2013 MITSUBISHI OUTLANDER SPORT tires

[x] Cancel search: tires

Page 216 of 602

MITSUBISHI OUTLANDER SPORT 2013 3.G Owners Manual Features and controls3-119
3
2. If the tire pressure monitoring system warning lightremains illuminated after you have been driving for about
20 minutes after you adjust the tire inflation pressure, o

Page 217 of 602

MITSUBISHI OUTLANDER SPORT 2013 3.G Owners Manual 3-120 Features and controls
3
NOTETire inflation pressures vary with the ambient tempera-
ture. If the vehicle is subjected to large variations in ambi-
ent temperature, the tire inflation pressures

Page 266 of 602

MITSUBISHI OUTLANDER SPORT 2013 3.G Owners Manual Features and controls3-169
3
The brake fluid level is low.
 There is a fault in the brake system. 
Park the vehicle in a safe place and 
inspect it.
 If the light still illuminates after the 
insp

Page 355 of 602

MITSUBISHI OUTLANDER SPORT 2013 3.G Owners Manual 4-2 Driving safety
4Driving precaution
N00629300053
Utility vehicles have higher ground clearance and a narrower
track, which enables them to perform in a wide variety of off-
road situations. Because

Page 359 of 602

MITSUBISHI OUTLANDER SPORT 2013 3.G Owners Manual 4-6 Driving safety
4
TiresCheck all the tires for heavy tread wear or uneven wear pat-
terns. Look for stones, nails, glass, or other objects stuck in the
tread. Look for any tread cuts or sidewall cr

Page 363 of 602

MITSUBISHI OUTLANDER SPORT 2013 3.G Owners Manual 4-10 Driving safety
4
Curb weight: the weight of a motor vehicle with standard
equipment including the maximum capacity of fuel, oil,
and coolant.
 Accessory weight: the combined weight (in excess o

Page 485 of 602

MITSUBISHI OUTLANDER SPORT 2013 3.G Owners Manual 6-10 For emergencies
6
Spare tire information
N00849600331
Compact spare tireThe compact spare tire is stowed beneath the luggage floor
board of the luggage compartment. It is designed to save space
i

Page 489 of 602

MITSUBISHI OUTLANDER SPORT 2013 3.G Owners Manual 6-14 For emergencies
6
5. Remove the wheel nuts with the wheel nut wrench, thentake the wheel off. 6. Clean out any mud, etc. on the hub surface (F), hub bolts
(G) or in the installation holes (H) in