual.
9
AUTOLIGHT SYSTEM

The autolight system will automatically turn the headlights on when it is dark and off when it is
light. The system will keep the headlights on for a period of time after you tur\
n the ignition off
and all doors are closed.

To activate the autolight system, turn the headlight control switch to the auTo position
03
then push the ignition switch to
oN. To deactivate the autolight system, turn the headlight
control switch to the oFF,
01 or
position
02 .

HIGH BEAM

Push the headlight control switch forward 04 to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull the
headlight switch back to the original position to select
the low beam. The blue indicator light goes off.

Pull and release the headlight control switch 05 to
flash the headlight high beams on and off.
For more information, refer to the “instruments and controls (section 2)”
of your Owner’s Manual.
04
05
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
04
02
03
MiST
oFF
i NT
lo
hi
05
01a
01B

first drive features
auToMa Tic cli MaTe coNTrolS
01 auT
o BuTT oN/D river’S S iD e Te MPera Ture coNTrol D ial

The auTo mode can be used year round. Press the au To button and the system will
automatically control the inside temperature (automatic cooling and/or \
dehumidified
heating). Air flow distribution and fan speed are also controlled aut\
omatically.

To set the desired temperature, turn the temperature control dial left fo\
r cooler air or right
for warmer air.
02 F
aN SPee D coNTrol D ial/oFF BuTToN

Turn the dial to the left to decrease fan speed or to the right to increa\
se fan speed. Press
the oFF button to turn the system off and to return to automatic control of the\
fan speed.
03 D
ual B uTToN/P aSSeNG er’S S iD e Te MPera Ture coNTrol D ial

Press the D ual button to operate the passenger’s side temperature controls. This button
allows the passenger to independently adjust temperature from driver’\
s side control.

To set the desired temperature, turn the passenger’s side temperature \
control dial left for
cooler air or right for warmer air.
04 a/c B
uTToN

Press the a/c button on the instrument panel to manually turn the A/C on or off.

This feature not only provides cooler air, but it also dehumidifies the air to help avoid
window fogging in cool or cold conditions.
05 M
oD e B uTT oN

Press the M oDe button to select the following air flow outlets:

Air flows from the center and side vents.

Air flows from the center, side, and foot vents.

Air flows mainly from the foot vents.

Air flows from the defroster and foot vents.
06 D
eFroSTi NG/DeFoGG iNG FroNT aND S iD e wi NDowS

Press the defroster control button
to turn the system on. The A/C automatically turns

on when the defroster mode is selected. This feature removes humidity from the air.

Turn the driver’s side temperature control dial
01 left or right to set the desired temperature.

To set the defroster on high, turn the fan speed control dial
02 to the right until fan speed

increases.
010405
0607
0809
0203
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.10

To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.11
07 D
eFroSTi NG/DeFoGG iNG rear wi NDow aND ouTS iD e hea TeD M irror

Push the rear window defroster switch
to turn the system on or off.

This function automatically turns off in approximately 15 minutes.
08 air recircula
TioN BuTToN

Press the air recirculation button to recirculate interior air inside the vehicle.

This setting can be used to assist in avoiding outside odors and in cooli\
ng down the
vehicle’s interior.

The air recirculation mode can only be selected if the air flow mode co\
ntrol is in the
or


positions.

09 ouTS
iD e air circula TioN BuTToN

Press the outside air circulation button
to bring fresh outside air into the vehicle.

This setting helps defog the vehicle’s windows.
For more information, refer to the “instruments and controls (section 2)” of your Owner’s Manual and the “heater and air
conditioner (section 5)” of your Multi Function Display Owner’s Manual.
FM/ aM/XM®* SaTelliTe raD io wiTh cD/DvD Pla Yer
01 vol/oN·oFF coNTrol KN
oB

Press the VOL/ON•OFF control knob to turn the system on or off.

Turn the knob right to increase or left to decrease the volume.
02 Tu
Ne/F olD er/au Dio coNTrol KN oB

To manually tune the radio, turn the T uNe/FolDer/ auDio knob left or right.
03 S
ee K/ca T aND TracK B uTToNS

To scan quickly through each broadcasting station, press the SeeK/ caT button or the
TracK
button to stop at the previous or next broadcast station.

For XM® satellite radio, to switch to the first channel of the previous or next category,
press the
SeeK/ caT button or the TracK button.

To change tracks on a CD, press the SeeK/ caT button or the TracK button.

To rewind or fast forward a track on a CD, press and hold the SeeK/ caT button or
the TracK
button.
02010506
03
04
*XM® Satellite Radio is only available on vehicles equipped with optional XM® Satellite subscription service.

first drive features
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.12
04 ST
aTioN Pre SeT B uTToNS

Twelve stations can be set for the FM band, six for the AM band and eighteen for XM
satellite radio.

To store a station in a preset, you must first select a radio band by pressing the \
FM•AM
button

05 or
SaT button
06 , then tune to the desired AM, FM or XM satellite station.


Then press and hold the desired station preset button (1-6) until the sound is briefly
muted. The station indicator will then display and the sound will resume. Programming\
is
now complete.

To retrieve a previously set station, select the radio band where the preset was stored
then press the corresponding station select button (1-6).
For more information, refer to the “ audio system (section 3)” of your Multi Function Display Owner’s Manual.
clocK S eT/aDJ uSTM eNT
Press the S eTTiNG button
01 , then select the “Clock”

key using the center dial and press the e NTer button

02 to access the following clock settings:

On-screen Clock – When this feature is turned to oN,
a clock is always displayed in the upper right corner of
the Multi Function Display screen. The clock is
automatically adjusted by the GPS system.

Clock Format – Choose either the 12-hour clock display or the 24-hour clock display.

Offset Adjust – Adjust the time by increasing or decreasing per minut\
e.

Daylight Savings Time – Turn this item to oN for daylight savings time application.

Time Zone – Choose the time zone.
For more information, refer to the “other settings (section 7)” of your Multi Function Display Owner’s Manual.
0102

cruiSe coNTrol
The cruise control system enables you to set a
constant cruising speed above 25 MPH.

The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.

To activate the cruise control, push the oN/oFF
switch

01 . The cruiSe
indicator light in the
instrument panel will illuminate.

To set cruising speed, accelerate the vehicle to the
desired speed, push the coaST/S eT switch

02
and release. The S
eT indicator light in the instrument panel will illuminate. Take
your foot off the accelerator pedal. Your vehicle will maintain the set speed.

To reset at a faster cruising speed, push and hold the reS/ accel switch
03 . When the

vehicle attains the desired speed, release the switch.

To reset at a slower cruising speed, push and hold the coaST/S eT switch
02 . Release

the switch when the vehicle slows to the desired speed.

To turn cruise control off without erasing the set speed, push the caN cel switch
04 . The

SeT indicator light in the instrument panel will turn off.

To turn off cruise control, push the oN/oFF switch
01 . Both the cruiSe
indicator light
and the S eT indicator light in the instrument panel will turn off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
01
02
03
04
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.13
Fuel-Filler D oor
The fuel-filler door is located on the right, rear side of the
vehicle.

When the doors of the vehicle are locked or unlocked,
the fuel-filler door is automatically locked or unlocked
at the same time.

Push one of the power door lock switches to unlock
the fuel-filler door from inside the vehicle or push the
door handle request switch to unlock the fuel-filler door from outside the vehicle.

To open the fuel-filler door, press the left side of the door to release the door lock and pull
the door open.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.

Drive coMPuTer
The drive computer is located in the vehicle
information display

01 on the bottom of the

tachometer.

Press the
button
02 to cycle through the
following modes on the vehicle information display:
• MPG – Displays the current fuel consumption.
• MPh – Displays the current vehicle speed.
• cruiSe/MP h – Displays the set cruise control
status.
• MPG/MP h – Displays the average fuel economy
and average speed since the last reset.
• TiMe/MileS – Displays the elapsed time and
distance driven since the last reset.
• raNG e – Displays the estimated distance the
vehicle can be driven before refueling.
• ouTS iD e Te MP – Displays the outside air temperature.
• SeTTi NG – Allows you to set reminders or preferences for alerts, maintenance\

intervals or language displays in the system.
— Press the

button
03 to cycle through the various S
eTTiNG modes.
— Press the

button
02 to choose the selected mode.
• warNiNG – If there are any.
For more information, refer to the “instruments and controls (section 2)” of your Owner’s Manual.
01
02
03
system guide
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.14
BlueT ooTh® haNDS-Free PhoN e SYSTeM
With an overhead microphone and sound transmitted
through the audio system speakers, the Bluetooth®
Hands-free Phone System utilizes Bluetooth wireless
technology and voice recognition to provide hands-
free cellular phone communication.

A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
SYSTEM OPERATING TIPS

Close all windows. Surrounding noises may interfere
with system operation and performance.

Press the
button on the steering wheel to activate voice recognition.
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.