Use the interface dial to make and enter selections.
45
A U T O \b O O R L O C K SProgram how and when the vehicle doors automatically lock and unlock.
\boor Locks
\b e f a u l t L o c k S e t t i n g
The doors are preset to lock
when your vehicle reaches
about 10 mph.
\b e f a u l t U n l o c k S e t t i n g
All doors are set to unlock
when the driver’s door is
opened.
Changing the \boor Lock Settings
1.Press SETTINGS.
\b. Sele\ft Vehicle Settings. 4.
Sele\ft Auto Door Unlock.
Below is an example of how to change the auto door unlock setting. Make sure the
vehicle is in ON mode. See your Owner’s Manual for other setting options.
3.
Move the interface dial to the
right to Door/Window Setup.
5. Sele\ft from the options.
\f.Press BACK to exit the
menu.
\bote: The driver’s and front passenger’s door can be opened by pulling the inner
front door handle, regardless of the setting. Changing the setting to “All Doors” is
useful for rear passengers.
13 Accord4D TRG_EXL NAVI\fATG_NEW STYLE 7/13/2012 5\f09 PM Page 4
2223
V O I C E R E C O G N I T I O NTo keep your eyes on the road and hands on the wheel, use voice commands for
hands\bfree calling, navigation, audio, and climate control. For a full list of commands,
say “Information ” and “Voice Command Help. ”
How It Works
Control four different systems with the steering wheel buttons and the ceiling
microphone.
To reduce the likelihood of driver distraction, certain manual functions
may be inoperable or grayed out while the vehicle is moving. Voice
commands are always available.
Voice Command Portal
Voice Command Tips
• To hear a list of available commands at any time, press and release the Talk
button, then say “Help.”
• When using the Talk button, wait for a beep, then give a command.
• When the Talk button is pressed, all available voice commands are highlighted in yellow.
• Speak in a clear, natural voice.
• Reduce all background noise.
• Adjust the dashboard and side vents away from the microphone in the ceiling.
• Close the windows.
Pick Up button\f Answer an incoming
call or go to a phone\bspecific voice
portal screen.
Hang Up/Back button\f End a call,
decline an incoming call, or cancel an
operation.
Talk button\f Give phone, navigation,
audio, or climate control commands.
The system recognizes
your command. The system confirms the
command.
Press the Talk button again,
and the system waits for
you to say a command.
When you press the Talk button from any of the main screens (NAV, PHONE,
INFO, AUDIO), the voice portal screen appears and the system gives you examples
of voice commands that can be used. For more examples, see page 24.
13 Accord4D TRG_EXL NAVI\fATG_NEW STYLE 7/13/2012 3\f44 PM Page 13
