2013 MERCEDES-BENZ S-Class ignition

vehicle and do not stand near the vehicle until
the engine has cooled down.
The coolant temperature gauge is in the
instrument cluster on the left-hand side.
Under normal operating conditions and with
the specified coolant level, the coolant
temperature may rise to 248 ‡ (120 †).
! Adisplay message is shown if the coolant
temperature is too high.
If the coolant temperature is over
248 ‡(120 †), do not continue driving. The
engine will otherwise be damaged. Tachometer
The red band in the tachometer indicates the
engine's overrevving range.
! Do not drive in the overrevving range, as
this could damage the engine.
The fuel supply is interrupted to protect the
engine when the red band is reached. Outside temperature display
The outside temperature display is in the
multifunction display (Y page 376).G
WARNING
The outside temperature indicator is not
designed to serve as an ice-warning device
and is therefore unsuitable for that purpose.
Indicated temperatures just above the
freezing point do not guarantee that the road
surface is free of ice. The road may still be icy,
especially in wooded areas or on bridges.
Changes in the outside temperature are
displayed after a shor tdelay. Operating the on-board computer
The on-board computer is activated as soon
as you turn the SmartKey to position 2in the
ignition lock. You can control the multifunction display and
the settings in the on-board computer using
the buttons on the multifunction steering
wheel.
0002
Multifunction display
0003
001F
Rejects or ends a call
Exits phone book/redial memory
0027
Makes or accepts a call
Switches to the redial memory
000F0010
Adjusts the volume or operates the
RACETIMER in AMG vehicles
0029
Mute
0026
001B
Switches on the Voice Control
System; see the separate operating
instructions Displays and operation
375On-board computer and displays Z

Trip menu
Standard display X
Press and hold the 0001button on the
steering wheel until the Trip menu with
odometer 0002and trip odometer 0003is
shown.
Trip computer "From Start" or "From
Reset" The values in the
From Start submenu are
calculated fro mthe start of a journey, while
the values in the From Reset submenu are
calculated from the last time the submenu
was reset (Y page 379).
X Press the 0009or000C button on the
steering wheel to select the Trip menu.
X Press the 000Aor000B button to select
After start or
After reset .
Example: trip computer "From start"
0002
Distance
0003 Time
0026 Average speed
0025 Average fuel consumption
The From Start trip computer is reset
automatically when: R
the ignition has been switched off for more
than four hours.
R 999 hours have been exceeded.
R 9999 miles have been exceeded.
When 9,999 hours or 99,999 miles have been
exceeded, the trip computer is automatically
reset From Reset .
Displaying the range and current fuel
consumption X
Press the 0009or000C button on the
steering wheel to select the Trip menu.
X Press the 000Aor000B button to select
Range .
You can see the current fuel consumption
(except for AMG vehicles) and the
approximate range. The approximate range that can be covered
depends on the fuel level and your current
driving style. If there is only a small amount
of fuel left in the fuel tank, the display shows
a vehicle being refueled
0009instead of the
range.
Digital speedometer X
Press the 0009or000C button on the
steering wheel to select the Trip menu.
X Press 000Aor000B to select the digital
speedometer. 378
Menus and submenusOn-board computer and displays

0002
Gear indicator
0003 Upshif tindicator
0026 Engine oil temperature
0025 Coolant temperature
Upshift indicator up 0003
indicates tha tthe
engine has reached the overrevving range
when in the manual gearshift program.
Upshift indicator up 0003
fades out other
messages until you have shifted up.
When the engine oil temperature is below
80 †, the oil temperature is shown in blue.
Avoid driving at full engine output during this
time.
i S 63 AMG: the status of the ECO start/
stop function (Y page 310) is also shown.
RACETIMER Displaying and starting RACETIMER
G
WARNING
The RACETIMER feature is only for use on
roads and in conditions where high speed
driving is permitted. Racing on publicr oads is
prohibited under all circumstances. The driver
is and must always remain responsible for
following posted speed limits.
You can use the RACETIMER to store lap
times.
With RACETIMER, you cannot use the 000F
and 0010 buttons on the steering wheel to
adjust the volume.
X Press the 0009or000C button on the
steering wheel to select the AMG menu.
X Press the 000Abutton repeatedly until the
RACETIMER is shown. 0002
Gear indicator
0003 Seconds indicator
0026 RACETIMER
0025 Lap
You can start the RACETIMER when the
engine is running or if the SmartKey is in
position 2in the ignition lock.
X To start: press the 000Fbutton to start the
RACETIMER.
X To display the intermediate time: press
the 0010 button to show the intermediate
time.
The intermediate time is displayed for five
seconds.
X To stop: press the 000Fbutton to stop the
RACETIMER.
The RACETIMER interrupts timing when you
stop the vehicle and turn the SmartKey to
position 1in the ignition lock. When you turn
the SmartKey to position 2or 3and then
press the 000Fbutton, timing is continued.
Storing the lap time and starting anew lap
It is possible to store a maximum of sixteen
laps.
X Press the 0010button on the steering
wheel to show the intermediate time during
timing.
The intermediate time is displayed for five
seconds.
X Press the 0010button again within five
seconds.
The displayed intermediate tim eis stored
as a lap time. 382
Menus and submenusOn-board computer and displays

Deactivating/activating ESP
®G
WARNING
Under no circumstances should you
deactivate ESP ®
when the 000CESP®
warning lamp in the instrument cluster
flashes .Proceed as follows:
R when driving off, apply as little throttle as
possible.
R while driving, ease up on the accelerator
pedal.
R adapt yours peed to suit the prevailing road
and weather conditions.
Failure to observe these guidelines could
cause the vehicle to skid. ESP ®
cannot
prevent accidents resulting from excessive
speed.
For further information about ESP ®
, see
(Y page 75).
X Start the engine.
X Press 0009or000C on the steering wheel
to select the Assistance menu.
X Press the 000Aor000B buttonto select
ESP .
X Press the 0011button.
X To deactivate: press0011again.
The 0013 warning lamp in the instrument
cluster comes on. G
WARNING
When the 0013ESP®
OFF warning lamp is lit,
ESP ®
is deactivated.
If the 000C ESP®
warning lamp and the
0013 ESP®
OFF warning lamp remain lit,
ESP ®
is not available due to amalfunction.
When ESP ®
is deactivated or no toperational,
vehicle stability in standard driving
maneuvers is reduced.
Adapt your speed and driving to the prevailing
road conditions and to the non-operating
status of the ESP ®
. X
To activate: press0011again.
The 0013 warning lamp in the instrument
cluster goes out.
Activating/deactivating PRE-SAFE ®
Brake PRE-SAFE
®
Brake is only available in vehicles
with DISTRONIC PLUS.
X Press the 0009or000C button on the
steering wheel to select the DriveAssist menu.
X Press 000Aor000B to select PRE-SAFE Brake .
X Press 0011.
The curren tselection is displayed.
X To activate/deactivate: press0011
again.
When PRE-SAFE ®
Brake (Y page 77) is
activated, the multifunction display shows
the 0001 symbol as long as the HOLD
function is not activated (Y page 346).
Activating/deactivating ATTENTION
ASSIST This function is not available in HYBRID
vehicles.
X
Press the 0009or000C button on the
steering wheel to select the DriveAssist menu.
X Press the 000Aor000B button to select
Attention Assist .
X Press 0011.
The curren tselection is displayed.
X To activate/deactivate: press0011
again.
When ATTENTION ASSIST( Ypage 359) is
activated, the 0004symbol appears in the
multifunction display when the ignition is on. 386
Menus and submenusOn-board computer and displays

Activating/deactivating Blind Spot
Assist You can use the
Blind Spot Assist function to activate or deactivate Blind Spot
Assis t(Ypage 363) or Active Blind Spot
Assist (Y page 367).
X Press the 0009or000C button on the
steering wheel to select the DriveAssistmenu.
X Press 000Aor000B to select Blind Spot
Assist .
X Press the 0011button.
The curren tselection is displayed.
X To activate/deactivate: press the0011
button again.
Activating/deactivating Lane Keeping
Assist You can use the
Lane Keeping Assist function to activate/deactivate Lane Keeping
Assist (Y
page 365) or Active Lane Keeping
Assist (Y page 369).
X Press the 0009or000C button on the
steering wheel to select the DriveAssistmenu.
X Press 000Aor000B to select Lane Keeping Assist .
X Press the 0011button.
The curren tselection is displayed.
X To activate/deactivate: press the0011
button again.
When Lane Keeping Assist or Active Lane
Keeping Assist is activated, the 0001symbol
appears in the multifunction display when the
ignition is on. Service menu
In the Service menu, you have the following
options:
R calling up display messages ( Ypage 390)
R checking the tire pressure electronically
(Y page 505) R
calling up a service due date
(Y page 469)
R checking the oil level (Y page 463) Settings menu
Introduction The
Settings menu can be used for:
R Switching the daytime running lamps on/
off
R switching Adaptive Highbeam Assist on/
off
R showing or hiding the additional
speedometer
R selecting the units for speed and distance
R switching the belt adjustment on/off
R activating/deactivating the radar sensor
system
Switching the daytime running lamps
on/off This function is not available in Canada.
If you have activated the
Daytime running
lights function and the light switch is in the
000E or000D position, the daytime running
lamps are automatically switched on when
the engine is running.
Depending on the ambient light, the following
will additionally light up:
R parking lamps
R tail lamps
R license plate lamp
R side marker lamps
If you turn the light switch to a different
position, the corresponding lights are
switched on. If you switch off the daytime
running lamps at night, make sure that the
light switch is set to 000Aor000D.
The factory setting is On .Menus and submenus
387On-board computer and displays Z

Display messages
General notes
G
WARNING
All categories of messages contain important information which should be take nnote of and,
where a malfunction is indicated, addressed as soon as possible at an authorized Mercedes-Benz
Center.
Failure to repair the condition noted may cause damage not covered by the Mercedes-Benz
Limited Warranty, or result in property damage or personal injury.
Display messages appear in the multifunction display.
Display messages with graphic displays may be shown in simplified form in the Operator's
Manual and may differ from the messages shown in the multifunction display.
Please respond in accordance with the display messages and follow the additional notes in
this Operator's Manual.
Certain display messages are accompanied by an audible warning tone or a continuous tone.
When you stop and park the vehicle, please observe the notes on the HOLD function
(Y page 346) and parking (Y page 327).Hiding display messages
You can hide some display messages with a low priority.
X Press the 0011or0001 button on the steering wheel to hide the display message.
The display message is cleared.
Display messages with a low priority are shown in either yellow or white.
Display messages with a high priority are shown in red.
You cannot hide display messages of the highest priority. The multifunction display shows
these messages continuously until the causes for the messages have been remedied. Message memory
The on-board computer saves certain display messages. You can call up the display messages
in the message memory.
X Press the 0009or000C button on the steering wheel and select the Service menu.
If there are display messages, the multifunction display shows, for example, 2 messages .
X Press the 000Aor000B button to select the entry, e.g. 2 messages .
X Confirm with 0011.
X Press the 000Aor000B button to scroll through the display messages.
When the ignition is switched off, all display messages are deleted, apart from some high-
priority display messages. Once the causes of the high-priority display messages have been
rectified, the corresponding display messages are also deleted. 390
Display messagesOn-board computer and displays

Display messages Possible causes/consequences and
0004 Solutions
The red
0005(USAonly)/000A (Canada only) indicator lamp lights
up .The yellow 0005(USA only )/000A (Canada only) warning lamp
lights up and a warning tone sounds.
The electric parking brake is malfunctioning and the braking effect
is restricted.
While the vehicle is in motion:
X Release the electric parking brake handle.
While the vehicle is stationary:
X Switch off the ignition and turn it back on.
X Release the electric parking brake.
If the display message continues to be displayed:
X Shift the transmission to P.
X Use the folding wheel chock (Y page 480) from the vehicle tool
kit to secure the vehicle against rolling away.
X Consult a qualified specialist workshop. 0005(USA
only)000A(Canada
only)
Parking Brake See
Operator's Manual The yellow
0005(USA only)/000A (Canada only) warning lamp
lights up. Additionally, the red 0005(USA only)/000A (Canada
only) indicator lamp may light up.
The electric parking brake is malfunctioning.
To release:
X Pull the electric parking brake handle.
or
X Pull away carefully.
X Visit a qualified specialist workshop.
To apply:
X Switch the ignition off.
X Pull the electric parking brake lever for at least ten seconds,
until the display message disappears.
If the display message continues to be displayed:
X Shift the transmission to P.
X Use the folding wheel chock (Y page 480) from the vehicle tool
kit to secure the vehicle against rolling away.
X Consult a qualified specialist workshop. 396
Display messagesOn-board computer and displays

Display messages Possible causes/consequences and
0004 Solutions
The red
0005(USAonly)/000A (Canada only) indicator lamp lights
up.
The powe rsupply for the electric parking brake was interrupted.
X Pull the electric parking brake handle.
or
X Pull away carefully.
or
X Pull the electric parking brake handle until the display message
disappears. The red
0005(USAonly)/000A (Canada only) indicator lamp lights
up .The yellow 0005(USA only)/000A (Canada only) warning lamp
lights up.
The electric parking brake is malfunctioning.
X Switch off the ignition and turn it back on.
X Engage or release the electric parking brake.
or
X Pull away carefully.
X Visit a qualified specialist workshop. The yellow
0005(USA only)/000A (Canada only) warning lamp
lights up. The red 0005(USA only)/000A (Canada only) indicator
lamp flashes for approximately ten seconds after the electric
parking brake has been applied or released. It then goes out or
remains lit.
The electric parking brake is malfunctioning, e.g. because of
overvoltage or undervoltage.
X Pull away carefully.
X Visit a qualified specialist workshop.
If there is overvoltage or undervoltage:
X Remove the cause for the overvoltage or undervoltage, e.g. by
charging the battery or restarting the engine.
X Switch the ignition off and on, and then engage or release the
electric parking brake.
If this does not release the electric parking brake:
X Do not drive on.
X Consult a qualified specialist workshop. Display messages
397On-board computer and displays Z