5
Liftgate Release
Use one of the following methods to unlock the liftgate:
• Press the
button
01 on the INFINITI Intelligent
Key™ twice.
• Push the liftgate request switch
02 .
To open the liftgate, once unlocked, push the opener
switch
03 located just above the license plate and pull
the opener handle.
NOTE: It is important to make sure the Intelligent Key is with
you (that is, in your pocket or purse).
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
Seat Adjustments
To slide the seat forward or backward, push the control
switch
01 forward or backward .
To recline the seatback, push the switch
02
forward or backward.
SEAT LIFTER
To adjust the angle of the front portion or height of the
seat, push the front or rear end of the switch
01 up or down.
PO wER LUMBAR SUPPORT (if so equipped for driver’s seat)
To adjust the seat lumbar support, push the front or back end of the switch
03 .
For more information, refer to the “Safety —— Seats, seat belts and supplemental restraint system (section 1)” of your
Owner’s Manual.
03
03
02
02
01
01
Outside Mirror Control Switch
To select the right or left side mirror, turn the control
switch
01 right or left.
To adjust the mirror angle, move the control switch
01 up, down, right or left.
To prevent accidentally moving the mirror, turn and
set the switch to the middle “neutral” position.
REVERSE TILT-DO wN FEATURE
when backing up the vehicle, the right or left outside mirror can be selected to automatically turn
downward to provide better rear visibility.
1. Push the ignition switch to the ON position.
2. Move the shift lever to the r (rEVErSE) position.
3. choose the right or left outside mirror by operating the outside mirror control switch
01 .
4. The selected outside mirror surface moves downward.
when one of the following conditions has occurred, the outside mirror surface will return to its
original position:
• The shift lever is moved to any position other than r (rEVErSE).
• The outside mirror control switch is set to the center “neutral” position.
• The ignition switch is pushed to the OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
6
first drive features
Automatic Drive Positioner (if so equipped)
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner memory.
Follow these procedures to set the memory positions:
• Confirm the shift lever is in the P (PArk) position.
• Push the ignition switch to the ON position.
• Adjust the driver’s seat, steering column and outside mirrors to the desired positions using
the adjusting switches for each feature.
• Push the SE t switch and within 5 seconds, push the memory switch (1 or 2) for at least
1 second.
• The indicator light on the memory switch you select will illuminate for approximately 5 seconds.
• The driver’s seat, steering column and outside mirror positions are now set to your preference.
These memorized positions can also be linked to your INFINITI Intelligent Key™.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
01
