2013 INFINITI EX cruise control

*See your Owner’s Manual for information.
01
INSTRUMENT BRIGHTNESS
cONTROL SwITcH*
02
TRIP cOMPUTER S wITcHES
03
LO w TIRE PRESSURE wARNING LIGHT
04
HEADLIGHT AND TURN SIGNAL cONTROL
05 wINDSHIELD wIPER / w
ASHER SwITcH
06
STEERING wHEEL SwITcHE S FOR
AUDIO* / BLUETOOTH® / NAVIGATION
07
INTELLIGENT cRUISE c ONTROL BUTTONS
08
PUSH BUTTON IGNITION
09 w
ARNING SYSTEMS S wITcH*
10
INTELLIGENT BRAKE ASSIST (IBA)
OFF S wITcH*
11
DYNAMIc DRIVER ASSISTANc E SwIT cH*
12
INTELLIGENT KEY PORT
13
TILT / TELESc OPIc STEERING
wHEEL S wITcH*
14
HOOD RELEASE*
15
VEHIcLE DYNAMIc cONTROL (VDc)
OFF S wITcH*
16 c
ONTROL PANEL DISPLAY ScREEN*
17
AUDIO SYSTEM
18
AUTOMATIc cLIMATE cONTROLS
19
FRONT PASSENGER AIR BAG STATUS LIGHT*
01
Behind
steering wheel Behind
steering wheel
On
steering column
0405
08
0910
16
17
18
19
11
1213
14
02
03
0706
15Behind
steering wheel

12
first drive features
USB/iPod® Interface (models with Navigation System - if so equipped)
The USB jack
01 is located in the center console under

the arm rest.

when a compatible USB memory device or iPod®
is plugged into the USB jack, compatible audio
and video files stored on the device can be
played through the vehicle’s audio system
and front display.
For more information, refer to the “Monitor, climate, audio, phone
and voice recognition systems (section 4)” of your Owner’s Manual.
Conventional (Fixed Speed) Cruise Control

The cruise control system enables you to set a constant
cruising speed once the vehicle has reached 25 mph.

The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.

To activate the cruise control, push the ON/OFF
switch

01 . The CrUISE indicator light in the
instrument panel will illuminate.

To set cruising speed, accelerate the vehicle to the desired speed, push the COAS t/SEt switch


02 and release. The CrUISE SEt
indicator light
in the instrument panel will illuminate.

Take your foot off the accelerator pedal. Your vehicle will maintain the set speed.

To reset at a faster cruising speed, push and hold the ACCEL/rES switch
03 . when the

vehicle attains the desired speed, release the switch.

To reset at a slower cruising speed, push and hold the COAS t/SEt switch
02 . Release the

switch when the vehicle slows to the desired speed.

To cancel the preset speed, tap the brake pedal or push the CANCEL switch
04 .

To turn off cruise control, push the ON/OFF switch
01 . Both the CrUISE indicator light and

the SEt indicator light
in the instrument panel will turn off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
04
03
02
01
01

13
Intelligent Cruise Control (ICC) System (if so equipped)
VEHIcLE-TO-VEHIcLE DISTANcE cONTROL MODE


To set Vehicle-To-Vehicle Distance c ontrol mode,
press the CrUISE ON/OFF button
01 for less
than 1.5 seconds. The CrUISE indicator light
02
will illuminate.

Accelerate to the desired speed.

Push down on the COAS t/SEt switch
03 and release
it. cruise control will be set to the desired speed.

Press the distance button
04 repeatedly to change
the set distance between long, middle, and short.

when a vehicle is not detected ahead of you in the
lane, the set distance and set vehicle speed indicator
lights will illuminate

05 in set mode.

when a vehicle is detected ahead of you in the lane,
the vehicle ahead detection, set distance, and set
vehicle speed indicator lights will illuminate

06 in set mode.

To reset at a faster cruising speed, push up and hold the ACCEL/rES
switch

07 . w
hen the vehicle attains the desired speed, release
the switch.

To reset at a slower cruising speed, push down and hold the COAS t/SEt switch
03 . Release

the switch when the vehicle slows to the desired speed.

To cancel the preset speed, push the CANCEL switch
08 or tap the brake pedal
. The set
vehicle speed indicator
05 will go out.

To turn off cruise control, press the CrUISE ON/OFF button
01 . The
CrUISE indicator light

02 , in the instrument panel, will turn off.
To set conventional (fixed speed) cruise control mode:

while cruise control is off, press the CrUISE ON/OFF
button
01 and hold it down for more
than 1.5 seconds. The CrUISE indicator light will illuminate.

Accelerate to the desired speed.

Push down on the COAS t/SEt switch and release it. The SEt indicator light will illuminate.
c ruise control should be set to the desired speed.
To switch between the two cruise control modes:

when one of the two cruise modes is in use, you must turn the system off, and then turn it on
again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
08
07
03
01
04
0205
06